View new posts | View your posts AlkalinePROPS - Pack, Wand, and Trap parts Coming Soon !

thegreatcorgi · **Posted:** December 8th, 2010, 12:19 am

i will take a #5 with fries!

julz · **Posted:** December 9th, 2010, 9:03 pm

Id like to put myself down for a #3 ... Rubber Leg hose Connector w/ Hose

cheers!

LUNSFORD · **Posted:** December 9th, 2010, 11:14 pm

Put me down for a #5, I was about to order from gbdan but from all the bad feedback on his thread (waiting over 3 months or never receiving at all) I don't mind waiting till Jan. Plus, from the great pics of your pack shell. I can tell your goggles will be outstanding!

Can't wait to see pics of them

Honker · **Posted:** December 25th, 2010, 4:48 pm

Very interested in the goggles as well

Meph · **Posted:** December 25th, 2010, 7:30 pm

Interested in
5) Resin Ecto-Goggles Cost: $40-$45 *** NEW ***
- No need to paint Olive Drab Integral color
- Cast from real AN/PVS-5a Night Vision Goggles
- Includes foam face padding and head strap.
- Includes all required knobs.

jaguargod · **Posted:** December 25th, 2010, 7:55 pm

I'll take a set of the ecto goggles.

Super Sleuth · **Posted:** December 26th, 2010, 7:47 pm

Could I get a gb1 version of #3? That would be wonderful!

JAllenGrim · **Posted:** December 27th, 2010, 4:41 pm

Hi There!

INTEREST in:

1) Resin Cast Bumper Cost: $30
- Built to stefans plans.
- Cast in high density resin.
- Ready to paint ( may require scuff sanding).
- Will fit the | alkaline | shell.

and

3) Rubber Leg hose Connector w/ Hose Cost: $15-$18 *** NEW ***
- Choose between Yellow GB1 or Clear GB2
- Connector with Integral color accurate to screen used pieces.
- Connector to be rubber.

I'm new here and just starting to build my first pack. Please advise if you need any more information. I'm prepared to order as soon as they're ready to rock. And THANK YOU!

Jeff

Phish4dinner · **Posted:** January 7th, 2011, 6:04 pm

bump in hope for any update on the status of these!!

gbdude1011 · **Posted:** January 8th, 2011, 1:42 pm

PM SENT

Outcast's Ghost · **Posted:** January 9th, 2011, 9:41 pm

I'm in for #5 resin goggles kit.

coasterg · **Posted:** January 10th, 2011, 5:25 am

I'd be interested in the Proton Pack pieces, the bumper, Ion Arm assembly and HGA assembly.

Sledge · **Posted:** January 10th, 2011, 7:17 am

when would this start as a bumper would be nice.
so interested in a Bumper.

BSjohnson · **Posted:** January 21st, 2011, 12:19 pm

Just a bump to see where you're at with these, John.

| alkaline | · **Posted:** January 21st, 2011, 12:47 pm

Don't have time to work on these until all the shells are done. Till then they are in limbo..

- John
| alkaline |

klooloo · **Posted:** March 8th, 2011, 2:12 pm

Hey John, when you finish with the packs and start your resin parts run put me doen for 2 EACH of #1, #2 (GB1), #3 and #4.
You da MAN!

Nick Poppageorgio · **Posted:** March 9th, 2011, 6:03 pm

Put me down for at least one #5, probably two please.

MandoMan · **Posted:** March 9th, 2011, 11:07 pm

Whenever my SC shell comes in and I can measure it, I might be down for a bumper.

Neolarthytep · **Posted:** March 18th, 2011, 1:48 pm

I'm interested in the leg hose connector with hose PLEASE!

janderson0719 · **Posted:** March 18th, 2011, 2:13 pm

Neolarthytep wrote:

I'm interested in the leg hose connector with hose PLEASE!

Gonna be a looong wait

JayStantz · **Posted:** April 13th, 2011, 6:34 pm

I need the Goggles when this happens.

I can't wait!

aburns84 · **Posted:** April 14th, 2011, 6:39 am

I'm interested in a pair of ecto goggles. Just need to see a picture of the whole kit before purchase. I understand it might take a while, but wanted to express interest.

ECTO-DMC · **Posted:** April 14th, 2011, 4:13 pm

Count me in on a Ecto Goggle Kit! Ive Been wanting to upgrade from my welding goggles for some time now..... Just let us know when your ready

positron glider · **Posted:** April 24th, 2011, 8:53 pm

Need #1 and #5
Do I need to PM you with E-mail?

rashielx · **Posted:** May 2nd, 2011, 7:44 pm

Interested in a #1 ... a bumper would be sweet

gEkX · **Posted:** May 7th, 2011, 9:30 am

Intrested in #5 Ecto goggles

ajbernard · **Posted:** May 7th, 2011, 6:23 pm

A bumper for me as well I know your busy so anytime is great! Thanks alot!

Socko525 · **Posted:** June 16th, 2011, 8:46 am

So now that the shells are completed, think we might see some progress on any of these?

I know the shells were just finished, but figured I'd check in. I'm very interested in several of these parts

MRblahface · **Posted:** June 17th, 2011, 9:25 pm

Yeah, are you going to do these?

Kalbuir · **Posted:** June 19th, 2011, 6:40 pm

Hello, I am interested in getting one of your resin bumpers if you still have them availible

Thanks
Dan

Forum rules

View new posts | View your posts AlkalinePROPS - Pack, Wand, and Trap parts Coming Soon !

Who is online