View new posts | View your posts JayStantz - Parts Shop - CLOSED FOR A MONTH approx

JayStantz · **Posted:** November 17th, 2010, 3:55 pm

JayStantz here, as always with parts ready for you. I want you to have a great Proton Pack (and trap) build and a great shopping experience in my shop. I will be adding some new parts every so often, to keep things interesting. I will have most of this stuff available at all times. If I'm out of anything - I'LL post what I'm out of and when more is coming in.

Here is a link to my feedback thread:
http://tinyurl.com/JayStantz-feedback
More feedback:
viewtopic.php?f=32&t=25296
(Mods: merge these if possible, please)

I have been busy with my franchise's pack build lately and everything else, but I'll be getting more parts available for everyone asap.

JasonMcDaniel
20WestwoodDrive
Goffstown,NH03045

My E-Mail/PayPal address is: omenroc@comcast.net

TO ORDER:
Please PM me with your Real Name and address, the items needed and quantities of each item, and your PayPaL / email address, so I can send you a payment request.

Thank you!

CURRENT SUPPLIES AVAILABLE:
(in parenthesis is how many you need for 1 proton pack and wand/thrower)

Ask about "Complete Package Deals" Both Clippards, 11ft. Hose Set. , (3)-SMC's, (3)-L-fittings, (2)-Barbs, and a free Bar Graph Window + Free Priority Shipping!! $100
Complete Hose sets $10 For accurate 4ft red 5/32, 4ft blue, 1ft red 1/4, 1ft green, 1ft yellow.

In stock and ready to go:
Clippard R-331 minimatic valve............$35 dollars (1 for pack) more on order
Clippard R-701 minimatic valve...........$30 dollars (1 for wand) more on order
****More Clippard Valves are on order. Should be getting them mid-week.

Freeland-Wade hose / tubing:
Red 5/32 o.d. ................................................$1 per foot. (4ft for pack/wand)
Blue 1/4 o.d. .................................................$1 per foot. (4ft for pack/wand)
Red 1/4 o.d. .................................................$1 per foot. (1ft for pack/wand)
Green 1/4 o.d. ...............................................$1 per foot. (1ft for pack/wand)
Yellow 5/32 o.d. ............................................$1 per foot. (1ft for pack/wand)

SMC elbows................................................$4 ea. (3 needed for proton pack)
Clippard "L" fitting.......................................$4 ea. (3 needed for GB-2 proton pack) (2 for GB-1)
Clippard SQUARE "L" fitting......................$4 ea. (1 needed for GB-1 proton pack only)
Clippard 1/4 hose "barb" connector........$2 ea. (2 needed for wand)

All items in stock and available!!
***unless noted

Shipping:
Small orders: 1st Class(like hose, fittings, not Clippards) $4
Priority Mail Small Flat-Rate Box (For Clippards) $6
Priority Mail Medium Flat-Rate Box ( for huge orders) 13
To Europe: 1st Class (small parts) $8
To Europe: 1st Class (Clippards) $15
"Complete Package Deals" Includes Priority Express Shipping (to Europe $10 extra)
Questions? Just ask.

My actual green hose being used on a GBfan's thrower..(with some weathering applied)
Notice the flexibility and tight, un-kinked bend.

Some new pictures, notice the BLUE TUBING running through the 1/4 split loom from "L" fitting to "L" fitting, this is what I'm going to start putting in the hose sets for your pack unless you would like a different color, in which case, you must ask me.

My hose doesn't kink, you kinky monkey

Plenty of tubing available

The different tubes, so you can see them better..

NEW PARTS!!
Limited quantities on some items, how many I have noted for each item.

bar-graph-window
On hand level (50) about 2 inch by 5/8 inch, so enough for 2 bar graphs, depending on the install method. $2 shipped (if that's all you want) Free with any purchase of anything else from me..(per request only-so ask, please).. Not 100% accurate maybe, but the closest thing I have found yet. It's a thin, transparent material with that pattern printed on the underside.

Thank you.

Tyger Cheex · **Posted:** November 19th, 2010, 9:45 am

If I had £45 spare I'd snap up two of your clippards, sadly this close to Christmas (and with other costuming things on order) I simply cant afford it!

*gutted*

nolatron · **Posted:** November 19th, 2010, 9:59 am

edit: Duh, I'm an idiot. Ignore this post. :walterpeck:

JayStantz · **Posted:** November 19th, 2010, 7:45 pm

It's totally worth it, that Twinkie looks delicious :-P

Lewis Tully · **Posted:** November 22nd, 2010, 1:32 pm

Hey, I'm gonna be needing some goodies from you soon. Keep your eyes peeled!

Goffcorp · **Posted:** November 23rd, 2010, 11:49 am

Good stuff and very timely for my build.

PM Sent

Goff

JayStantz · **Posted:** December 15th, 2010, 5:44 pm

I wanted to show the different hose barbs made by Clippard. The ones in the middle are the most accurate according to Vinny (kind2311), Well he pointed it out, and I think he is right.

I have some of the really small ones if anyone wants them.

Thanks Vinny for the heads up.

You, you've earned it..

janderson0719 · **Posted:** December 19th, 2010, 3:13 am

Put me down for a Clippard R-331 when they become available to you

JayStantz · **Posted:** December 21st, 2010, 3:59 pm

janderson0719 wrote:

Put me down for a Clippard R-331 when they become available to you

Ok. I have the hose available now, I'm still waiting for the Clippards, though.

Honker · **Posted:** December 25th, 2010, 3:44 pm

PM sent

Honker · **Posted:** December 30th, 2010, 10:27 pm

arrived this afternoon. Thanks a lot!

janderson0719 · **Posted:** January 9th, 2011, 3:07 pm

Received the Clippard earlier this week. Fast shipping! Will be getting the R-701 in the near future when I start work on the wand. Thanks again.

JayStantz · **Posted:** January 21st, 2011, 1:51 pm

I have plenty of Clippard R-701's and R-331's in stock. I just wanted to update, because I have been getting messages asking if they came in yet. They did.

Thanks,

Spengler28 · **Posted:** January 26th, 2011, 1:51 pm

i just received my clippard valve, well packed, super fast shipping A+++!

thanks Jay!

janderson0719 · **Posted:** February 1st, 2011, 1:35 pm

Hey, need a few more things. PM sent.

Sledge · **Posted:** February 3rd, 2011, 9:57 pm

ooops wrong thread

Pony · **Posted:** February 7th, 2011, 8:33 am

PM sent

crazy88 · **Posted:** February 9th, 2011, 5:25 am

PM sent

2501 · **Posted:** February 10th, 2011, 7:08 am

Picked up the parcel tuesday, so the two weeks it took to get across the pond was quite reasonable.

But you sure didn't save on the tape. Took me almost ten minutes to pry it open, using both a pair of scissors and an exacto blade!

JayStantz · **Posted:** February 11th, 2011, 11:11 am

Haha. Sorry I am notorious for using too much tape when I wrap things. Especially Christmas presents, I always wrap up packages that are going over to Europe too, for extra durability as well. I don't trust the Post Men, I always envision them tossing the packages around like they are trying to break them..

Well, I'm glad you got the order and everything made it in one piece.

Thanks again for ordering from me.
-Jay.

Josh Foote · **Posted:** February 14th, 2011, 10:56 am

How much will the shipping be for the Yellow 5/32 o.d?

All I need is a 1 foot section.

Thanks!

JayStantz · **Posted:** February 15th, 2011, 1:16 pm

PM sent.

Thanks.

Yeah if all you need is a piece of hose or something very small, I might be able to ship it for less.

JayStantz · **Posted:** February 17th, 2011, 9:44 am

Hello.

I have made some updates to my For Sale post in light of some new information regarding accuracy of the parts used on the movie packs.

#1) The more accurate hose barbs, which I managed to get a hold of some (get 'em while they last).

#2) The GB-1 Clippard square L-fitting (which I also have available while they last).

#3) The tubing inside the 1/4inch split loom from L-fitting to L-fitting on the proton pack as seen in the Planet Hollywood reference pictures and in the Sony Lobby reference pics.

Thanks.

xtrmn8r17 · **Posted:** February 27th, 2011, 6:03 pm

JayStantz wrote:

I have plenty of Clippard R-701's and R-331's in stock. I just wanted to update, because I have been getting messages asking if they came in yet. They did.

Thanks,

pm sent

MandoMan · **Posted:** February 27th, 2011, 7:24 pm

Do you offer a full pack/wand hose bundle, or just buy the required hose lengths separate? Just curious, maybe you mentioned it and just didn't see it. Either way, I'll definitely be coming to you for the hose soon enough.

JayStantz · **Posted:** February 27th, 2011, 8:40 pm

I listed in parenthesis the amount you'll need of each item to trim out one proton pack for easy reference. Basically at 1 dollar a foot it's $11 for a complete hose set which ain't too bad. I have the prices as low as I can possibly go, that's the best I can do.

Thanks for the interest!! I hope these parts help.

:-)

Jay.

EDIT:

I'm doing Hose sets for $7 dollars a special price. Save $4 dollars off and Free shipping for a limited time!!!

MandoMan · **Posted:** February 27th, 2011, 8:47 pm

I didn't mean a discount or anything, I was just curious if all I had to do was order a "complete set" rather than "1 foot of this, 2 of that". Your prices are great, and that's why I'll be buying from you.

Great price for the clippards too, might have to go all out for real ones rather than resin.

JayStantz · **Posted:** March 20th, 2011, 6:34 pm

To answer Mando Man's question, yes you can just order a hose "set" and I'll know what you will need. It will be $11 dollars.

UPDATE

I have 6 of each Clippard left as of 3-20-2011, and just put in an order for 25 more of each, so they should be in from Clippard before the last 6 of each run out. I have been able to keep all the parts "in stock" for the most part and haven't had too many delays.

Thank you everybody for the orders!!
I hope having these parts on hand is helping the community.

-JayStantz