View new posts | View your posts Custom Made Gibson & Barnes Flight Suit specs

---

Vince, thanks for posting this. Funny that you did actually, because I have been debating about getting a charcoal uniform from them. And now that I've seen your's, as long as I can figure out which color is closest from the fabric swatches they are sending me, I probably will be getting a poly/cotton blend suit from them.

Thanks!

Awesome man. When you do decide on a fabric please post it here so that others can get a good GB2 suit as well. I may get one myself

Now you have the most accurate suit ever. Same people who made the suits for the movie. Lucky you!

INACCURATE !

Nice work Big V. So, you are saying CUSTOM sized to you? What was the price? Is it on the form and I didn't see it? Not in the market now, but you never know (had to sell my Khaki on ebay for $$$) : (

165 clams, Brad from what I was able to find.

Brad,
To clarify, yes this is a completely custom tailored suit and it is made of Nomex. Mine was $314 before tax. Remember that I added things to it and again it is completely custom.

By getting one made of poly/cotton you will lower the price significantly.

The price that dark spectre found is probably a standard off the shelf Nomex suit with no modifications. You can look through those on their website. They also have a clearance section with suits for $99 if you are lucky enough to find your size there. That gets updated weekly so check often.

You will have to get your own quote but I would suspect that a poly/cotton custom suit will range from $200-$270

Hope that clears up any questions about price.

Of course Vince replies while I type out my long winded explanation, but screw it, I'm still posting it. . .



Actually, what Vince had made probably cost him over $300 for it. If you look here, you can see the basic price listing for the "Sentinel Uniform."

I personally think it would be more accurate and better priced if you go with the "Resolute" fabric, which is a poly/cotton blend. The Sentinel custom fit long sleeve P/C suit starts at $212.00. Add side zippers for $12 plus shipping and its still going to be close to $250 for a suit. But it will be a well made, well fitting, suit made by the same company that made the suits for GB2.

Honestly, as badass as Vince's suit is, I could not bring myself to spend that kind of money on something that I would only wear sporadically. I would rather buy 2 khaki Truspecs and cut one of them up to make the leg pockets. Granted that is totally the way to go if you have the money but that's way too rich for my blood( although I'm extremely jealous, lol). Kudos once again Vince, that truly is a badass uni.

Yeah, and I can understand that. I think a suit like this will more appeal to either:

A) people that wear that suits multiple times a year (such as if you are in a "franchise" like Vince and myself)

or

B) if you are too big to comfortably fit into an off the shelf flight suit.

Its a big chunk of change to drop on some fabric but some would deem it worth while.

Agreed, this is definitely not the route to go for the passive fan (not to say that you are one). But as Matt said, if you will be using the suit often and are someone who really values the "accuracy" of your props then I highly recommend getting yourself one.

Personally I was a little too "girthy" and "height disabled" to wear an off the shelf suit. I feel so much better wearing this than my Rotcho.

I totally agree with guys on all points brought up. But still as much as myself and the Columbus Ghostbusters attend events (which 2 or 3 weekends a month) I would be extremely nervous wearing something that expensive. Plus I don't think I'd be married too long if I made a purchase like that Lucky for me, I can fit into a Truspec and can still have a great uniform that's fairly in expensive and if something were to happen to it, I'd only be out 35 - 40 dollars, compared to nearly 10 times that. Also 98% of people that aren't a part this community won't know the difference anyway. I do have to admit that the idea of getting a custom built Dark Gray uniform is so tempting.

Yeah, i have 6 swatches of the poly/cotton blend fabric heading to me now. They are navy, dark navy, and dark grey in both light weight and heavy weight. Once they show up, I'll take pictures of the colors so people can see them and see if we can figure out what color to go with!

no offense taken. Yeah, I have my black and gold SCGB uniform and I don't wear it that often. I like to know options, though. For my GBSI minisodes I wear my beat up barn jacket, and my labcoats. They wouldn't make sense at a con, but this is the comicon SOP for me.

10:00 enter con

10:05 my son has to pee

10:09 reach bathroom

10:09:30 exit bathroom

10:09:30 - 11:30 search each booth one---at---a---time for a certain Star Wars Figure, maybe shake hands with a GB, maybe get a pic with someone

11:31 we're broke, my son instantly becomes tired, we go home

so, eh, not getting a lot of use with the threads : )

Wait, what?

what what, Matt? : )

Nevermind, I had to re-read your original post and the other one I responded to.

Sorry you had to sell your khaki but at least you have your custom ones still.

No offense but could we please keep this thread dedicated to Gibson & Barnes Flightsuits. Post things concerning cost, sizing, and stiching etc.

Well, I got my swatches in the mail today. Good news and bad news. I wanted the poly/cotton blend swatches but instead they sent me nomex. So instead of getting Dary Grey as one of the colors, I got just Grey.

So here are the swatches I got on a piece of white paper. Its Navy standard weight nomex, Dark Navy in light weight, and Grey in 2 different weights.


And here are the 2 navy's sitting on my dyed tru-spec flight suit.
(with flash)


(without flash)


And then a shot of Dan waiting between shots:


But on the plus side, as you can see with my pictures, I think the best color to go with would be just the navy. And hopefully the color doesn't change that much between the poly cotton/blend and the nomex.

And Vince, one thing about your suit.



The ones in GB2 atleast did have the P/P portion on the arm pocket:
(as seen on Ray's arm)


Not a big deal, but figured I'd point it out.

Is there another pic? It just looks to me like its wrinkled.

Yeah, no problem man.


(open the image in another window to see it bigger)

And one of the suits on a mannequin in the lobby of Sony in Cali.


If you also just want to watch gb2, its very visible when Ray and Winston are packing up outside the birthday party scene. There just aren't any good screen shots of it online and I don't have the ability to take screen caps.

yeah vin thats one of the things i wanted to tell you, the GB1 suits have the P/P portion too, just not the flap. i tried to explain that to you when you were ordering the suit but i guess you misunderstood me.

i have a g&b suit due to me this week. its carcoal gb2 ill post when it comes in

It's too bad they don't do wind flaps anymore, or else these really would be super accurate GBII jumpsuits.

Is it the Sentinel Uniform UB2P2 Resolute P/C long sleeve? I'm interested in getting one too.

From what I can tell, and from looking at the Gibson-Barnes suit one of our GaGB members wears (Looking at you, Jesse!), I believe they actually will do the wind flaps now.
I don't know if they're standard (it does show them in the photos on their site), or if they are custom additions at an additional price. I just recently emailed Amy at G-B with a few questions; that was among them. (My other question for her was the possibility of having the suits done in customer-supplied fabric.) I'll be sure to relay all her answers here.

I can't tell very well from the pictures, but it also looks like VinC's suit has the windflap.

DAMN you guys for making me want one of these now! This hobby never ceases to bleed you dry...

Poor Amy, getting all these long winded emails from us nerds. Her inbox is probably filled now and she has a headache waiting for her on Monday haha.

If this is the truth let us know man, one of the reasons I decided to not get a G&B was because on their website they said they no longer offered it.