| Author |
Message |
|
RichLather
|
Posted: December 4th, 2010, 4:06 pm |
|
 |
| Ghosthead |
 |
Joined: November 25th, 2007, 12:57 pm Posts: 189 Location: Lancaster, OH
Karma: 0
|
|
First off, I've looked around at the various makers: Proptronix, Exoray, Replica Props, etc. Every one of these makers is going to have their adherents and detractors, I think. That said, I'm well aware that lights & sound kits are done on a very small scale and there exists the real potential for incompatibility between them, not to mention that these kits are made by hobbyists who have real lives and thus cannot devote their full time to development.
To my knowledge (and if I'm wrong, please correct me) there's no single complete kit from any one maker that covers the cyclotron, power cell, gun lights, and sound for a proton pack. Many of us know about the Arduino-based work-in-progress that certainly seems promising as an all-in-one project, but it remains in the prototype phase.
Let's say I'm ready to get my pack fully outfitted for light and sound. I will learn to solder if need be; I have an iron and a mentor to teach me.
Whose kits should I pursue? Whose kits are in stock right now, for swift delivery in the US? Those of you with full lights and sound in your packs--what combos are you using?
_________________
 "Why worry? Each one of us is carrying an unlicensed nuclear accelerator on his back."
|
|
| Top |
|
 |
|
mburkit
|
Posted: December 4th, 2010, 5:27 pm |
|
Joined: July 29th, 2008, 8:59 pm Posts: 2414 Location: Allentown, PA
Karma: 289
|
To be honest with you, I'm pretty sure no one currently has light kits in stock to ship immediately. Proptronix is on hiatus; R2DEVO's current run is full but will have a new run in the spring; Exoray doesn't even have a thread anymore for his lights so I have no idea if he's still offering them and if so, if he has any currently available; and hyperdyne has been out of stock for a while now. As for a sound solution to go with a light kit, hyperdyne, exoray, and proptronix have some sort of sound kit to go with their kits. There's also the DIY tutorial using replica props sound chip that many people have had luck with, with many different light kits. So that's the current state of electronics within the community.
_________________ My Hero OMNI Pack Build: Click Here My Stantz Pack Build: Click Here My GB2 Pack Build: Click Here My GB:TVG Pack: Click Here
|
|
| Top |
|
 |
|
indianabuster
|
Posted: December 4th, 2010, 7:06 pm |
|
 |
| Newbie |
Joined: October 31st, 2010, 10:01 am Posts: 6
Karma: 0
|
|
I ordered a full kit from exoray a couple weeks ago - wand lights, pack lights, and sound.
He makes them by hand, not to mention his new sound kit is brand new, so it takes a few weeks, but I have very high hopes. I'll let everyone know how it comes out as soon as i receive it, hopefully within the next week.
That's the only full, complete solution that I know of available currently. The only major downside is that it ain't cheap - be ready to shell out around $350 for the full package.
|
|
| Top |
|
 |
|
AJ Quick
|
Posted: December 4th, 2010, 7:20 pm |
|
Joined: January 4th, 2002, 5:00 pm Posts: 16185 Location: Denver, CO
Karma: 814
|
|
Your options:
Gun: Exoray, Hyperdyne Labs, Proptronix, R2DEVO
I own both the Proptronix and R2Devo gun lights. Both are very good. I prefer R2DEVO's detached light bar. It will make things easier. The proptronix circuit sticks out the bottom of the gun. I don't know if Hyperdyne makes them anymore, and Exoray doesn't have a listing for them.
Pack: Exoray, Hyperdyne Labs, Proptronix, R2DEVO & Jupiter Electronics?
I have owned Hyperdyne Labs pack lights (both versions), Proptronix and R2Devo. I prefer the tiny tiny size of the Proptronix and R2DEVO lights. For the price I think R2DEVO might edge out Proptronix. I have also heard about Jupiter Electronics, but know nothing about them.
Sounds: Exoray, Hyperdyne Labs, Proptronix/ReplicaProps, DIY/ReplicaProps & GBFans.com
I don't know if Hyperdyne sells his sound kit anymore. It was something like $500 for a kit. Exoray just came out with a new kit, its plug and play with his light kits. Proptronix has an adapter board for a replica props chip that interfaces with their light setup. GBFans.com (me) is working on a sound kit that will be made to interface with any light kit and is currently aimed at being the cheapest sound kit available.
I think that sums it up. Please let me know if I'm forgetting someone. These the guys I can remember off the top of my head.
_________________ Like Ghostbusters Fans on Facebook: http://www.facebook.com/ghostbustersfans Follow Ghostbusters Fans on Twitter: @gbfans
Boomerjinks wrote: I'm also a fan of the caution striping
|
|
| Top |
|
 |
|
RichLather
|
Posted: December 4th, 2010, 10:32 pm |
|
 |
| Ghosthead |
 |
Joined: November 25th, 2007, 12:57 pm Posts: 189 Location: Lancaster, OH
Karma: 0
|
AJ Quick wrote: Your options:
Gun: I don't know if Hyperdyne makes them anymore Hyperdyne's website lists all of their gun light kits as "temporarily out of stock".
_________________
 "Why worry? Each one of us is carrying an unlicensed nuclear accelerator on his back."
|
|
| Top |
|
 |
|
Canthor
|
Posted: December 7th, 2010, 8:56 pm |
|
 |
| Ghosthead |
 |
Joined: September 9th, 2010, 2:36 pm Posts: 192
Karma: 13
|
I picked up a set of Jupiter pack lights and I am happy with them. you can set the speed of the lights and easily swap out the cyclotron leds for bulbs. viewtopic.php?f=32&t=22602These kits are usually in stock. The gun kit is only a light bargraph, no barrel or stationary gun lights. $79 pack $39 gun bar graph
_________________
 GB1 Proton pack build * Coming soon! * GB2 Proton pack build viewtopic.php?f=2&t=26389 Slime Blower build * Coming soon! * 1:6 scale Ecto 1 build * Coming soon! *
|
|
| Top |
|
 |
|
sbonse
|
Posted: December 8th, 2010, 3:40 am |
|
 |
| Ghosthead |
Joined: October 3rd, 2010, 2:01 am Posts: 356 Location: United kingdom
Karma: 8
|
|
| Top |
|
 |
|
parksdesign
|
Posted: December 19th, 2010, 9:42 pm |
|
 |
| Ghosthead |
 |
Joined: November 6th, 2010, 11:25 pm Posts: 1525 Location: Chattanooga, TN
Karma: 9
|
|
Jupiter electronics is about to release a full pack and gun light kit.
I just purchased one of the pre-release models from Christian and am waiting for it to arrive.
I'll let you know how it is.
_________________ Human Sacrifice...dogs and cats living together...mass hysteria!
Parks's GB1 "Spengler" pack build // viewtopic.php?f=2&t=26200
View my seller feedback // viewtopic.php?f=32&t=24908&p=307586
|
|
| Top |
|
 |
|
slimershomie
|
Posted: December 20th, 2010, 11:22 am |
|
 |
| Ghosthead |
 |
Joined: January 3rd, 2008, 5:52 pm Posts: 635 Location: ALABAMA
Karma: 1
|
RichLather wrote: AJ Quick wrote: Your options:
Gun: I don't know if Hyperdyne makes them anymore Hyperdyne's website lists all of their gun light kits as "temporarily out of stock". Dont get hyperdyne go for exorays the wait will be worth it
_________________ Find Me A Child So That I Might Win Again-Vigosheen EGB Pack
|
|
| Top |
|
 |
|
Slimer7
|
Posted: December 20th, 2010, 11:58 am |
|
 |
| Supporting Member |
 |
Joined: January 19th, 2002, 5:00 pm Posts: 348
Karma: 1
|
|
Hyperdyne labs is my recommendation. For the price, you get high quality and durability. I have had the opportunity to have quite a few customizations done to my kits from Jim at very little if any extra charges. The only down part is that the amplifier is quite bulky and figuring out where to put the speakers is always a challenge,
|
|
| Top |
|
 |
|
Parlett316
|
Posted: January 5th, 2011, 7:27 am |
|
 |
| Ghosthead |
 |
Joined: June 3rd, 2006, 8:45 pm Posts: 82
Karma: 0
|
|
R2DEVO's gun and pack kit is bad ass and easy to install. Great communication whenever I had some dumbass question, same with Replicaprops.
A++++ Would buy again.
|
|
| Top |
|
 |
|
kaison
|
Posted: January 5th, 2011, 8:12 am |
|
 |
| Supporting Member |
 |
Joined: August 1st, 2003, 11:17 am Posts: 107 Location: Clermont Ferrand, FRANCE
Karma: 14
|
Parlett316 wrote: R2DEVO's gun and pack kit is bad ass and easy to install. Great communication whenever I had some dumbass question, same with Replicaprops.
A++++ Would buy again. Yes , I confirm ! R2DEVO have a good electronic systems for Proton packs (and gun)
_________________ http://www.gbfans.com/fans/kaison/
|
|
| Top |
|
 |
|
Slimer7
|
Posted: January 5th, 2011, 10:50 am |
|
 |
| Supporting Member |
 |
Joined: January 19th, 2002, 5:00 pm Posts: 348
Karma: 1
|
|
It looks like hyperdyne labs will be back in business soon. I just got an email from them and I will be placing my order in a week or so. My total for the lights and sound package with my customization requirements will come out to around $625 shipped. Hyperdyne can pretty much do anything you want. And the volume on the pack does get very loud if you want it to.
|
|
| Top |
|
 |
|
Parlett316
|
Posted: January 5th, 2011, 5:35 pm |
|
 |
| Ghosthead |
 |
Joined: June 3rd, 2006, 8:45 pm Posts: 82
Karma: 0
|
|
With that kind of price tag I expect a release. I do want the sound module for the MT500 though.
|
|
| Top |
|
 |
|
coasterg
|
Posted: January 20th, 2011, 11:07 am |
|
 |
| Ghosthead |
Joined: December 29th, 2010, 7:59 am Posts: 130 Location: Melbourne, FL
Karma: 0
|
GAVAL wrote: I believe Zombieamusements is putting out some light kits off of Ebay. I don't know if they have gun kits but they DO have pack kits and light bars for throwers as well as trap light kits.
I've only used their accessories for traps, but I've loved everything I bought from them. Shipping was quick and parts were inexpensive.
Anybody use some Zombie lighting options out there?
One of our new members is considering buying a pack with the Zombie Amusements pack lights so I hope to see those in action soon.
G I ordered the pack lights from him about 3 days ago, should hopefully ship today or tomorrow according to his auction text. I've noticed that communications from him aren't that great since I was considering buying some other items but he hasn't gotten back to me on them. Trying to figure out what gun lights and sound to go with that are available currently. Trying to get my build done before Megacon in mid-March. I wish Replicaprops would release their sd card soundboard, seems like a nice all-in-one sound option since it has the amp built in.
|
|
| Top |
|
 |
|
GBStantz
|
Posted: March 25th, 2011, 2:12 pm |
|
 |
| Ghosthead |
 |
Joined: February 22nd, 2009, 7:15 pm Posts: 316 Location: Chicago, IL
Karma: 0
|
|
I ordered the wand kit from Jupiter. It consists of 3 LEDS and the bar light. NO light by the palm rest, NO orange ear light.
|
|
| Top |
|
 |
|
GBStantz
|
Posted: April 30th, 2011, 7:28 pm |
|
 |
| Ghosthead |
 |
Joined: February 22nd, 2009, 7:15 pm Posts: 316 Location: Chicago, IL
Karma: 0
|
|
Sigh, still no complete light kits available.
|
|
| Top |
|
 |
|
Tyrael
|
Posted: April 30th, 2011, 9:15 pm |
|
Joined: October 2nd, 2010, 10:54 pm Posts: 409 Location: Las Cruces, NEW MEXICO
Karma: 9
|
|
Jupiter Electronics' site shows that they have the full pack and wand light kit in stock, and there's at least one listing for that exact kit on eBay.
_________________ Follow me on Twitter: @govtfundednerd It's the umpteenth blog about government job-related nonsense, nerdy stuff, and cats!
|
|
| Top |
|
 |
|
AJ Quick
|
Posted: April 30th, 2011, 9:25 pm |
|
Joined: January 4th, 2002, 5:00 pm Posts: 16185 Location: Denver, CO
Karma: 814
|
|
I would strongly recommend against Hyperdyne Labs.
Overpriced and outdated.
_________________ Like Ghostbusters Fans on Facebook: http://www.facebook.com/ghostbustersfans Follow Ghostbusters Fans on Twitter: @gbfans
Boomerjinks wrote: I'm also a fan of the caution striping
|
|
| Top |
|
 |
|
Lucas Hardwick
|
Posted: May 1st, 2011, 1:15 am |
|
 |
| Newbie |
 |
Joined: April 23rd, 2011, 4:25 pm Posts: 31
Karma: 0
|
|
I purchased a pack light kit from jupiterstore.com... They seem good to me, but then again, I'm pretty new at this. I'd love to find an inexpensive sound kit. Haven't managed to locate one yet. Could this be added later?
_________________ "Are you, Alice, menstruating right now?"
|
|
| Top |
|
 |
|
Skyknight
|
Posted: May 1st, 2011, 7:58 am |
|
 |
| Ghosthead |
 |
Joined: September 16th, 2010, 8:28 am Posts: 145 Location: Niederbrechen, Germany
Karma: 4
|
Lucas Hardwick wrote: I purchased a pack light kit from jupiterstore.com... They seem good to me, but then again, I'm pretty new at this. I'd love to find an inexpensive sound kit. Haven't managed to locate one yet. Could this be added later? The pack and gun light kits from jupiter are really good for the price. The only inaccuracy I see on them is that in the movies the vent light doesn't flicker. I'm saving to get a gunlight kit from jupiter, too(only gun bc I've found a cheaper way to make the pack lights from LED chasers) You can always add sound later, but you'll have to exchange the switches if you want to operate them with the same switches you start the light.
_________________ Ghostbusters3 is like the Duke Nukem of movie fans!
|
|
| Top |
|
 |
|
GBStantz
|
Posted: May 1st, 2011, 3:18 pm |
|
 |
| Ghosthead |
 |
Joined: February 22nd, 2009, 7:15 pm Posts: 316 Location: Chicago, IL
Karma: 0
|
Tyrael wrote: Jupiter Electronics' site shows that they have the full pack and wand light kit in stock, and there's at least one listing for that exact kit on eBay. Like I said, I bought the Jupiter gun kit, and it's missing 2 lights, the front light by the palm rest and the gun ear light. Its not accurate.
|
|
| Top |
|
 |
|
jackdoud
|
Posted: May 1st, 2011, 5:55 pm |
|
Joined: March 18th, 2002, 5:00 pm Posts: 3124 Location: Norristown, PA
Karma: 201
|
|
| Top |
|
 |
|
jackdoud
|
Posted: May 2nd, 2011, 4:05 pm |
|
Joined: March 18th, 2002, 5:00 pm Posts: 3124 Location: Norristown, PA
Karma: 201
|
GBStantz wrote: How so? Stunt packs only had the slo-blo lit. The only time the white hat light next to the clippard is seen lit in GB1 is the close up shot of the hero thrower during the roof top scene. That is also the only time the yellow bargraph is seen moving in GB1. The orange gun ear hat lights are only seen lit in the ballroom and on the rooftop. I have yet to go through GB2 so I don't know what if any differences there may be in that movie. As I said, accuracy totally depends on what version of the pack you're trying to replicate.
_________________ THE BANNINGS WILL CONTINUE UNTIL MORALE IMPROVES
Jack Doud http://www.bloody-plastic.com/costumes.html
My Oddball props: Statue of Liberty Controller, Slime Scoop, Keymaster Colander Helmet, KUD Meter.
|
|
| Top |
|
 |
|
GBStantz
|
Posted: May 2nd, 2011, 9:06 pm |
|
 |
| Ghosthead |
 |
Joined: February 22nd, 2009, 7:15 pm Posts: 316 Location: Chicago, IL
Karma: 0
|
|
So its accurate if you ignore the lights we know are there because we don't have screen caps of them being used in both movies. Understood.
|
|
| Top |
|
 |
Who is online |
Users browsing this forum: No registered users and 18 guests |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|