View new posts | View your posts Real Sanyo Calculator Board Discussion

JoeLuna33 · **Posted:** September 18th, 2011, 7:45 am

Check this out guys. I found this board in a box I got that also had 2 complete -808d's!

By joeluna33 at 2011-09-17

By joeluna33 at 2011-09-17

More pictures to come...

noslliT · **Posted:** September 18th, 2011, 8:03 am

Whaaaat yo sell me the other 808 joe ; )

JoeLuna33 · **Posted:** September 18th, 2011, 8:40 am

Sorry guys both 808's are spoken for. Myself and Vincenzo330 are the proud new owners.

Vincenzo330 · **Posted:** September 18th, 2011, 9:13 am

JoeLuna33 wrote:

Check this out guys. I found this board in a box I got that also had 2 complete -808d's!

More pictures to come...

Pictures you say?

And here's the 2nd 808D which we've begun modifying to make screen accurate.

Phish4dinner · **Posted:** September 18th, 2011, 9:24 am

Just pour more salt in the wound why dontcha?!? :lol:

Vincenzo330 · **Posted:** September 18th, 2011, 9:29 am

If it's any consolation, it's taken the better part of 2 years to find these.

noslliT · **Posted:** September 18th, 2011, 11:19 am

AWESOME.

SabaSka109 · **Posted:** September 18th, 2011, 11:35 am

Very nice...I have an 808d and an 802d. Sadly, my 808d has the digital display without the nixies, just like one of the two you have pictured.

Filandrius · **Posted:** September 18th, 2011, 3:10 pm

I have an 82D, and it's really a great alternative to the real thing. Highly recommended!

Kingpin · **Posted:** September 18th, 2011, 4:05 pm

Brilliant to finally see another accurate one photographed, it's helped clear up a few details I was still a bit sketchy on (like that odd round thing beneath the 1st black chip on the left).

Vincenzo330 · **Posted:** September 18th, 2011, 4:24 pm

If you want to see any more components just ask. I'm gonna re-shop that underside picture to make a new gizmo template as soon as I get a chance.

Kingpin · **Posted:** September 18th, 2011, 4:29 pm

I'll definitely let you know. If only these photos had shown up when I was making my new Gizmo.

Does the one pictured have the socket for the coiled cable like some of the others have had?

Vincenzo330 · **Posted:** September 18th, 2011, 5:26 pm

No, there's no socket at all. I'm questioning as to whether or not there actually is one or if it was added after the fact.

JoeLuna33 · **Posted:** September 18th, 2011, 6:14 pm

SabaSka109 wrote:

Very nice...I have an 808d and an 802d. Sadly, my 808d has the digital display without the nixies, just like one of the two you have pictured.

Wait until you see the mod we are doing on an 808d with the digital display.....

Vincenzo330 wrote:

No, there's no socket at all. I'm questioning as to whether or not there actually is one or if it was added after the fact.

I agree as we got two 808d's with two differant board layouts. It appears to me that the "socket" was added by the studio.

Demon Vice Commander · **Posted:** September 19th, 2011, 9:06 am

I can't believe I'm ogling over pictures of old calculator boards....

We're definitely going to need more pictures (mainly the top and sides) and new measurements for the Belt Gizmo page.

Carpeteria · **Posted:** September 19th, 2011, 9:57 am

Anyone have an extra $1200 lying around?

http://www.ebay.com/itm/RARE-HANDHELD-SANYO-ICC-82D-NIXIE-TUBE-VINTAGE-RETRO-CALCULATOR-MINOLTA-MINOLCOM-/120780542238?pt=Calculators&hash=item1c1f14d11e#ht_852wt_1189

jackdoud · **Posted:** September 19th, 2011, 11:13 am

Carpeteria wrote:

Anyone have an extra $1200 lying around?

Why? It's an 82d, not an 808d. :whatever:

Carpeteria · **Posted:** September 19th, 2011, 12:02 pm

As far as I've seen, the 82d and 808d circuit boards look quite similar, and isn't the photo that JoeLuna posted at the top (along with Vince's second photo) of an 82d?

http://www.vintagecalculators.com/html/sanyo_icc-82___icc-0081.html

Plus the title of the thread is "Real Sanyo Calculator Board Discussion", right? So... I guess it seemed sort of relevant?

JoeLuna33 · **Posted:** September 19th, 2011, 12:22 pm

Carpeteria wrote:

As far as I've seen, the 82d and 808d circuit boards look quite similar, and isn't the photo that JoeLuna posted at the top (along with Vince's second photo) of an 82d?

http://www.vintagecalculators.com/html/sanyo_icc-82___icc-0081.html

Plus the title of the thread is "Real Sanyo Calculator Board Discussion", right? So... I guess it seemed sort of relevant?

The picture at the top this thread is an 82d82d that we got along with our 2 808d's. I also have it for sale in the for sale section here on gbfans for about $1000 less than the one linked to on ebay.

jackdoud · **Posted:** September 19th, 2011, 12:47 pm

Carpeteria wrote:

As far as I've seen, the 82d and 808d circuit boards look quite similar, and isn't the photo that JoeLuna posted at the top (along with Vince's second photo) of an 82d?
Plus the title of the thread is "Real Sanyo Calculator Board Discussion", right? So... I guess it seemed sort of relevant?

They share some of the same parts but they look similar only in that they're both nixie calculators. The 82d is just wrong all the way around. Not a bad thing to harvest parts from but if we're gonna talk about accurate calculators we should stick to the 808D and its variants.

Carpeteria · **Posted:** September 19th, 2011, 1:33 pm

I was just going by the OP, which, as JoeLuna confirmed, is a photo of an 82d. I know the 808d is the real deal, but it looks as if several folks have used the 82d board for their gizmos. I'd argue they share more aesthetic similarities than just having nixie tubes as well, but whatever.

madmantrez · **Posted:** September 19th, 2011, 3:11 pm

What would be the most proper socket/cord for the board?

jackdoud · **Posted:** September 19th, 2011, 3:19 pm

madmantrez wrote:

What would be the most proper socket/cord for the board?

Probably the original power cord for the calculator. I used one from an electric shaver for mine.

JoeLuna33 · **Posted:** September 19th, 2011, 9:32 pm

Ok so you all have seen my 808d with the digital screen. If not here it is.

By joeluna33 at 2011-09-19

Vincenzo330 and I decided to modify it to look like the screen used model. Over all the board is the same, but there are so many variations of the 808 board that they all have their own look. So after the mods here is what I have for a GB1 belt gizmo.

By joeluna33 at 2011-09-19

By joeluna33 at 2011-09-19

I am happy and don't think I will need a new gizmo ever again, unless I can get a true nixie 808d board....

JoeLuna33 · **Posted:** September 19th, 2011, 9:35 pm

Oh yeah, and later this week I will have an ICC-808d power cable. We will know for sure if it is the right coiled cord or not!

JoeLuna33 · **Posted:** September 19th, 2011, 10:58 pm

Everyone should check out this page. It appears that we all may have been searching for the wrong calculators. This Minolta Minolcom has the same basic board as the 808d, but the chip layout is identical to the resin boards you can order from Nick-A-Tron. I believe there were many differant style of boards used in the filming of GB1 so who knows whats right or wrong?

http://www.vintagecalculators.com/html/ ... olcom.html

jackdoud · **Posted:** September 20th, 2011, 7:52 am

The Minolcom is a known variant. Spengler28 inadvertantly copied one not too long ago: http://www.gbfans.com/community/viewtopic.php?f=4&t=25940

The problem with the belt gizmo is it changes based on how far into shooting the movie they are. All the NY scenes they have 808d's, rooftop IIRC it's a mix due to stunts and the sedgewick is mostly stunts/replacements.

Kingpin · **Posted:** September 20th, 2011, 12:03 pm

JoeLuna33 wrote:

but the chip layout is identical to the resin boards you can order from Nick-A-Tron

Nick and I based the design of the kit on now-outated and corrected information.

Carpeteria · **Posted:** September 20th, 2011, 12:04 pm

Your gizmo looks amazing, Joe. I don't know what you paid for it, but I'd be afraid to wear it out for fear of it getting bruised somehow.

That Minolcom board is definitely similar, and is the one I also based my styrene board's layout on. I like the look of the nixie digits on that board a little better, as well - less "digital" looking.

madmantrez · **Posted:** September 20th, 2011, 12:50 pm

On the stunt/replacement boards, is it now known what the extra and different tubes were made/came from?

View new posts | View your posts Real Sanyo Calculator Board Discussion

Who is online