View new posts | View your posts janderson0719's 95% done Trap Pedal (Trap Build Soon)

janderson0719 · **Posted:** February 2nd, 2012, 9:48 pm

OK....

This was my first Ghostbuster prop build ever. I start this project back in March 2011, and I'm just now getting around to finishing it because I was occupied by my proton pack/thrower build.

This has GB1 fashion all over it.

Key features:

White 26 pin header
Black D-Sub
Painted screws on Vector Plate
Legris Banjo replica with silver metal screw
Legris Straight
Removed red line on ribbon cable; although, I believe the ribbon cable everyone (including me) uses is not even correct.

noslliT · **Posted:** February 2nd, 2012, 10:37 pm

Good job but the red line on the top is correct.

janderson0719 · **Posted:** February 2nd, 2012, 10:40 pm

noslliT wrote:

Good job but the red line on the top is correct.

Thanks. I've look very close at GB1 shots and can't see it.

If u can show me that would be great.

janderson0719 · **Posted:** February 2nd, 2012, 11:02 pm

I'm basing my assumption from this pic.

I can't see any red line or individual gray lines for that matter.

noslliT · **Posted:** February 2nd, 2012, 11:55 pm

The cable is folded in top and bottom . It's true some details are inferred from the gb2 pedal from PH but the 26 pin cable is correct. The detail of the cable is obscured due to the dark lighting and resolution of the shot.
One other detail is that the far right and left fin of the vector plate is trimmed off the pedal.

janderson0719 · **Posted:** February 3rd, 2012, 12:15 am

Yea...

I might be wrong, but I like the look anyways.

I might change it one day.

janderson0719 · **Posted:** February 3rd, 2012, 1:42 am

noslliT wrote:

Good job but the red line on the top is correct.

Yep. You are right.

I did some further research by looking at the Blu-ray movie. When Ray steps on the pedal, and it moves a bit, you can BARELY see the red line on the right portion of the ribbon cable. Hard to see, but definitely there.

I JUST HAD TO KNOW FOR SURE.

Too everyone else, ignore my red stripe statement in the first post.

RedVirtue · **Posted:** February 3rd, 2012, 2:02 am

This is a nice pedal. :-)

janderson0719 · **Posted:** February 3rd, 2012, 3:16 am

Filandrius · **Posted:** February 3rd, 2012, 7:29 am

That is a GREAT pedal.

Might I inquire where you got that white header?

janderson0719 · **Posted:** February 4th, 2012, 2:36 am

Filandrius wrote:

That is a GREAT pedal.

Might I inquire where you got that white header?

I completely jacked Park's method.

I guess my statement is a little misleading.

Filandrius · **Posted:** February 4th, 2012, 10:52 pm

Oh, perfect. I really thought you had found a real one.

I'm going to try that little modification soon.

bnkpro · **Posted:** March 16th, 2012, 10:37 pm

What did you use for the bellow?

janderson0719 · **Posted:** March 16th, 2012, 11:50 pm

I have no idea.

I bought some from someone on this site.

Jamie Riser · **Posted:** May 18th, 2012, 9:15 am

I am interested in doing my own trap. But I was wondering how do you do the pedal where it actually works? or does it say in the direction kits? I've looked at em but never noticed.

View new posts | View your posts janderson0719's 95% done Trap Pedal (Trap Build Soon)

Who is online