Return to Home Page - Ghostbusters Fans
 


[History] [Revise]V-hook

The V-hook is the name given to the bent metal part attached to the bottom of the thower and its alternate piece attached to the pack's gun mount.

There are various styles of the V-hook.

For GB1 it was made out of four pieces: Roughly a 2" x 2" square, the Male portion of the hook is in 2 pieces that mount to the pack from the inside on the gun mount, and the Female hook that is mounted to the thrower through the face/inside of the hook.

For GB2 it was made out of three pieces: Roughly a 2" x 2" square, the Male portion of the hook is made from one piece both mount to the pack from the inside on the gun mount, and the Female hook that mounted to the thrower through the face/inside of the hook.


These are the GB2 Sony Lobby photos of the Female portion of the V-hook:




This is the GB2 Sony Lobby photo of the Male portion of the V-hook:


This photo illustrates the Square portion of the V-hook, showing that the full hook assembly is made from 3 pieces:



Miscellaneous Images:





This page was last edited by GBRyker61 on December 16, 2012, 2:38 am
Link to this page: http://www.gbfans.com/equipment/proton-pack/part-names/v-hook/

Links Below This Category:

Proton Pack Part Names - http://www.gbfans.com/equipment/proton-pack/part-names/
Attenuator - http://www.gbfans.com/equipment/proton-pack/part-names/attenuator/
Bar Graph - http://www.gbfans.com/equipment/proton-pack/part-names/bar-graph/
Barrel Trigger - http://www.gbfans.com/equipment/proton-pack/part-names/barrel-trigger/
Booster Frame - http://www.gbfans.com/equipment/proton-pack/part-names/booster-frame/
Booster Plug - http://www.gbfans.com/equipment/proton-pack/part-names/booster-plug/
Booster Tube - http://www.gbfans.com/equipment/proton-pack/part-names/booster-tube/
Bumper - http://www.gbfans.com/equipment/proton-pack/part-names/bumper/
Crank Generator (Gearbox) - http://www.gbfans.com/equipment/proton-pack/part-names/crank-generator/
Cyclotron - http://www.gbfans.com/equipment/proton-pack/part-names/cyclotron/
Electrostatic Dissipation Assembly (EDA) - http://www.gbfans.com/equipment/proton-pack/part-names/eda/
Filler Tubes - http://www.gbfans.com/equipment/proton-pack/part-names/filler-tubes/
Front Cylinder - http://www.gbfans.com/equipment/proton-pack/part-names/front-cylinder/
Gun Track Disks - http://www.gbfans.com/equipment/proton-pack/part-names/gun-disks/
Gun Ears - http://www.gbfans.com/equipment/proton-pack/part-names/gun-ears/
Gun Knobs - http://www.gbfans.com/equipment/proton-pack/part-names/gun-knobs/
Gun Mount - http://www.gbfans.com/equipment/proton-pack/part-names/gun-mount/
Gun Track - http://www.gbfans.com/equipment/proton-pack/part-names/gun-track/
Hydrogen Gas Actuator (HGA) - http://www.gbfans.com/equipment/proton-pack/part-names/hga/
Injectors - http://www.gbfans.com/equipment/proton-pack/part-names/injectors/
Instrument Bar - http://www.gbfans.com/equipment/proton-pack/part-names/instrument-bar/
Ion Arm - http://www.gbfans.com/equipment/proton-pack/part-names/ion-arm/
Ion Knob (Shock Mount/Knob) - http://www.gbfans.com/equipment/proton-pack/part-names/ion-knob/
Motherboard - http://www.gbfans.com/equipment/proton-pack/part-names/motherboard/
N-Filter - http://www.gbfans.com/equipment/proton-pack/part-names/n-filter/
Power Cell - http://www.gbfans.com/equipment/proton-pack/part-names/power-cell/
Primary Power Distributor (PPD) - http://www.gbfans.com/equipment/proton-pack/part-names/ppd/
Rear cylinder - http://www.gbfans.com/equipment/proton-pack/part-names/rear-cylinder/
Ribbon Cable Clamp - http://www.gbfans.com/equipment/proton-pack/part-names/ribbon-cable-clamp/
S-hook - http://www.gbfans.com/equipment/proton-pack/part-names/s-hook/
Slo-Blo - http://www.gbfans.com/equipment/proton-pack/part-names/slo-blo/
Synchronous Generator (Spacer) - http://www.gbfans.com/equipment/proton-pack/part-names/synchronous-generator /
Trigger box - http://www.gbfans.com/equipment/proton-pack/part-names/trigger-box/
Trigger tip - http://www.gbfans.com/equipment/proton-pack/part-names/trigger-tip/
Vents - http://www.gbfans.com/equipment/proton-pack/part-names/vents/


 
© 1998-2017 Ghostbusters Fans & Ghostbusters Prop Archive - Created and Written by AJ Quick
"Ghostbusters" and "Ghost-Design" are registered Trademarks of Columbia Pictures Industries Inc.
Send Ghostbusters Fans an Email - webmaster@gbfans.com - Jurassic Jeep - 65 Million Years in the Making - A. Quick CNC - 3 Axis Hobby CNC Routers