Prop:DerGrundel's Ghost Trap

Pedal: The base is made from 3/4" MDF, most of the parts came from GBFans' shop. I made it such that I can add electronics later on. The ever elusive bellows is duct hose from McMaster as per suggestion of noslliT. I dremeled a channel into the MDF base to stick the hose into, epoxied it down; from a scrap piece of 1/4" plywood I made a plug that fit snugly into the hose and epoxied that to the vector plate so that when the plug was fit into the duct hose it kept the vector plate attached to the duct hose. Trap: Here is my foamcore trap built using jt001 and Venkman71's plans. I used some advice posted by nick-a-tron with the foamcore, particularly in applying gloss varnish to the foam, sanding it, and applying bondo to the edges. In retrospect I should have done a few more layers of bondo to get the seems really smooth, but I was in a rush for Anaheim Comic Con, so it'll just have to do for now. The knobs are all from Allied Electronics, the alluminum plates are from MMM, and the vector plate is from right here at GBFans. Hose: The hose I picked up at Lowes, it's 1/4" fuel hose. I just wasn't feeling the 1/4" split loom this time around --DerGrundel (talk)

Gallery

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Comments

<comments />