Here you go: zkFpTLQZsCI At 37:50s Thanks. This looks very detailed. I skimmed through a bit to get to the wand part and will have to watch closely to see which wire specifically is the problem one. This looks like it's very educational in general and I hope doing the fix can be done by a relative ...

How many of you have Matty Collector PKEs / Traps that you are considering selling after this announcement? I don't really see myself wanting to have more than one PKE, or trap, for that matter. I love the more GB1/2 weathering of the Matty Trap (and the knock/bump rumble feature), and the shape of...

The patch turned out great! If you ever happened to due a run of them I’d certainly be interested.

Yes and no I took most of it off using a cutting wheel on a Dremel just being very careful, then used wire cutter snips to get the rest off as much as I could then sanded. Wire Cutters probably weren't the right tool for that but it worked. The hole I just filled in with epoxy, I just taped a piece ...

Also while I'm asking questions... I will also be repainting this once all the work to prep it is done. What is the best paint to use on this (primer and paint)? I also have a few 3D printed parts that will need to be painted also, in order to fill in the gaps and not get that 3d printed look to it ...

ok so I'm finally making my thread on this. Will be starting up again soon to try and finish putting all this together this year hopefully. Last I stopped I pretty much got all the modifications done to the pack itself using spongeface's kit plus adding in some real parts (nothing is permanently mou...

The other thing to note is with my alice frame the 1/4 inch couple nuts went right through the indentations drilled out for screws or some attachment where the lower back brace is. I'm just using the 1/4 washers on either side of the cut out area to get it to fit. They make a large size coupling nut...

I got them at home depot (Left to right) First 2 are what I used as mentioned previously. The last 3 are what I used to attach the alice frame to the motherboard. The 1/4 inch screws for the motherboard you may have to get 2 different lengths depending on your alice frame. I had to for mine. https:/...

ok screws I used to mount the pack to the motherboard using the existing posts: #4 3/4 inch in length (in a red plastic bag) along with a #6 washer (orange bag), I couldn't find a #4 washer but these work. I'm also going to replace the screws that hold the 2 halves together with the brackets since t...

That's exactly what I'm looking for! Are you adding any additional sounds from a board or are you keeping the "stock" spirit sound? For gods sake, if you ever offer this, take my money!!! I am also working on a wand light kit (bar graph, switches and additional wand lights) that will cont...

You're best off mounting brackets to the motherboard and then mounting the ALICE frame to the motherboard,and the pack to the brackets. Using the existing mounting posts will be a pain in the ass in the long run, and I'd be worried whether they'd take the weight with a mobo and ALICE frame. I'm act...

Can some body post a link to this 80% thrower? I would like to get one for my self. Just do a google search for benofkent and the first link is his etsy page, strangely I don't see it for sale at the moment. I’m going to try and start the build thread this weekend, I have to get all the pictures fr...

Cool! I started tearing mine down an and got some of the holes drilled for the real parts. Would definitely be interested in seeing a thread on the wand build also with how you did gbfans soundboard, I've already got spongefaces's kit but how to combine the 2 I am unsure yet, granted I haven't taken...

I’m going that route right now, my wife surprised me a 80% sized wand which should be here sometime next week. The stock wand really is tiny, especially if you’re a bigger guy or have big hands you feel like you’re going to crush it! Keep us updated with how that goes! This is something I've wanted...

So I'm looking into getting your 80% wand printed for myself for my spirit pack but was curious if I wanted to use real parts on it vs the 3d printed ones would there would be any kind of foreseeable problems? I'll probably use a 3d printed clippard valve (still not sure yet) but all the knobs, swit...

nkhex19 wrote:Looks good! Did you replace the faux Clippard fittings with actual Clippard ones?

Looking good! I'll be curious to see how to mount it to the alice frame as thats the biggest question mark for me.

Awesome! knowing that I'd definitely like to switch out the wand that came with it for the one you made if made available somewhere. I'm not going to be selling them but I have put the models up on github for the wand I created. https://github.com/CountDeMonet/ArduinoProtonPack/tree/master/Model/83...

My spirit pack came in. It does look to be 85% or so on the main pack. It's just a bit bigger than my son's pack. I intentionally went with a thinner pack for my son's to save on weight. The wand for my son's pack would look really good with the Spirit pack. Almost perfect size. Maybe even scale th...

Ready to roll! Now, I just need to get a proper wand on this thing. Not sure why I the video isn't embedding, but here's the link showing lights installed: https://youtu.be/EDPOrvkpkxo https://image.ibb.co/kEiM0b/GBMe3.jpg https://image.ibb.co/cbyX6G/GBMe2.jpg Lookin Good! What did you end up doing...

I bought a rothco Alice from my local surplus store as thats all they had. After getting it home and looking it over more thoroughly it just felt off. I asked AJ to see if the ones sold in the shop were the same and this is what he told me: "Ours are not Rothco. The ones we sell are made by Atl...

You never know, getting one of these packs and modding it a bit might be what gives someone the confidence and courage to try a shell or scratch build down the road. Thats why I decided to go with this for now. I've tried to save money for a pack and failed 3 times now as other things come up. So I...

B-Rad what if you get a good piece of wood and trace the pack onto it and cut it and sand it and let that be the motherboard? I am thinking that because it may be a bit before we see someone actually manufacture one just for this. I can be wrong, but at this point it may seem more like a project pa...

Got my spirit pack today aswell and your to do list is pretty much what I'd like to do with mine aswell. I went out and got an alice frame from my local surplus shop today but am gonna wait for a motherboard to hopefully be made available before I mount it. I've seen it done with zip ties on the vid...

Does anyone happen to know if the 4k set if bought at target comes with the extra disc? I stopped to pick it up this morning and the sticker saying there was an extra disc was only on the Blu Ray and not on the DVD or 4k Bundle set.

Thats why I'm waiting until some more things have been identified before I even attempt it. I haven't even made a classic pack yet either so I'm going to start with that even though I've been struggling back and forth on which to do.

I missed the first run of these cause I wasn't sure due to not having seen the movie yet, but I got on this run Just so everyone knows this is a pre-sale, they are due out in November. Also last mentioned as of a week ago they were at 53% sold, so if you think you might want them jump on these while...

So I just opened up my Marshmellow Ray Figure and the tip of the stream that fits into the clear plastic part that fits on the wand broke off with just the littlest touch. Does anyone know if I got in touch with DST if thats something they'd replace?

Yeah, I figured there wouldn't be anything old popping back up... I am curious when they will start discounting the 2 packs and courtroom Egon though. Sallah Exactly why I picked up the 2-packs a month ago. I was waiting to see if they'd maybe go on sale given time but figured they never would so j...

Yea I certainly believe in the you get what you pay for so in that respect I want to make this the best I can make it. I've wanted one of these as I'm sure everyone here has since I was a kid so if that means saving a little longer to get an awesome end result so be it.