GBFans.com

Over at the other forums, these guys used to be free and readily available. Now however, they still can be found with a little no-how and digging around. Since this sub forum is not for the general populace, I decided to do this leg work for us - because I know you will appreciate it.

Credit goes to the original creator of the images (I believe Spegler was his name over there), many, many thanks for them.

I believe these print 1:1, but I'm not 100%. So I'll include sizes, quantity of each, and general location of where they go. All measurements are in inches


Blue hose bracket, 2.5x1 x2




Blue hose bracket, 3.5x.75 x2




By the gray hose, 4x2.5 x1




Bumper, 5x1 x3




Power cable, 4.5x1.5 x1




Dome, 2.5x1.5 x2




Fanbox 2.25x1 x2




Oxygen Tank, 2.75x1.25 x2




Oxygen Tank, 3x2 x2




Oxygen Tank, 9x1 x2




Radome, 4x1 x2




Radome 4.5x1.5 x1




Red Arrow 1.25x.875 x2




Sniffer 4x2 x2




Sniffer/Radome 4x1 x2




Sniffer Tower, 2x1 x1




Sniffer Tower 3x3 x1




Sniffer Tube 6x4 x2




Storage Tube 3x4 x2




Strobe 3x1.5 x1




Grimes Strobe 1.5x1.5 x2


That's all I have from Spengler. Once again, thanks a ton for them. I just wanted to make sure people looking for them could find them - instead of waiting for someone to print them up or what have ya.

Also, if you don't want to go through saving them all, I can upload them to a file sharing service for you. Just PM me.

It should be pointed out that it looks like these were all created in CMYK format, so if you print them without any kind of alterations, your colors will not be as "vivid" as they should be. Blacks are more gray, is what I am saying.

This is a TERRIFIC resource, good job, Jon!

Yes thoses are the labels that Spengler28 (Steve Sevigny )and me DrCaron( Martin Caron) made and with the help of members of theecto1 builder forum .I know many of you want e thoses labels but i still waiting like you for the production .To respect this forum law I cant tel you more for now,I hope to get back to you with good news .

Since we dont find out what was writing on the Ac power cable labels we decide to made a kind of joke with one others famous movie .

Best regards
Martin Caron

I drew all these labels with the help of members of the Ecto 1 builders forum. Obviously the files are in CMYK because those files are only the proofs. The original files are in vector.

Great thread for reference for these labels

So where does the "AC Power cable" label go? It says "power cable"...Which is what?

Are these images available anywhere else? They're missing from the first post in this thread.

I registered an account at http://www.theecto1.com back in early March but the account was never activated on their end.

I'm looking for the artwork for the roof rack decals.

I just joined this forum and I am building a 1/25 scale model of the ECTO 1. I just finished my ECTO 1A and after WEEKS of searching out EVERY label and decal I finished the ECTO 1A with all movie acurate labels. I found your labels here for the ECTO 1 and I was wondering how to get a copy of these?

Since the files wont load anymore, does anyone else have a resource or supplier for these labels?

I'm still searching for these too.... I've looked high and low, only to track a few down. What is the best program to design/recreate them?

Just thought I'd bump this thread. I too am looking for labels for the roof rack in particular. Specifically the ones on the sniffer, white bullet antenna, radar, and yellow tanks. Any and all info anyone can provide is truly appreciated!

Thank you in advance

Hammer wrote:I'm still searching for these too.... I've looked high and low, only to track a few down. What is the best program to design/recreate them?

AJ Quick did an absolute awesome job in photographing his finished Ecto-1, so there are a lot of close ups of the stickers on the roof rack. I'm using it as reference to do mine from scratch. I'm using InDesign, since it seems pretty easy to replicate.

http://www.gbfans.com/equipment/reference/31/

He mentioned on a post that a lot of fans noticed some inaccuracies, but I'm using the stickers as references anyway.
viewtopic.php?f=54&t=5369&hilit=ectomob ... nce+photos

Awwww - man - Sorry for necroing this but... too bad all these images seem to be gone - maybe anybody is able to bring them back up again?

Would be greatly appreciated!

DentArthurDent wrote: ↑October 6th, 2011, 7:04 pm Over at the other forums, these guys used to be free and readily available. Now however, they still can be found with a little no-how and digging around. Since this sub forum is not for the general populace, I decided to do this leg work for us - because I know you will appreciate it.

Credit goes to the original creator of the images (I believe Spegler was his name over there), many, many thanks for them.

I believe these print 1:1, but I'm not 100%. So I'll include sizes, quantity of each, and general location of where they go. All measurements are in inches


Blue hose bracket, 2.5x1 x2




Blue hose bracket, 3.5x.75 x2




By the gray hose, 4x2.5 x1




Bumper, 5x1 x3




Power cable, 4.5x1.5 x1




Dome, 2.5x1.5 x2




Fanbox 2.25x1 x2




Oxygen Tank, 2.75x1.25 x2




Oxygen Tank, 3x2 x2




Oxygen Tank, 9x1 x2




Radome, 4x1 x2




Radome 4.5x1.5 x1




Red Arrow 1.25x.875 x2




Sniffer 4x2 x2




Sniffer/Radome 4x1 x2




Sniffer Tower, 2x1 x1




Sniffer Tower 3x3 x1




Sniffer Tube 6x4 x2




Storage Tube 3x4 x2




Strobe 3x1.5 x1




Grimes Strobe 1.5x1.5 x2


That's all I have from Spengler. Once again, thanks a ton for them. I just wanted to make sure people looking for them could find them - instead of waiting for someone to print them up or what have ya.

Also, if you don't want to go through saving them all, I can upload them to a file sharing service for you. Just PM me.

You could try dropping DentArthurDent a private message, he's still active on the forum and may still have the files.

Necro post here...... he doesn't. He confirmed with me they might possibly exist on an old HDD somewhere, but he has no clue where it went.

I do have those kit for sale in in the sale section of this forum .

Martin

Hey all... I'm looking to add a few missing labels to my 1/6 scale Blitzway Ecto-1. The front bumper features labels placed next to each Grimes strobe light, but I can't for the life of me find a clear image of these labels to print and apply. Can anyone refer me to a decent reference photo or specs on those labels?

Thanks in advance!