User avatar
By bradboss12
#139270
Hey all!

I found my Excel spreadsheet that has a list of proton pack parts. PLEASE tell me if I missed something. I figure when I build one in the future I can keep track of what I have/need. Some of these need to be constructed like the Synchotron, others are store bought like Legris elbows. This is for BOTH the Proton pack and Thrower.


Wand:

green hose
1" plastic tube
banjos (2)
gun box
1" tubes (2) (handles)
1" acrylic tube
white LED (4) (wand)
knobs (2) side
knob (by Clippard)
knob (small)
knob (med)
heat synch
LED covers (4)
orange cover
top knob
grips (2)
rear box
palm rest
green hose mount
gun ears (2)
acrylic tube mount
gun trigger
trigger ring mount
2 toggle switches (small)
2 push button switches (small, red and black)
red hose
Clippard valve
Pack labels
electrical wire
battery box
allen head bolts (8)

Proton pack:
red hose
Clippard valve
Pack labels
electrical wire
battery box
allen head bolts (8)
Synchotron (big "D")
Cyclotron (pan)
bumper
Ion arm
ion arm metal piece
Dale RH-50
Dale 25
legris elbows (3)
Clippard barbs (3)
blue hose
yellow hose
1/4" split loom
7/8" split loom
crank knob
red LED's (4) (cyclo)
blue/white LED (8) (power)
injector tubes (2)
gear box
1.25" rod/tube (filler)
brass fittings (3)
5/32 brass rod/tube (ion)
shock mount
ALICE Frame/straps
dixie clip
gun mount box
1/2" basswood strips
3" lid (p.b.-synch)
ribbon cable
ribbon cable mount
2" lid (synch)
acrylic (4 holes cyclo)
n-filter
booster
booster frame
power cell
motherboard
PPD
HGA
1" washers (cyclo) (4)
mounting blocks (4)
Sage 25 resistor (Ion)
Last edited by bradboss12 on July 7th, 2009, 12:18 pm, edited 2 times in total.
User avatar
By Meph
#139334
Might I suggest breaking the list up into 2 separate lists, Proton Pack and Neutron Wand/Proton Gun/Whichever. It'll make them appear less intimidating and more organized.
User avatar
By mburkit
#139456
I'm not sure if you would want this, but I could post my spread sheet of where I got all my supplies for my pack, along with what each part is and how much they were (without shipping). I also have a grand total (minus s&h) of everything. This list is for my latest pack, so it also has pricing for the materials I used to scratch build my shell.

My only problem with posting what I have is some of the hardware you can get from multiple places so I don't want to endorse one place over another (especially between sellers on this site).

Let me know what you guys think.
User avatar
By mburkit
#139519
bradboss12 wrote:that would be cool. PM me and I'll give you my email. I would like a copy to compare it to. Share the love : )
PM sent, enjoy all the reading. If you want to post it or add any of it to your original post, feel free. Not like its secret information or anything :)
User avatar
By bradboss12
#139574
This post may contain an affiliate link that helps support GBFans.com when you make a purchase at no additional cost to you.

thanks! here is what mburkit posted to me with the parts he bought. Feel free to substitute to save money or spend more money.

Proton Pack Hardware:

http://www.professionalplastics.com

48” x 48” x .125” HIPS polystyrene sheets (2) – 33.63 (each)

Total: $67.26

Lowes.com

1” x 10” PVC Pipe – 2.32
1” x 10” PVC Pipe (thin walled) – 2.32
2” x 10” PVC Pipe – 4.18

Total: 8.82

Amazon.com

Wilton Decorator Preferred 9 by 2 Inch Round Pan – 9.99
Turntable –White – 5.81

Total: $ 15.80

GBFans.com

1/4" split wire loom (2') - 2.50
3/4" splitless loom (6') - 10.00
Crank knob – 16.00

Total: $28.50

GBFans.com forums

Anhcon's V-Hook - 50.00
GB1 Metal Ion Arm (noslliT) - 40.00
Proptronix pack light kit – 60.00
Proptronix gun light kit – 120.00
Bobamatt vinyl labs – 20.00

Total: $290.00

Proptopia.com Forums

GB1 Ribbon Cable (SolidGoldCaddy) - 35.00

Total: $35.00

Clippard.com

Clippard R-701 (1) - 24.23
Clippard R-331 (1) - 29.63
Stupid Handling fee - 10.00

Total: $63.86

Multimediamayhem.net

Aluminum Motherboard (#P004) - 49.00
"L" bracket mounting kit (#P138) – 10.00
Booster Ladder Frame (#P067) - 15.00
Clippard Brass set (#P031) - 16.00
Ribbon cable kit (#P131) – 23.00
5/32" SMC elbows set of 3 (#P098) – 16.00
GB1 3 piece resistor set (#P010) – 12.99
Complete Hose set (#P038) – 10.99
5/32" SMC straight fitting set (#P121) – 14.00

Total: $166.98

http://www.omahas.com

LC-1 Quick Release Strap – 12.95
LC-1 Kidney Padding – 12.95

Total: $25.90

http://www.unclesamsdeals.com

ALICE Pack Frame LC-1 – 36.95

Total: $36.95

Neutrona Wand:

GBFans.com Forums

ThrowingChicken gun kit – 75.00
ThrowingChicken Accessories Bundle – 85.00

Total: $ 160.00

hoseandfittings.com
UNF Nycoil Banjo Elbow (sku 55010) (2) – 4.62 (each)
Total: $9.24
Multimediamayhem.net

Aluminum gun knob set - 35.00
Laser cut Aluminum trigger tip (#P127) – 8.00
Orange light caps (#P125) – 1.00
LED cliplites (#P130) – 4.00
7/8" O.D clear extruded acrylic gun tip with collar (#P096) – 10.00

Total: $58.00

Onlinemetals.com

SCHEDULE 10 STAINLESS STEEL PIPE T-304 (4”) - .50 (per inch)

Total: $2.00

Grand Total: $939.45
User avatar
By Cornelius
#139660
mburkit wrote:Oh good, now everyone can see about how much my pack cost me and how crazy I am for building it . . .
Oh, don't worry about that. I have already spent more than that on my pack + associated stuff and I'm not even halfway the process of building the damn thing. I guess what makes it more expensive for me too is the fact that I need to have the stuff sent across the Atlantic :-)

CK
By Biber
#244891
@The Cool Matt..... Would you take a request to build one of those for someone? I really want one so much, but just dont have the time to build it. With a new born daughter, and a wedding to plan for, I just cant find the time, along with working 2 jobs. Please let me know, I will pay for all the materials obviously, and for your time. Let me know asap! Thanks. my email (which is best way to contact me) r_biberhofer@hotmail.com

Thanks,
Biber

    My Little Pony/Ghostbusters crossover done by my d[…]

    Great work identifying the RS Temperature Control […]

    I read Back in Town #1. Spoilers : Hate to b[…]

    I'd really like to see the new t-shirt unlocks tra[…]