- October 11th, 2016, 9:58 am#4882794
I recently purchased a NinjaTunes2001 light and sound kit, and upon its arrival I saw a couple issues that would require some problem solving.
Most of the problems were easy enough to work around, but the problem giving me the biggest headache is that the board for the wand lights is way too big to fit in the gun box. My solution was to mount the board in the pack and just run the lights up through the loom into the gun. The only problem with this is that the bar graph uses an 18 pin cable that I'd need to be about 7 feet.
So my question is, does anyone know where I could find a 7 foot 18 pin cable or have any other suggestions?
Pics of the kit coming soon
Most of the problems were easy enough to work around, but the problem giving me the biggest headache is that the board for the wand lights is way too big to fit in the gun box. My solution was to mount the board in the pack and just run the lights up through the loom into the gun. The only problem with this is that the bar graph uses an 18 pin cable that I'd need to be about 7 feet.
So my question is, does anyone know where I could find a 7 foot 18 pin cable or have any other suggestions?
Pics of the kit coming soon