Changes to Stefan Plans for Cyclotron/Sync Spacer?
Posted: February 14th, 2018, 8:30 am
Hello all;
Back in October I made this 3d printed pack for Halloween;
https://i.imgur.com/hPEQ3Ek.jpg
It was based off of Stefan's plans (downloaded from Thingaverse, not self made). My goal, like a lot of people, was to try getting as close to screen accurate as possible. However after I had time to really dig into the dimensions of the pack, I realized how much the Stefan plans were from the actual props. I have gotten some good information on most of the parts of the pack from looking at reference pictures and threads such as this one:
viewtopic.php?f=2&t=34913&hilit=UPDATIN ... &start=300
and this one:
viewtopic.php?f=2&t=36998&p=4892882&hil ... n#p4892882
I am currently building my own set of STLs based on Stefan's plans and modified from online references. Specifically the pack in the Sony lobby and the measurements they took of said pack. This thread: viewtopic.php?f=2&t=34913&hilit=UPDATIN ... &start=300
This thread: viewtopic.php?f=2&t=36998&p=4892882&hil ... n#p4892882
and the Murray pack images in this thread: viewtopic.php?f=2&t=39517&p=4899193&hil ... o#p4899193
My current updated design looks like this (it currently has the double HGA from the comic book)
Though I haven't been able to find much information about about the cyclotron/ Sync Generator spacer as far as measurements
Anyone know of any changes to the dimensions of these parts that have been uncovered since Stefan made his plans? I have already added the 14th plate to the Sync spacer.
Back in October I made this 3d printed pack for Halloween;
https://i.imgur.com/hPEQ3Ek.jpg
It was based off of Stefan's plans (downloaded from Thingaverse, not self made). My goal, like a lot of people, was to try getting as close to screen accurate as possible. However after I had time to really dig into the dimensions of the pack, I realized how much the Stefan plans were from the actual props. I have gotten some good information on most of the parts of the pack from looking at reference pictures and threads such as this one:
viewtopic.php?f=2&t=34913&hilit=UPDATIN ... &start=300
and this one:
viewtopic.php?f=2&t=36998&p=4892882&hil ... n#p4892882
I am currently building my own set of STLs based on Stefan's plans and modified from online references. Specifically the pack in the Sony lobby and the measurements they took of said pack. This thread: viewtopic.php?f=2&t=34913&hilit=UPDATIN ... &start=300
This thread: viewtopic.php?f=2&t=36998&p=4892882&hil ... n#p4892882
and the Murray pack images in this thread: viewtopic.php?f=2&t=39517&p=4899193&hil ... o#p4899193
My current updated design looks like this (it currently has the double HGA from the comic book)
Though I haven't been able to find much information about about the cyclotron/ Sync Generator spacer as far as measurements
Anyone know of any changes to the dimensions of these parts that have been uncovered since Stefan made his plans? I have already added the 14th plate to the Sync spacer.