- July 20th, 2018, 4:18 pm#4906983Weeeeellll
I've never handled a Karniverous pack, but I'm gonna make some assumptions based on what I do know!
So the pack as you know, is a Motherboard and Shell. The Shell is attached with a set of four socket cap screws. One should be below the Ion Arm, one below the Injection block on the side of the Cyclotron, one directly to the left of the hose port, and the last one is under the V-hook on the gun mount block.
If you carefully remove those four screws, then lift the shell upwards it should come free. I'm gonna repeat myself here, be sure to lift the shell UP, if you don't know how the motherboard is laid out yet and lift at an angle you could end up damaging light mountings.
My first Proton Pack Build:http://www.gbfans.com/forum/viewtopic.php?f=2&t=42310Co-Founder, Northern California Ghostbusters https://www.norcalghostbusters.com/The Pope of Disruptor Pylons