- February 6th, 2016, 4:04 pm#4853657
Well my pack went well, so I figured I'd give the trap a shot. This costs $0 dollars so far to make so it was more of a test run to see how it came out. So this be the prototype. First off yes, obviously has radioshack knobs and odd knobs laying around and paint and sanding isn't perfect but its all screwed together so I will dissemble it and make it prettier shortly. Its still a ways from completed but, it looks like a trap thus far. I erred on some of the measurements since I put it together wrong and its a half inch not wide enough. So yes, its FUGLY, but functional. I'm gonna put magnets to keep the cartridge in place so it will stay put. Two good sized rare earth magnets have plenty of holding power since I won't be putting in a spring / latch assembly.
20160205_181407 by Tom Cahoone, on Flickr
20160205_181410 by Tom Cahoone, on Flickr
20160205_181426 by Tom Cahoone, on Flickr
20160205_181436 by Tom Cahoone, on Flickr
20160205_181448 by Tom Cahoone, on Flickr
20160205_181456 by Tom Cahoone, on Flickr
20160205_181507 by Tom Cahoone, on Flickr
20160205_181532 by Tom Cahoone, on Flickr
20160205_181407 by Tom Cahoone, on Flickr
20160205_181410 by Tom Cahoone, on Flickr
20160205_181426 by Tom Cahoone, on Flickr
20160205_181436 by Tom Cahoone, on Flickr
20160205_181448 by Tom Cahoone, on Flickr
20160205_181456 by Tom Cahoone, on Flickr
20160205_181507 by Tom Cahoone, on Flickr
20160205_181532 by Tom Cahoone, on Flickr
jackdoud, Mathew_impact1 liked this