AJ Quick wrote:Kind of. Just not a button. A button would be easy though. We could do buttons if need be.I wish I had a paint program on my phone; another idea could be to add a lower case "e" in front of the glasses, a lower case "n" on the other side, and add a tail to the left lens, making it read "egon".
Here is an outline I did of the glasses. I would love if someone could clean them up:
- February 27th, 2014, 5:52 am#4781772
- February 27th, 2014, 1:30 pm#4781822
I made this last night. It's a little ad hoc, but it's what I'll be wearing, in addition to any pins you guys come up with.
Ecto-1 fan liked this
- February 27th, 2014, 2:19 pm#4781830
This post may contain an affiliate link that helps support GBFans.com when you make a purchase at no additional cost to you.
I like that patch Lunoki.
For glasses pins, haven't seen much that captures the right essence, but I did see a couple.
Brass, but perhaps a little too ornamental:
http://www.ebay.com/itm/280962606890?_t ... EBIDX%3AIT
Black, but more expensive and maybe too small:
http://www.ebay.com/itm/360781584937?_t ... EBIDX%3AIT
I like that patch Lunoki.
For glasses pins, haven't seen much that captures the right essence, but I did see a couple.
Brass, but perhaps a little too ornamental:
http://www.ebay.com/itm/280962606890?_t ... EBIDX%3AIT
Black, but more expensive and maybe too small:
http://www.ebay.com/itm/360781584937?_t ... EBIDX%3AIT
- February 27th, 2014, 3:24 pm#4781851
Realistically, how feasible would it be to have a glasses lapel pin custom made? If people chipped into a pot or something, to get the first batch (usually orders are a minimum of 100 pieces or so), and anything after that?
- February 27th, 2014, 3:40 pm#4781859
If we go the lapel pin route, they will actually look a lot better than those ones that are out there (the eBay links Ecto-1 fan posted).
Lunoki wrote:Realistically, how feasible would it be to have a glasses lapel pin custom made? If people chipped into a pot or something, to get the first batch (usually orders are a minimum of 100 pieces or so), and anything after that?Its not really a problem at all.
If we go the lapel pin route, they will actually look a lot better than those ones that are out there (the eBay links Ecto-1 fan posted).
For the fastest way to get in contact, please email me: webmaster@gbfans.com
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
- February 27th, 2014, 3:53 pm#4781863
If there is legitimate interest and ppl are on the same page I have no problem chipping in to get it rolling if it comes to that. Without a finalized design to get a quote its impossible to say how much and all that obviously. But I'm game. I like the idea of a little metal glasses pin. It looks more "pro" but will obviously cost considerably more that the button pin. Button pins would be cheap as hell and way easier to customize. The image could be alot more detailed. Only downfall to the button pin it it won't look as "pro" as a metal pin. A guy could get the ball rolling faster with the button pin as well. We could get them pumped out alot faster than a custom metal pin. Could always pump them out quick for con season as im sure other ppl would wear one aside from just us busters. Could always do a "limited" run of the cool metal ones for the more hardcore busters that want to adopt it as a part of their uniform long term instead of just raising awareness in light of the recent loss.
I'd prefer the cool metal one though personally.
I'd prefer the cool metal one though personally.
- February 27th, 2014, 4:01 pm#4781867
http://panacheous.com/new/index.php?pag ... 1&Itemid=6
Here's another one I found. A little closer to egon's...
Here's another one I found. A little closer to egon's...
- February 27th, 2014, 4:09 pm#4781873
Button pins would be cheap as heckie, but they look cheap too.
Mitleid wrote:http://panacheous.com/new/index.php?pag ... 1&Itemid=6Those are great! It would be cool if they came in a silver colour, but they'd be easy enough to paint.
Here's another one I found. A little closer to egon's...
- February 27th, 2014, 4:13 pm#4781875
I really like this design. I'd prefer it as a pin rather than a patch, but it's cool either way.
Dr. Stantz Jr. wrote:I came up with this patch design at work today. Quick mock-up in ms paint:
I really like this design. I'd prefer it as a pin rather than a patch, but it's cool either way.
That's what she said.
- February 27th, 2014, 6:33 pm#4781926
Feel free to use the image if you were looking to have some made up. I'd recommend http://www.qualitylapelpins.com as they have no minimum order and don't charge for setup fees, etc.
Michael Scott wrote:Thanks Man.Dr. Stantz Jr. wrote:I came up with this patch design at work today. Quick mock-up in ms paint:
I really like this design. I'd prefer it as a pin rather than a patch, but it's cool either way.
Feel free to use the image if you were looking to have some made up. I'd recommend http://www.qualitylapelpins.com as they have no minimum order and don't charge for setup fees, etc.
- February 27th, 2014, 7:21 pm#4781936
So... I emailed that qualitylapelpins regarding the metal Egon glasses idea to see what they are capable of producing. Sent a Photo of the glasses found at Harry Caray's. So hopefully they get back to me on cost and a potential idea. I apology if I took a step that shouldn't be taken but i just wanted to get the ball rolling.
- February 27th, 2014, 11:08 pm#4781963
Please let me take care of that portion. I have worked with that company on numerous projects, and they're actually local to me.
I basically just have to send them the outline of the glasses, and they will handle the rest... but I would like some more feedback on how the design should look. I want a solid lapel pin vs just the frames of the glasses.
I basically just have to send them the outline of the glasses, and they will handle the rest... but I would like some more feedback on how the design should look. I want a solid lapel pin vs just the frames of the glasses.
Tyrael liked this
For the fastest way to get in contact, please email me: webmaster@gbfans.com
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
- February 27th, 2014, 11:44 pm#4781964
AJ Quick wrote:I want a solid lapel pin vs just the frames of the glasses.With the frames kinda embossed from the "lenses," or with an outline?
- February 28th, 2014, 12:24 am#4781966
One of the members of the Georgia franchise is doing a run of these They are being sold at cost but its a limited run and will probably just cover the franchise members...I only share it here to share the design.
- February 28th, 2014, 6:27 am#4781998
For sure AJ. That works well if they are local to you. I'm messaged them mostly to hear what design possibilities are there from a company that knows their capabilities. If i get some time on photoshop in the next day or two i'll try to come up with a design of sorts. Unless anyone here beats me to it of course
AJ Quick wrote:Please let me take care of that portion. I have worked with that company on numerous projects, and they're actually local to me.
I basically just have to send them the outline of the glasses, and they will handle the rest... but I would like some more feedback on how the design should look. I want a solid lapel pin vs just the frames of the glasses.
For sure AJ. That works well if they are local to you. I'm messaged them mostly to hear what design possibilities are there from a company that knows their capabilities. If i get some time on photoshop in the next day or two i'll try to come up with a design of sorts. Unless anyone here beats me to it of course
- February 28th, 2014, 12:28 pm#4782046
I'd still like to look into the lapels, the buttons are very cheap and easy though too.
Michael Scott wrote:I like the glasses look. I'd vote for black frames on white background, reminds me of the Harry Caray patch the Cubs wore when he passed.Here is a white button design.
I'd still like to look into the lapels, the buttons are very cheap and easy though too.
Cory GB Maine liked this
For the fastest way to get in contact, please email me: webmaster@gbfans.com
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
- February 28th, 2014, 12:35 pm#4782049
Agreed.
Lunoki wrote:I'd just like to suggest that when people are mocking up ideas, it would be a good idea to shrink your image down to about 100 pixels to make sure the design still looks good and readable in small scale.
Agreed.
Ghostbusters North
With love, all of our appearances benefit the Ronald McDonald House of the Upper Midwest
With love, all of our appearances benefit the Ronald McDonald House of the Upper Midwest
- February 28th, 2014, 3:25 pm#4782077
http://fc03.deviantart.net/fs71/f/2014/ ... 78d4uf.jpg
Kinda lame.. but another take on the silhouette idea that i was playing with. I think i'm still more excited for the metal lapel of just the glasses though.
Kinda lame.. but another take on the silhouette idea that i was playing with. I think i'm still more excited for the metal lapel of just the glasses though.
- February 28th, 2014, 3:29 pm#4782079
Dr. Stantz Jr. wrote:Still good & readable at 100 pixels:I really.love this design
Tyrael liked this
https://www.facebook.com/pages/Chris-No ... e=bookmark
^
Like my cosplay page!
Me: Sir why did you call 911?
Frequently known bum: I didnt just let me bleed!
Me: Your not even bleeding, your drunk and pissed yourself
Frequently known bum: Oh sh*t your right, you need to just let me bleed!
Me: ::rolls eyes:: ok what hospital today?
^
Like my cosplay page!
Me: Sir why did you call 911?
Frequently known bum: I didnt just let me bleed!
Me: Your not even bleeding, your drunk and pissed yourself
Frequently known bum: Oh sh*t your right, you need to just let me bleed!
Me: ::rolls eyes:: ok what hospital today?
- February 28th, 2014, 4:07 pm#4782091
I really like it too.. However, I used it in a different way. Thanks for the image Stantz jr.!... I put it on my pack and i think its subtle enough it won't screw up the overall appearance where i put it. Also, if the tragic passing of anymore of our beloved ghostbusters happens in the future, I intend to use the same memorial design. I'll stick any memorials in the future just below the Ramis memorial.
http://fc07.deviantart.net/fs71/f/2014/ ... 78dazr.jpg
http://fc07.deviantart.net/fs71/f/2014/ ... 78dazr.jpg
- February 28th, 2014, 4:19 pm#4782092
Id love to get one of those for my pack as well
https://www.facebook.com/pages/Chris-No ... e=bookmark
^
Like my cosplay page!
Me: Sir why did you call 911?
Frequently known bum: I didnt just let me bleed!
Me: Your not even bleeding, your drunk and pissed yourself
Frequently known bum: Oh sh*t your right, you need to just let me bleed!
Me: ::rolls eyes:: ok what hospital today?
^
Like my cosplay page!
Me: Sir why did you call 911?
Frequently known bum: I didnt just let me bleed!
Me: Your not even bleeding, your drunk and pissed yourself
Frequently known bum: Oh sh*t your right, you need to just let me bleed!
Me: ::rolls eyes:: ok what hospital today?
- February 28th, 2014, 4:42 pm#4782099
I just printed it on sticker paper. Scaled it to 1 1/2" wide. You can spray clear coat over it or do the old packing tape trick!
- February 28th, 2014, 7:02 pm#4782131
Letmebleed75 wrote:Id love to get one of those for my pack as wellDitto.
~Jay
GB1 and GB 2 Uniform Build Thread: http://www.gbfans.com/community/viewtop ... =4&t=34828
GB1 Proton Pack Build Thread: http://www.gbfans.com/community/viewtop ... =2&t=34784Actual physical updates!
GB1 and GB 2 Uniform Build Thread: http://www.gbfans.com/community/viewtop ... =4&t=34828
GB1 Proton Pack Build Thread: http://www.gbfans.com/community/viewtop ... =2&t=34784Actual physical updates!
- February 28th, 2014, 9:27 pm#4782169
I would prefer the pins as well since the patches would be a little much.
- March 1st, 2014, 11:42 am#4782232
Dr. Stantz Jr. wrote:I came up with this patch design at work today. Quick mock-up in ms paint:Count me as another supporter of this design if we were to do enamel pins. Whilst the glasses would be fairly recognisable in the community, I think their significance would be lost to people "not in the know".
This looks like a beautiful book, I would love to […]
I just couldn't help myself and had to add texture[…]