Page 1 of 2

DVC's Ghostbusters 2 Belt - New Photos

Posted: January 6th, 2012, 9:15 am
by Demon Vice Commander
I finally got around to finishing my GB1 belt accessories, as well as building a new GB2 belt with an accurate buckle.

Image
The Belt Gizmo w/ holster, fobs, and radio antenna were scratch-built. As for the Motorola holster, I got a set of four holsters on eBay for $15 shipped; the seller clearly didn't realize the value of what they had (I think they were listed as "old radio cases" or something)...

Image
Image
The belt, fobs, and GB2 Gizmo were also scratch-built. I'll probably add some more resistors to the daughterboard, though.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 10:25 am
by DerGrundel
Both belts look great, especially your Belt Gizmos. On your GB2 Belt Gizmo, is the circuit board printed out?

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 11:09 am
by Demon Vice Commander
Thanks! I designed the circuit board in Photoshop and printed it out on 1/16" water-repellent poster board. Feel free to use it for your own GB2 belt.

Image

Full Resolution: http://demon-vice-commander.deviantart. ... 1#/d46d5cd

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 11:23 am
by Ron Daniels
That GB2 belt circuit pattern is nice, my friend.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 12:39 pm
by DerGrundel
Thanks! I'd never even heard of water-repellant posterboard, where do you pick up something like that?

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 1:15 pm
by Demon Vice Commander
DerGrundel wrote:Thanks! I'd never even heard of water-repellant posterboard, where do you pick up something like that?
I have these printed at Sam's Club on their "photo board", which is an "RC semi-gloss photo board". It's relatively easy to cut with an exacto knife and is pretty durable; my GB1 gizmo has taken some abuse, including several cons across the midwest and even a trip to Hook & Ladder 8 in New York. As crazy as it sounds, it's a sturdy belt gizmo made of essentially... paper.

I've used this stuff on several other projects and have occasionally gotten caught in the rain without any damage.

Of course, you can always just print it out as a 4x6 and glue/seal it to a sheet of plastic.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 1:25 pm
by DerGrundel
Oh wow, I didn't realize that was just paper there, that's pretty impressive! I figured you'd glued it to some styrene or something. I will definitely be using your template, it's really top notch. Still haven't decided if I'll go with your RC posterboard or gluing it to styrene like I did with my GB1 belt gizmo

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2012, 2:29 pm
by Demon Vice Commander
DerGrundel wrote:Still haven't decided if I'll go with your RC posterboard or gluing it to styrene like I did with my GB1 belt gizmo
Both methods are really sturdy; my very first GB1 gizmo was a 4x6 matte photo glued to a piece of plastic from a DVD case, and it has yet to start peeling off.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 7th, 2012, 9:10 am
by SuperGeekGirl
Did you punch those grommets through yourself? Or did you actually find that black webbing with the grommets in?

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 7th, 2012, 10:36 am
by Demon Vice Commander
SuperGeekGirl wrote:Did you punch those grommets through yourself? Or did you actually find that black webbing with the grommets in?
I punched the grommets through myself; it only took a few hours to do the entire length of the belt.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 8th, 2012, 6:36 pm
by Lewis Tully
Awesome lookin' stuff! Instead of transferring my belt gizmo from belt to belt, I decided to make a GB 2 belt gizmo, too. Yours looks awesome, man! Hope mine looks nearly that good. The belt looks incredible! Great job!

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 8th, 2012, 9:28 pm
by Demon Vice Commander
Lewis Tully wrote:Awesome lookin' stuff! Instead of transferring my belt gizmo from belt to belt, I decided to make a GB 2 belt gizmo, too. Yours looks awesome, man! Hope mine looks nearly that good. The belt looks incredible! Great job!
Thanks! I know that the GB2 gizmos get a lot of hatred for looking so fake, but they can look pretty decent on a GB2 belt.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 9th, 2012, 12:26 am
by Lewis Tully
I agree. I don't like putting my GB 1 on my GB 2 belt... Just doesn't feel right. I got one of Nick A Tron's kit, so it's actually gonna be more of a hybrid, but it'll definitely be more of a GB 2 belt gizmo. Again I say, Great job!

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: November 24th, 2012, 5:13 pm
by txteva
Sorry to raise an old thread but I love your GB2 gizmo and thank you for the high res pic - I've ordered some on photo paper and planning to mount it on plastic... will be my first attempt at building a prop!

Any chance you could post a pic of your GB2 gizmo out of the holder? Pretty please!

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: November 24th, 2012, 6:30 pm
by Demon Vice Commander
Thank you for the kind words on my GB2 gizmo. Even though it's not as realistic as a Sanyo circuit board, it makes for a fun detail on a GB2 belt configuration. You should definitely post some photos of your build - I'd love to see it.


I hope these photos are useful:

Image
Image
Image
Image

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: November 24th, 2012, 6:42 pm
by txteva
Thank you that's really helpful! :-)

I'm off to the electrical & DIY shops tomorrow to pick up parts - I'll take photos of my build as I do it.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: November 24th, 2012, 7:21 pm
by Demon Vice Commander
Also, for anyone that's interested, I'm working on a template for an accurate GB2 gizmo holster. So far, I've designed a basic template in Photoshop:

Image
The GB2 holsters had a much longer band that bowed out more than the GB1 holsters.

Image
I'll have to make a mock-up first to get the bowing right; it's kind of hard to illustrate in a 2-D, front view drawing. The belt slats are drawn at 3", which isn't accurate, but looks much better than trying to stuff the oversized belts into smaller slats, as seen on the screen-used belts.

Image
Here is the template overlaid with a photo of the Aykroyd belt that toured the country a few years ago (along with a uniform and GB2 stunt pack).

Image
Here I've added the GB2 board template for size comparison. The placement of the rivets for the band is rough at best...

Any thoughts or critique are welcome!

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: January 6th, 2013, 3:20 pm
by txteva
Demon Vice Commander wrote:Thank you for the kind words on my GB2 gizmo. Even though it's not as realistic as a Sanyo circuit board, it makes for a fun detail on a GB2 belt configuration. You should definitely post some photos of your build - I'd love to see it.
Well I'm making a start - if you are interested you can keep up to date on the UKGB forums here. Thanks for your pics - they've been a help so far.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: June 6th, 2013, 7:31 pm
by Demon Vice Commander
I've been meaning to post this for some time now; this is my redesigned GB2 Belt Gizmo template based on one of the stunt versions worn by Dan Aykroyd.

Feel free to download it from my deviantArt page:

Image

Image

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: June 6th, 2013, 9:07 pm
by Matt Campbell
I've got a couple of questions.

1) Is the template on your Deviant Art page 1:1, or do I have to adjust the size before printing?
2) What did you use for the raised part of the gizmo where the nixies sit?

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: June 6th, 2013, 10:13 pm
by Demon Vice Commander
Matt Campbell wrote: 1) Is the template on your Deviant Art page 1:1, or do I have to adjust the size before printing?
The downloadable template is 1:1 as a 4x6 image.
Matt Campbell wrote: 2) What did you use for the raised part of the gizmo where the nixies sit?
For the nixie shelf, I used a combination of 0.5" foam core and the corner of a DVD case. However, it seems that the screen-used boards didn't even have shelves - the tubes pretty much sat right on the surface. Of course, the shelf helps add a little more dimension to what is pretty much a fake-looking facsimile of a circuit board.

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: June 6th, 2013, 10:26 pm
by Matt Campbell
Ok, thanks!

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: June 6th, 2013, 10:35 pm
by AJ Quick
Great work. This thread is awesome!

Re: GB1 & GB2 Belts, Fobs, etc.

Posted: June 8th, 2013, 4:53 pm
by CPU64
Yeah!

And I just finished fobs for my belt. I just couldn't find the correct "key chains" so I used whatever ACE had.

Your stuff looks great!

DVC's Ghostbusters 2 Belt - New Photos

Posted: December 8th, 2014, 6:01 pm
by Demon Vice Commander
Over the past two years, I've gotten a lot of questions about my GB2 belt, so I decided to take a few new photos of it. After several modifications and futzing over the exact configuration, I've finally found a set-up that I feel is both aesthetically pleasing and distributes the weight of all the gear I feel obligated to carry about my person.


I'd love to add a trap holster to the belt someday, but would have to sacrifice a few fobs in order to fit it on the belt. It's not like I have the waist to actually WEAR a trap, though... :roll:
Image


I recently acquired some screen-accurate snap hooks in order to make a GB2-style leather fob. These fobs, similar to those used in GB1 and fitted for a smaller belt, did not fit the black belts terribly well and scrunched them up pretty badly. I decided to make mine a bit longer in order to accommodate the wider belt.
Image


More junk to carry! Monitor 4 & Sound Meter
Image


As for the GB1 belts that my wife and I use, I dyed some new belts grey and built a new set of key fobs (lower belt).
Image

Re: DVC's Ghostbusters 2 Belt - New Photos

Posted: December 13th, 2014, 12:54 pm
by Hasford1978
That is a very nice belt DVC, top quality love the gizmo template, I'm wanting to print mine of but haven't had much luck in finding a printer or somebody who has one?

Re: DVC's Ghostbusters 2 Belt - New Photos

Posted: January 7th, 2015, 6:52 pm
by Demon Vice Commander
I just finished a new belt for a friend of mine.

Image

Re: DVC's Ghostbusters 2 Belt - New Photos

Posted: January 7th, 2015, 10:25 pm
by Letmebleed75
Hey demon, since I met and bought a belt off u ive been in awe with the craftsmanship. Unfortunately due to my own stupidity I broke the buckle. Can u lead me to where I can purchase another one?

Re: DVC's Ghostbusters 2 Belt - New Photos

Posted: January 8th, 2015, 6:45 am
by Demon Vice Commander
Letmebleed75 wrote:Hey demon, since I met and bought a belt off u ive been in awe with the craftsmanship.
Eh? I'm afraid I don't quite follow; I've never sold any of these belts before...

Re: DVC's Ghostbusters 2 Belt - New Photos

Posted: January 8th, 2015, 6:50 am
by Demon Vice Commander
Hasford1978 wrote:That is a very nice belt DVC, top quality love the gizmo template, I'm wanting to print mine of but haven't had much luck in finding a printer or somebody who has one?
Just get it printed at any photo print shop as a 4x6. Afterwards, just glue it to a piece of styrene and hit it with some clear spray sealant.