User avatar
By Letmebleed75
#4823570
Crap ur right.got ur name mixed with another member lol. Just had a baby and wife and I havent slept much ha. Well.do.u have any suggestions on where to.purchase the front buckle?
User avatar
By Demon Vice Commander
#4823677
Well.do.u have any suggestions on where to.purchase the front buckle?
As for the buckle, Strapworks.com has a pretty close match that I used on the most recent belt I made.

http://www.strapworks.com/Side_Release_ ... /srbsa.htm

The buckle on my personal belt that I wear is an exact match to the screen-used ones, but I can't remember the the maker; I picked it up at a surplus store, and there's no marking on the buckle itself. :-|
User avatar
By Letmebleed75
#4823678
I appreciate the heads up! Your belts.look amazing. Going to try and make a gizmo holder like u did. Well done
User avatar
By Letmebleed75
#4824397
He buddy sorry for the continued questions what size front buckle did u use?
User avatar
By Letmebleed75
#4824444
Thanks again for the info guys!!!!!!
User avatar
By Venkman's Swagger
#4826175
Hi DVC,

Absolutely love your GB2 Gizmo, thank you for making the print out available to the community. I'm currently in the process of making 2 GB2 uniforms and wondered what ID and OD the plastic tubing is that you used for the stunt nixies please? Also is it PVC hose that you used for them?
User avatar
By Demon Vice Commander
#4826608
I'm currently in the process of making 2 GB2 uniforms and wondered what ID and OD the plastic tubing is that you used for the stunt nixies please? Also is it PVC hose that you used for them?
Sorry for not answering sooner; I used 0.25" ID / 0.375" OD clear vinyl tubing (available at any hardware store) for the stunt nixies.
User avatar
By Venkman's Swagger
#4826624
I'm currently in the process of making 2 GB2 uniforms and wondered what ID and OD the plastic tubing is that you used for the stunt nixies please? Also is it PVC hose that you used for them?
Sorry for not answering sooner; I used 0.25" ID / 0.375" OD clear vinyl tubing (available at any hardware store) for the stunt nixies.
No problem at all. Thank you for the reply, I really appreciate it
User avatar
By PssdffJay
#4829518
Maybe a dumb question, but what colour nylon webbing are the non black GB2 fobs? Is it a white or a greyish? I can't tell from the photo and when I look to buy some, I can find white but not a light grey. I've found silver, is that it?
User avatar
By Hasford1978
#4829543
Personally I've gone with two white fobs, it's really difficult to know the proper colour on the screen....it's either white or gray
User avatar
By Hasford1978
#4829558
What do you use for actually sticking your template to your actual leather holster? Velcro possibly
User avatar
By Demon Vice Commander
#4829576
Maybe a dumb question, but what colour nylon webbing are the non black GB2 fobs? Is it a white or a greyish? I can't tell from the photo and when I look to buy some, I can find white but not a light grey. I've found silver, is that it?

I used the silver grey that Strapworks offers for my set of fobs:

http://www.strapworks.com/Heavyweight_P ... p/hwp1.htm
User avatar
By Demon Vice Commander
#4829577
What do you use for actually sticking your template to your actual leather holster? Velcro possibly
I just have it wedged in between the two spots where the band connects to the backing; just make sure you make your board a little wide so it will sit snugly inside the holster. The is essentially how the screen-used gizmos for both films were secured. :)
Personally I've gone with two white fobs, it's really difficult to know the proper colour on the screen....it's either white or gray
The fobs were definitely a light grey. The prototype belt that was on the mannequin with the Super Hero pack at Sony had some white fobs, but all of the screen-used ones appear to be grey. The Venkman belt from the Sony Archives still has a grey fob on it to this day.
User avatar
By Hasford1978
#4829604
I printed my template off last week & your right about it fitting snug in the pouch, last time i had all my gear i used velcro on the back but never liked that idea much
User avatar
By Demon Vice Commander
#4874757
I recently made a new set of gizmo and trap holsters for my GB1 and GB2 belts. Although I had been working on my own GB2 gizmo holder template for some time, I opted for Jairus' great template which more or less matched my own measurements. Check out the other useful templates on his website: http://jairuswhitley.com/download.html

For the GB2 trap holster, I cut the aluminum back plate from 1/16" aluminum, and I used one of CPU64's v-hooks.

Image

Image
Glenn Frederick liked this

Hi. Thank you for your excellent tips for the ghos[…]

Now I have to watch them all again. I'm surprised […]

Great! Thank you.

Ever notice?

It is kinda funny yes! I have seen a few people pu[…]