- April 15th, 2017, 10:47 pm#4892634
This post may contain an affiliate link that helps support GBFans.com when you make a purchase at no additional cost to you.
Just thought I would share the belt fobs and build list. My total project cost was about $40 but I built 4 complete sets of 3 fobs and with enough left overs to build couple extras for leg hoses but I already had some.
Final product is below. The 3 versions I built are on the left the right hand side was a cheap ebay deal.
A side angle.
Assembly is pretty easy I followed the template on the site below. Cut my strapping to the proper length, drilled holes where needed, watched a couple you tube videos on how to use the leather snaps/rivets and went to town. A couple hours later I had a bunch (16+) key fobs that only cost about $2.5 a piece and I had leftover snaps to make my faux night vision goggles.
http://jairuswhitley.com/download.html
Build list:
20mm black Leather Straps 3x (3 yards worth) $15
http://www.ebay.com/itm/252165641533?_t ... EBIDX%3AIT
50 piece 15mm 5/8" Silver Button Snaps $9
http://www.ebay.com/itm/301852506174?_t ... EBIDX%3AIT
20 piece 20mm D Rings $2
http://www.ebay.com/itm/262507641869?_t ... EBIDX%3AIT
10 3/4" SPRING SNAP HOOKS $13 (Note I have seen a lot of different snap hooks used and while these are not the cheapest I liked the look and I think they are very close to the screen used versions.)
http://www.ebay.com/itm/122018829929?_t ... EBIDX%3AIT
4x 30mm Split Key Rings or Welded O Rings $2
http://www.ebay.com/itm/332068143227?_t ... EBIDX%3AIT
I used split rings that I already had these but either way they are $1-$2
Mods If I am not allowed to add the ebay links let me know just trying to be helpful.
Just thought I would share the belt fobs and build list. My total project cost was about $40 but I built 4 complete sets of 3 fobs and with enough left overs to build couple extras for leg hoses but I already had some.
Final product is below. The 3 versions I built are on the left the right hand side was a cheap ebay deal.
A side angle.
Assembly is pretty easy I followed the template on the site below. Cut my strapping to the proper length, drilled holes where needed, watched a couple you tube videos on how to use the leather snaps/rivets and went to town. A couple hours later I had a bunch (16+) key fobs that only cost about $2.5 a piece and I had leftover snaps to make my faux night vision goggles.
http://jairuswhitley.com/download.html
Build list:
20mm black Leather Straps 3x (3 yards worth) $15
http://www.ebay.com/itm/252165641533?_t ... EBIDX%3AIT
50 piece 15mm 5/8" Silver Button Snaps $9
http://www.ebay.com/itm/301852506174?_t ... EBIDX%3AIT
20 piece 20mm D Rings $2
http://www.ebay.com/itm/262507641869?_t ... EBIDX%3AIT
10 3/4" SPRING SNAP HOOKS $13 (Note I have seen a lot of different snap hooks used and while these are not the cheapest I liked the look and I think they are very close to the screen used versions.)
http://www.ebay.com/itm/122018829929?_t ... EBIDX%3AIT
4x 30mm Split Key Rings or Welded O Rings $2
http://www.ebay.com/itm/332068143227?_t ... EBIDX%3AIT
I used split rings that I already had these but either way they are $1-$2
Mods If I am not allowed to add the ebay links let me know just trying to be helpful.