lannyjack wrote:The grip you are referring to is the rear .. the front is held on by the method described by Vinn above...Vincenzo330 wrote:Yes, the screw in the ear holds the grip on. There is another in the barrel lock which does the same on the other side.Are there rivets on the grips like on the Sony lobby pack, or is it just held on by the screws in the lock and ear? Its hard to tell from the angles on the pics.
Also, the grips are not wood, the "clear" casting resin that was widely used in the 80's looked almost like amber after curing. Like the gun handle in Blade Runner
- August 3rd, 2012, 4:22 pm#404840
- August 3rd, 2012, 5:33 pm#404863
Oh, duh. Rivets in the way of moving parts and everything. Well, I would rather ask a stupid question and know now instead of fixing it on my gun later lol.
- August 3rd, 2012, 9:41 pm#404918
Question! Hopefully maybe Vinn can answer this...
I'm assuming this gun had, at some point, a functional clear tube mechanism, correct?
Because in the image showing down the barrel, I can see the other end that broke off from the clear tube, its still attached to the 1" slider, and what looks like a blue wire, and the pin for the handle twist at the top left of the tube..
Was it possible to see anything down the barrel that could help with deciphering the mechanism? I know the camera can't AF down there.
I'm assuming this gun had, at some point, a functional clear tube mechanism, correct?
Because in the image showing down the barrel, I can see the other end that broke off from the clear tube, its still attached to the 1" slider, and what looks like a blue wire, and the pin for the handle twist at the top left of the tube..
Was it possible to see anything down the barrel that could help with deciphering the mechanism? I know the camera can't AF down there.
- August 3rd, 2012, 10:14 pm#404926
Is that this pack?
Just a hunch. Broken clear tube and all.
Man that is a terrible mustache
Just a hunch. Broken clear tube and all.
Man that is a terrible mustache
GB Fans Ghost Trap http://www.gbfans.com/fans/props/ghost-traps/5824/
Giga Meter http://www.gbfans.com/fans/props/giga-meters/5823/
Ecto Goggleshttp://www.gbfans.com/fans/props/ecto-goggles/5832/
Giga Meter http://www.gbfans.com/fans/props/giga-meters/5823/
Ecto Goggleshttp://www.gbfans.com/fans/props/ecto-goggles/5832/
- August 3rd, 2012, 10:19 pm#404928
Details seem to match, its quite possible that its the same pack.
- August 4th, 2012, 1:55 am#404953
He said the gun was set up for for the extending acrylic tip. The pin you see is what attached the acrylic tube to the metal sleeve
Ross pushed the sleeve and it moved back with the rest of the acrylic tube and the pin, it returned back to its original position before he pushed it so the mech still worked. Its too hard to say if the mech is powered by a spring as it wasn't a fast return after he pushed it, it was slightly delayed. It could be a spring... or possibly a rubberband somehow...
The metal sleeve covering the acrylic tube is about 1 inch long. The sleeve attached to a white bit of plastic (or something similar) with what looked like a screw at the bottom of the sleeve. The plastic then ran into the depths of the gun and i assumed attached to the interior mech inside. The plastic is what pushed the acrylic tube and sleeve in and out.
The acrylic tube was set in its retracted position.
There was plenty of room behind the metal sleeve for the pin or set screw that held the forward gun assembly in place, but that set screw was hidden from view.
The blue wire you see in the back is the guns strobe for the barrel effect. The blue wire had a blub attached to the end of it....
So now I have one question.... who's going to make a strobe light kit extension? :p
CPU64 wrote:Question! Hopefully maybe Vinn can answer this...Just spoke to Ross about this...
I'm assuming this gun had, at some point, a functional clear tube mechanism, correct?
Because in the image showing down the barrel, I can see the other end that broke off from the clear tube, its still attached to the 1" slider, and what looks like a blue wire, and the pin for the handle twist at the top left of the tube..
Was it possible to see anything down the barrel that could help with deciphering the mechanism? I know the camera can't AF down there.
He said the gun was set up for for the extending acrylic tip. The pin you see is what attached the acrylic tube to the metal sleeve
Ross pushed the sleeve and it moved back with the rest of the acrylic tube and the pin, it returned back to its original position before he pushed it so the mech still worked. Its too hard to say if the mech is powered by a spring as it wasn't a fast return after he pushed it, it was slightly delayed. It could be a spring... or possibly a rubberband somehow...
The metal sleeve covering the acrylic tube is about 1 inch long. The sleeve attached to a white bit of plastic (or something similar) with what looked like a screw at the bottom of the sleeve. The plastic then ran into the depths of the gun and i assumed attached to the interior mech inside. The plastic is what pushed the acrylic tube and sleeve in and out.
The acrylic tube was set in its retracted position.
There was plenty of room behind the metal sleeve for the pin or set screw that held the forward gun assembly in place, but that set screw was hidden from view.
The blue wire you see in the back is the guns strobe for the barrel effect. The blue wire had a blub attached to the end of it....
So now I have one question.... who's going to make a strobe light kit extension? :p
My current dual build thread ====> http://www.gbfans.com/community/viewtop ... =2&t=34777
gb1 Vhook discussion ===> http://www.gbfans.com/community/viewtop ... =2&t=29739
yea old gb1 halfmoon spacer ===> http://www.gbfans.com/community/viewtop ... =2&t=30726
My Old Mark1 Build ===> http://www.gbfans.com/community/viewtop ... =2&t=23581
Cray's gb1spacer thread===> http://www.gbfans.com/community/viewtop ... =2&t=34646
gb1 Vhook discussion ===> http://www.gbfans.com/community/viewtop ... =2&t=29739
yea old gb1 halfmoon spacer ===> http://www.gbfans.com/community/viewtop ... =2&t=30726
My Old Mark1 Build ===> http://www.gbfans.com/community/viewtop ... =2&t=23581
Cray's gb1spacer thread===> http://www.gbfans.com/community/viewtop ... =2&t=34646
- August 4th, 2012, 10:35 am#404985
We've really seen a lot of new info come out in the last year or so, some awesome stuff.
- August 4th, 2012, 7:00 pm#405063
Anyone notice the microchip through the red lens of the cyclotron on the 3rd picture showing the dots on the rings?
Sent from my HTC EVO 3D using Ghostbusters Fans for Android
Sent from my HTC EVO 3D using Ghostbusters Fans for Android
...Somebody blows their nose and you want to keep it?
- August 6th, 2012, 4:09 pm#405402
amazing pictures! did the electronics on this pack still work? anyone at PIH test it??
- August 7th, 2012, 1:29 pm#405632
The reference photos from Ross are now available in the Reference section.
We'll also have some screen shots from that YouTube video available soon:
http://www.gbfans.com/equipment/reference/39/
We'll also have some screen shots from that YouTube video available soon:
http://www.gbfans.com/equipment/reference/39/
For the fastest way to get in contact, please email me: webmaster@gbfans.com
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
- August 7th, 2012, 2:22 pm#405642
And some screen shots from the Profiles in History video:
http://www.gbfans.com/equipment/reference/40/
http://www.gbfans.com/equipment/reference/40/
For the fastest way to get in contact, please email me: webmaster@gbfans.com
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
- August 7th, 2012, 2:46 pm#405646
Cory GB Maine wrote:Is that this pack?Where is that from? I can't place it
Just a hunch. Broken clear tube and all.
Man that is a terrible mustache
- August 7th, 2012, 3:27 pm#405654
Casper
Zeddemore: Hey, wait a minute. Hey, hey, hey, hey, hey! Hold it! Now, are we actually gonna go before a federal judge, and tell him that some moldy Babylonian god is going to drop in on Central Park West, and start tearing up the city?
Spengler: Sumerian, not Babylonian.
Venkman: Yeah. Big difference.
Zeddemore: No offense, guys, but I've gotta get my own lawyer.
www.scientificparanormal.com
Spengler: Sumerian, not Babylonian.
Venkman: Yeah. Big difference.
Zeddemore: No offense, guys, but I've gotta get my own lawyer.
www.scientificparanormal.com
- August 7th, 2012, 4:00 pm#405664
Anyone else notice that this pack has two 701's on it?
Jack Doud
http://www.bloody-plastic.com/costumes.html
My Oddball props:
Statue of Liberty Controller, Slime Scoop, Keymaster Colander Helmet, KUD Meter.
http://www.bloody-plastic.com/costumes.html
My Oddball props:
Statue of Liberty Controller, Slime Scoop, Keymaster Colander Helmet, KUD Meter.
- August 7th, 2012, 4:48 pm#405672
I hate rare parts
jackdoud wrote:Anyone else notice that this pack has two 701's on it?Janderson pointed out to me that he had. the worst part is they are old style 701's to boot :/
I hate rare parts
My current dual build thread ====> http://www.gbfans.com/community/viewtop ... =2&t=34777
gb1 Vhook discussion ===> http://www.gbfans.com/community/viewtop ... =2&t=29739
yea old gb1 halfmoon spacer ===> http://www.gbfans.com/community/viewtop ... =2&t=30726
My Old Mark1 Build ===> http://www.gbfans.com/community/viewtop ... =2&t=23581
Cray's gb1spacer thread===> http://www.gbfans.com/community/viewtop ... =2&t=34646
gb1 Vhook discussion ===> http://www.gbfans.com/community/viewtop ... =2&t=29739
yea old gb1 halfmoon spacer ===> http://www.gbfans.com/community/viewtop ... =2&t=30726
My Old Mark1 Build ===> http://www.gbfans.com/community/viewtop ... =2&t=23581
Cray's gb1spacer thread===> http://www.gbfans.com/community/viewtop ... =2&t=34646
- August 7th, 2012, 8:42 pm#405750
Old style??
What's the difference? Looks like the one I have on mine..
What's the difference? Looks like the one I have on mine..
- August 10th, 2012, 10:05 am#406353
I’m curious if these new pictures have changed anyone’s idea of the best paint or method of paint? Like, BBQ vs. satin, hammered vs. textured places that should or shouldn’t be textured, etc.
- August 10th, 2012, 11:27 am#406363
Just my opinion, maybe some on who has seen other packs can chime in as well.
XenuPrime wrote:I’m curious if these new pictures have changed anyone’s idea of the best paint or method of paint? Like, BBQ vs. satin, hammered vs. textured places that should or shouldn’t be textured, etc.I didn't get to see THIS pack in person but I have seen the 2 on display at Sony. I still believe the textured, satin is the best finish. The packs really look like they are made of cast iron like and old stove. So whatever you feel is the beat texture to match that look.
Just my opinion, maybe some on who has seen other packs can chime in as well.
Come check out what I am building!:https://www.instagram.com/JoeLuna33
Bob's Prop Shop Rebuild:http://www.gbfans.com/community/viewtop ... =2&t=36984
RGB/Movie Hybrid Pack Builds:http://www.gbfans.com/community/viewtop ... =2&t=36938
GB Reboot Pack Pics from SDCC 2015: http://www.gbfans.com/community/viewtop ... =2&t=39739
Bob's Prop Shop Rebuild:http://www.gbfans.com/community/viewtop ... =2&t=36984
RGB/Movie Hybrid Pack Builds:http://www.gbfans.com/community/viewtop ... =2&t=36938
GB Reboot Pack Pics from SDCC 2015: http://www.gbfans.com/community/viewtop ... =2&t=39739
- August 10th, 2012, 6:53 pm#406422
Any new info on screw sizes? Anything different that we know now?
- August 16th, 2012, 2:01 pm#407338
I cannot believe we're just now noticing the knurling on both ion arm cap rods. Very interesting.
And, the threads on the cyclotron ring "dots" really makes me wonder what their original purpose was.
And, the threads on the cyclotron ring "dots" really makes me wonder what their original purpose was.
- August 16th, 2012, 2:12 pm#407343
holymattbone wrote:Seriously, this hobby is so frustrating sometimes...Vincenzo330 wrote:I think that are different dimension of the alluminium tubes. your photo tell that are little big (clearly 1"1/4).
One thing you might notice is the size of the beam line/filler tubes. It's something that Ross and I had been arguing about for months and... He was right They ARE 1-1/8" OD. I guess I need to make some revisions now :/
so i think on the hero minnesota, semihero and super hero thery are 1"1/4) and on profile in history pack are just little than others. Probably they hd finished the tubes.
http://www.gbfans.com/image.php?url=/im ... 33/365.jpg
- August 17th, 2012, 7:32 am#407532
Aaron Norton wrote:I cannot believe we're just now noticing the knurling on both ion arm cap rodsIt seems like only the top rod has the knurling - the bottom rod doesn't appear to have it.
- August 17th, 2012, 3:14 pm#407629
I always thought the PPD was flush with the shell at the bottom, but it looks like it isn't?
Edit: nevermind, I think it's just the angle of the pic.
Edit: nevermind, I think it's just the angle of the pic.
- August 21st, 2012, 4:17 pm#408269
CLICK THE ABOVE BANNER TO BUY HIGH QUALITY PROP PARTS!
FEEDBACK.....http://www.gbfans.com/community/viewtop ... =32&t=5689
Sloted screws for the larger disc on the side discs.
CLICK THE ABOVE BANNER TO BUY HIGH QUALITY PROP PARTS!
FEEDBACK.....http://www.gbfans.com/community/viewtop ... =32&t=5689
- September 4th, 2012, 9:44 pm#410639
So is there ny leads on the purchaser of this pack, or has it disappeared into a private collection?
Stoke me a clipper...I'll be back for Christmas.....
- November 13th, 2012, 10:28 am#423288
The pack Spengler is using in the courtroom looks a little different. The white hat light in that scene looks sunken in like the others. This one is completely hanging out. Anyone have any info? I'm planning my build on this pack.
- November 24th, 2012, 9:46 pm#425041
Wallabe wrote:It's not the same pack as this one. There's only one or two hero packs in that scene, and if you watch the straps and alice padding, you can actually see the actors swap packs from shot to shot in that scene.Egon and Venkman are using the Archive/Minnesota Pack in the power up sequence.
- May 26th, 2013, 4:04 pm#446872
If u google the profiles in history auction, they give a detailed 6min video of the actual pack itself, and explains that they retro fitted the unit with new Alice frame etc for the filming of GB2.
ProtonCharger wrote:I bet the clear tubing went inside the split tubing from pack to thrower.Apparently the clear tubing was from when it was able to be connected to the uniform. I think Profiles in History lost the original tubing.
If u google the profiles in history auction, they give a detailed 6min video of the actual pack itself, and explains that they retro fitted the unit with new Alice frame etc for the filming of GB2.
You can see our Paranormal Boots in action here: […]
I was one of those kids who was scared of his own […]
The opening post contain a lot information. Quick […]