Have you accumulated a huge Ghostbusters Collection? Talk about what you have and show it off!
User avatar
By CaptCyan
Supporting Member
#247141
Actually it's 2 piles. There's the good pile that's on display.

Image

Image

And then there is the potentially good plie that resides in the basement. These are the ones that appear in most of my threads.

Image

Image

Image
User avatar
By SicDigital
#247648
pics of tons of awesome stuff
Dude I just found my old RGB toys that were boxed up at my dad's house, but they are gross (my dad smoked in the house so discolored etc plus I actually played with 'em) so from your experience what kind of paint is the best for repainting the Kenner Firehouse, Ecto 1 and RGB figures?
User avatar
By CaptCyan
Supporting Member
#247681
Dude I just found my old RGB toys that were boxed up at my dad's house, but they are gross (my dad smoked in the house so discolored etc plus I actually played with 'em) so from your experience what kind of paint is the best for repainting the Kenner Firehouse, Ecto 1 and RGB figures?
For Kenner Firehouse, look here: http://www.gbfans.com/community/viewtop ... =7&t=18989

For Ecto 1, look here: http://www.gbfans.com/community/viewtop ... 13&t=19007

For RGB Figure Restoration, look here: http://www.gbfans.com/community/viewtop ... 90&t=20574

For RGB Figure Repaints, look here: http://www.gbfans.com/community/viewtop ... 90&t=20379

All other inquiries or comments please leave on this thread. Or you can always shoot me a PM. :wink:

Thanks, Guys!
User avatar
By SicDigital
#248016
Dude I just found my old RGB toys that were boxed up at my dad's house, but they are gross (my dad smoked in the house so discolored etc plus I actually played with 'em) so from your experience what kind of paint is the best for repainting the Kenner Firehouse, Ecto 1 and RGB figures?
For Kenner Firehouse, look here: http://www.gbfans.com/community/viewtop ... =7&t=18989

For Ecto 1, look here: http://www.gbfans.com/community/viewtop ... 13&t=19007

For RGB Figure Restoration, look here: http://www.gbfans.com/community/viewtop ... 90&t=20574

For RGB Figure Repaints, look here: http://www.gbfans.com/community/viewtop ... 90&t=20379

All other inquiries or comments please leave on this thread. Or you can always shoot me a PM. :wink:

Thanks, Guys!
My Kenner RGB Ecto is terrible (I played in the bathtub with it as a kid) I'm thinking of painting it up like when Ray first bought it, "You can't park that here!" and repainting the Firehouse similar to yours but with the basic GB white banner above the door from the same scene as the old Ecto.

Thanks for the links.
User avatar
By CaptCyan
Supporting Member
#248401
Capt, I have that same S-Mart Ash figure on my shelf!
And that's only the tip of that "iceberg". You should see the whole deal. :wink:
User avatar
By joeghostbuster
#248695
put some pics up! I plan on taking some updated pics of my entire collection (once I buy myself a new camera for my birthday) and uploading them before I start selling some of my stuff, which will probably include my Palisades Army of Darkness figures collection ( since we're on the topic of Evil Dead / AOD )
User avatar
By CaptCyan
Supporting Member
#248742
I did some customs of the Palisades figs. They're boxed up along with a castle I never got around to repainting. I'll have to dig them up. Here's a pic of the rest of the top shelf.

Image
User avatar
By CaptCyan
Supporting Member
#249075
Dug out the Castle. Surpirsed to see the figures still standing on top. I plan to give it the whole "stone" look someday.

Image

Customised "Armored" Ash fighting 'ol Evil Ash.

Image

Hero Ash on his trusty steed, "Hamburger".

Image

Deadite Captain on his "Death Horse".

Image

Same thing only different.

Image

'Mr. Fancypants" knocking heads

Image

That's it for the Palisades figures.
User avatar
By CaptCyan
Supporting Member
#249644
I didn't mention the life size Deadites that hang out on the front lawn, did I?

Image

Image

Image

Image

They only come out for Halloween.
User avatar
By CaptCyan
Supporting Member
#249900
that is awesome Capt, we do the same kind of stuff at my folks house every year. though I find it very difficult to pose those plastic skeletons
It's not that hard. All you need is some clothesline, a pop rivet gun and a few metal rods to shove up their butts. That'l keep 'em in line. :wink:
User avatar
By CaptCyan
Supporting Member
#252947
I dug this up out of whats left of my Hotwheels collection. I had frogotten it was even there.


Image

Image

Here it is next to a regular Kenner Ecto-1 to get a sense of scale.

Image


By GhstbstrLMLIII
#252985
Capt, I would love to see you take on that Ecto-1A. I've got one that's about in the same condition as your's is, but I'll bet you could make it look absolutely sick.
User avatar
By CaptCyan
Supporting Member
#253062
Is that the one that came with Fuji Film?
That sombitch on eBay kept the film! :lol:
Capt, I would love to see you take on that Ecto-1A. I've got one that's about in the same condition as your's is, but I'll bet you could make it look absolutely sick.

Prolly could, but not right away. Maybe a project for a snowy day.
User avatar
By CaptCyan
Supporting Member
#254006
I got 2 new (to me) items off eBay. First is EGB Sam Hain who is a slight dissapointment. His body seems kinda short and his cape falls apart if you pick him up. He's a good candidate for a makeover.
Image

I know he's an ancient, but his dentures don't fit right. :lol: And what's up with the girly eye lashes?Still, the head sculpt is pretty cool.

Image

Next is a Slimer candy pack, complete with moldy candy.

Image

For a blow mold type of container, the sculpt is pretty awsome and should paint up even better.

Image

Are there any other small Slimers out there that I don't have in my collection?
By GhstbstrLMLIII
#254049
Capt - I've been watching those Sam Hain figure auctions and missed one because I forgot what time it ended. Glad to see it land in good hands though!
User avatar
By CaptCyan
Supporting Member
#257778
excellent repaint! I'd ask you why you havent done it to your 2 ecto hotwheels, but I know you've got quite a bit on your plate right now :D
Actually, Slimer was an easy repaint. The tiny Ectos will involve a lot of Blue Tape and I have to make the mini back door and licence plate decals. That's a winter project.
Tyger Cheex

If you need the key fobs for your costume then he […]

How did I miss that?!?

After years, and years, and years watching these […]

Hm. Y'know, just for the sake of discussion. In […]

As far as wants go, I really want them to strike t[…]