This is for other Ghostbusters Props that don't fit into the categories above.
By RedVirtue
#274966
Here's my GB2 stethoscope and some of the steps I took creating it.

If you want to make one yourself, you'll need a black stethoscope, a vintage wire-frame headset, and something cone shaped.

Image
Gently pull the drum off of the hose attached to the stethoscope.

Image
Then chop that stem off! (But save the stem. you'll need it later)

Image
For the cone shape I started out with a regular funnel but I wasn't getting the desired shape. But I found this funnel that worked really well. You can find it at a Michael's craft store in the baking department.

Image
Chop down that cone too! Before chopping the cone, you can place the drum into it and trace inside to have a decent indication of where you want to cut. Feel free to put it into boiling hat water if you'd like to soften it a little.

Image
You want them to fit together like this once you've shaved the cone down.

Image
You may want to bevel the stem before going to the next step. So when you use epoxy it will not slide out.

Image
Paint the cone and the drum then epoxy the stem into the top.

Image
find yourself a ring to place at the base of the stem. I found this in my box of parts.

Image
Paint the ring black if it isn't already.

Image

Image
Rooney the Waster liked this
By featofstrength
#4910082
Looking to build one of these myself, I stumbled upon this at Hobby Lobby:
Image
Image

Seems to be a good size with minimal to no adjustments...and you get 6 plastic cones in case you screw something up or want to make more!

    I'd really like to see the new t-shirt unlocks t[…]

    Hey and welcome

    My Little Pony/Ghostbusters crossover done by my d[…]

    Great work identifying the RS Temperature Control […]