- July 12th, 2012, 11:32 am#400171
This has been a long time in the making. Last year when we met the Tampa and Orlando guys I was inspired to begin my pack build. I spent the next 4 months tracking down each individual component and made a list. Once I got my Bonus and Tax return, I started placing orders.
After 9 Months of research, ordering, and waiting, I am now at a point where I can get started. The last main component I am missing is the thrower, I ordered one from CPU64 about 3 months ago so it should be close to being finished.
I would also like to say thank you to ALL of the seller's listed below, you have been awesome to deal with and I appreciate the time spent answering all of my questions. You will be the ones I point to when someone wants to build a pack. A big thank you goes to AJ for providing a easy place to get some of the specialty parts, but my bank account hates you.
I am debating on placing up my excel tracking sheet which has listed all of the parts, sellers, prices, and shipping costs to give someone new an idea of what it costs to build one from the ground up. Had I have known how much I was truly going to spend sourcing everything, I might have just bought a "starter" pack for half the cost and gone from there.
Let's just say I am now north of $2000, not including CPU64's thrower, paint, primer, filler, etc...
Parts list to date:
Real Parts:
- LC-1 Alice Pack frame and straps with correct NSN's
- Clippard R331
- Clippard R701
- Clippard brass elbows and barbs
- Dale PH-25 resistor
- Dale RH50 resistor
- Crank knob
- Sage resistor
- Arcolectric clear and red indicators
- Orange and White Hatlights
Replica Parts
- Legris straits
- Legris banjos
- SMC elbows
Vincenzo330's:
- Motherboard
- bigi330 shell
- aluminum HGA
- aluminum booster tube with plug
- aluminum n-filter
- aluminum vac line
- aluminum beam line and filler tube
- aluminum cable clamps
- aluminum injector tubes
- aluminum ppd
CPU64's:
- aluminum ion arm
- aluminum thrower set (on order)
Anhcon's:
- aluminum ion arm assembly
- aluminum v-hook
- acrylic tube w/trigger tip
- aluminum gun track
- splitless loom locking ring
jpa35's:
- aluminum shock mount (to hold me over until AJ's real bellows are done)
Nickatron's:
- booster frame
- bumper
Multimedia Mahem's:
- thrower grips
- full tubing set
GBFans':
- aluminum side knob set
- bellow replica (on waiting list)
GhostGuy's:
- Mighty Microcontroller for lights and sounds
Crix's:
- power cell and cyclotron lens set
JoeLuna33's:
- aluminum label set
gEkX's:
- hardware set
And of course the pictures, there are some missing, but this is what I have on my HD at this time. I will transfer the rest later:
After 9 Months of research, ordering, and waiting, I am now at a point where I can get started. The last main component I am missing is the thrower, I ordered one from CPU64 about 3 months ago so it should be close to being finished.
I would also like to say thank you to ALL of the seller's listed below, you have been awesome to deal with and I appreciate the time spent answering all of my questions. You will be the ones I point to when someone wants to build a pack. A big thank you goes to AJ for providing a easy place to get some of the specialty parts, but my bank account hates you.
I am debating on placing up my excel tracking sheet which has listed all of the parts, sellers, prices, and shipping costs to give someone new an idea of what it costs to build one from the ground up. Had I have known how much I was truly going to spend sourcing everything, I might have just bought a "starter" pack for half the cost and gone from there.
Let's just say I am now north of $2000, not including CPU64's thrower, paint, primer, filler, etc...
Parts list to date:
Real Parts:
- LC-1 Alice Pack frame and straps with correct NSN's
- Clippard R331
- Clippard R701
- Clippard brass elbows and barbs
- Dale PH-25 resistor
- Dale RH50 resistor
- Crank knob
- Sage resistor
- Arcolectric clear and red indicators
- Orange and White Hatlights
Replica Parts
- Legris straits
- Legris banjos
- SMC elbows
Vincenzo330's:
- Motherboard
- bigi330 shell
- aluminum HGA
- aluminum booster tube with plug
- aluminum n-filter
- aluminum vac line
- aluminum beam line and filler tube
- aluminum cable clamps
- aluminum injector tubes
- aluminum ppd
CPU64's:
- aluminum ion arm
- aluminum thrower set (on order)
Anhcon's:
- aluminum ion arm assembly
- aluminum v-hook
- acrylic tube w/trigger tip
- aluminum gun track
- splitless loom locking ring
jpa35's:
- aluminum shock mount (to hold me over until AJ's real bellows are done)
Nickatron's:
- booster frame
- bumper
Multimedia Mahem's:
- thrower grips
- full tubing set
GBFans':
- aluminum side knob set
- bellow replica (on waiting list)
GhostGuy's:
- Mighty Microcontroller for lights and sounds
Crix's:
- power cell and cyclotron lens set
JoeLuna33's:
- aluminum label set
gEkX's:
- hardware set
And of course the pictures, there are some missing, but this is what I have on my HD at this time. I will transfer the rest later:
Miranda liked this
Animatronic Baby Terror Dog - http://www.gbfans.com/community/viewtop ... =7&t=34974
Universal Studios Extreme Pack Restoration/Mod - http://www.gbfans.com/community/viewtop ... =2&t=34735
RGB MDF Pack Build - http://www.gbfans.com/community/viewtop ... =2&t=30017
ECTO 1ATV Power Wheel Build - http://www.gbfans.com/community/viewtop ... 13&t=29800
GB1 Pack Build With Venting - http://www.gbfans.com/community/viewtop ... =2&t=30551
Universal Studios Extreme Pack Restoration/Mod - http://www.gbfans.com/community/viewtop ... =2&t=34735
RGB MDF Pack Build - http://www.gbfans.com/community/viewtop ... =2&t=30017
ECTO 1ATV Power Wheel Build - http://www.gbfans.com/community/viewtop ... 13&t=29800
GB1 Pack Build With Venting - http://www.gbfans.com/community/viewtop ... =2&t=30551