User avatar
By Heatley2001
#4899511
I'm trying to install a toggle switch in my spirit pack but I'm having issues with it. I can switch it to the on position and it will turn on but when I switch it to the off position it says on. The only way is if I switch it back to the on position.

So it goes On - On Off - still on back to On finally goes off.

Any help would be great. I may be missing something.

Thank you.
By necrosapien87
#4899513
Did you accidentally pick up a 3 position switch? 3 position has on-off-on. I could see if you pushed down too hard to turn it off accidentally hitting on again then pushing it back up to center for off.
User avatar
By Heatley2001
#4899544
sadly im at work at the moment so i would be able to send a picture till i get home this afternoon.

what i did is was take the 2 wires coming from the switch and used some electrical tape and taped them directly to the red and black wires. One wire to the black and the other to the red.
User avatar
By Heatley2001
#4899781
Kingpin wrote:Can you post a photo of the setup? That might help give a better idea of what could be causing the issue.

Hi Kingpin.

Im not sure if i sent you this picture or not and when the posts got merged together i forgot to come back and check for replies.

Here is the set up for the toggle switch issue i was having.

Image20171013_123042 by Kevin Culver, on Flickr

    Two specific ideas I have are basically holiday sp[…]

    While waiting impatiently for Frozen Empire to rel[…]

    Make it that pack, sell it for $599. (While I […]

    Good morning everyone! I have a local toy collect[…]