Movies |

Home > Shop

Shop

Get a Discount in July between 5-25% Off! Purchase a Supporting Membership to Save!

Here at the Ghostbusters Fans we are dedicated to providing you with genuine parts for your Ghostbusters Props. We keep our items in stock and have them ready to ship after you place your order. We accept PayPal (Visa, Mastercard, Discover, E-Check, and Bank Transfers) only! Please note, there are limited quantities available of each part. Even though we may have several instock, you may only be able to purchase a select amount.

Ghostbusters Fans Business Cards

Get a stack of Ghostbusters Fans Business Cards to hand out while in costume. They are double sided!

$0.00

In Stock: 4

Quantity:

Proton Pack / Ghost Trap: Alkon AQ-68 Straight Fitting (5/32" OD)

These are Alkon AQ-68 straight fittings for use on the Proton Pack, and Ghost Trap pedal. They are similar to the correct Legris fittings, but with a shorter hex profile. You need two for a Proton Pack, and one for a Ghost Trap pedal.

$4.00

In Stock: 45

Quantity:

Proton Pack / Ghost Trap: Legris Straight Fittings (3/16" OD)

The Legris straight fittings for use on the Proton Pack, and Ghost Trap pedal. Sold individually, and with the grey cap. THESE ARE RARE! You need two for a Proton Pack, and one for a Ghost Trap pedal. NOTE: These are 3/16" OD. They will require slightly large tubing than what was on the props, or you will need to glue your tubing into them.

$10.00

In Stock: 8

Quantity:

Proton Pack / Ghost Trap: Nycoil Banjo (5/32" OD)

These are the newest version of the Nycoil Banjo. They are shorter than the ones seen on the Proton Pack and Ghost Trap pedal. They are also nickel plated which means they are more silver than gold. Good alternative.

$7.00

Out of Stock!

Tubing: Blue (1/4" OD)

You will receive 3 feet of solid blue 1/4" OD tubing (about enough for one Proton Pack). This is new and higher grade polyurethane. This tubing is precut to lengths of 3 feet.

$5.00

In Stock: 26

Quantity:

Tubing: Yellow (1/8" OD)

You will receive 1 foot of this yellow tubing precut, enough for one or two Proton Packs or Ghost Traps. This tubing is precut to lengths of 1 foot.

$2.50

Out of Stock!

Ghostbusters CON-volution Comic (Cover A)

(W) Keith Dallas, Jim Beard (A) Josh Howard (C) Josh Howard, Nick Runge

What can be more patriotic than spending the Fourth of July at... a comic book convention? That's Ray's thinking at least, although his fellow Ghostbusters think they're in for a boring day of cosplay. But when a dastardly demon with delusions of grandeur unleashes the fireworks, the Ghostbusters must stage a revolution of their own! Written by Keith Dallas (Omega Chase) and Jim Beard (Star Wars), with art by fan-favorite artist, Josh Howard (Dead@17).

$3.99

In Stock: 8

Quantity:

Ghostbusters CON-volution Comic (Cover B)

$3.99

In Stock: 5

Quantity:

Ghostbusters Displaced Aggression #1 (Cover A)

Scott Lobdell (w) o Ilias Kyriazis (a) o Nick Runge, Ilias Kyriazis (c)

"GO WEST, YOUNG VENKMAN!" In chapter one of this all-new Ghostbusters adventure, the 'Busters have been defeated by the pan-dimensional demon lord Kozar'Rai-Father of Gozer, the villain has separated them across the time stream! Dr. Peter Venkman is trapped in 1886, and his only chance to return to present-day Earth and free all of humanity from the Rule of Kozar'Rai has him teaming with a very unexpected (and very beautiful) ally!

$3.99

Out of Stock!

Ghostbusters Displaced Aggression #1 (Cover B)

$3.99

Out of Stock!

Ghostbusters Displaced Aggression #2 (Cover A)

Scott Lobdell (w) o Ilias Kyriazis (a) o Nick Runge, Kyriazis (c)

"A Ray By Any Other Name..." Peter and Rachel (the newest Ghostbuster) arrive in the days of King Arthur, only to learn his trusted advisor Merlin has been replaced by... a bearded, sword-wielding Dr. Ray Stantz! All that and the ghost of Morgan LeFey, too!

$3.99

Out of Stock!

Ghostbusters Displaced Aggression #2 (Cover B)

$3.99

In Stock: 1

Quantity:

Ghostbusters Displaced Aggression #3 (Cover A)

Scott Lobdell (w) o Ilias Kyriazis (a) o Kyriazis, Nick Runge (c)

Part 3: "Here Today, Egon Tomorrow." When Peter, Ray and Rachel arrive in the near-distant future on a Mars colony where they've located the chronologically displaced Dr. Egon Spengler, they discover the base is under the thumb of an imposing and mostly benevolent dictator-Egon himself! It's Ghostbuster vs. Ghostbuster... with the fate of modern-day Earth in the balance!

$3.99

In Stock: 1

Quantity:

Ghostbusters Displaced Aggression #3 (Cover B)

$3.99

In Stock: 1

Quantity:

Ghostbusters Displaced Aggression Book

In this collection of the latest Ghostbusters adventure, the 'Busters have been defeated by the pan-dimensional demon lord Kozar'Rai-Father of Gozer-and the villain has separated them across the time stream! Now Peter, Ray, Egon and Winston must find their own way to return to present-day Earth and free all of humanity from the Rule of Kozar'Rai!

$17.99

In Stock: 2

Quantity:

Ghostbusters Tainted Love (Cover A)

Love is in the air-literally!-as Winston befriends an attractive woman with a ghostly problem in her apartment. But trapping the love-struck apparition proves to be more complicated than the Ghostbusters originally thought. Can Winston step up and save the day? Just how far will Peter go to find a date? And do Ray and Egon ever stop to think about girls, or is it always about trans-dimensional ectoplasmic anomolies with those two?

$3.99

In Stock: 8

Quantity:

Ghostbusters Tainted Love (Cover B)

$3.99

In Stock: 7

Quantity:

Ecto Goggles: Side Knobs

The knobs for the sides of the Ecto Goggle frames, they go over a standard (1/4") socket head capscrew, and come in a pack of two.

$5.00

In Stock: 8

Quantity:

Ghost Trap: 11-Pin Octal Relay

While the real relays are hard to come by, we do have some other relays that closely resemble the ITT relays found on the Ghost Trap pedal.

$10.00

In Stock: 10

Quantity:

Ghost Trap: D-Sub Connector Hood

The grey connector box on the Ghost Trap pedal. These things are now discontinued, and we've got them here new in package!

$5.00

In Stock: 42

Quantity:

Ghost Trap: Female Foster Quick Disconnects

These are the accurate Foster Female quick disconnects for the Ghost Trap. Part number 2022. This is for two connectors.

$20.00

In Stock: 1

Quantity:

Ghost Trap: Front Plate Knob

Here is a real knob from the front of the Ghost Trap in Ghostbusters 2. These are actual vintage knobs and they are fairly rare. You will need two of these knobs for your Ghost Trap!

$4.00

Out of Stock!

Ghost Trap: Grey Ribbon Cable

You will get 1 foot of this 20 pin grey ribbon cable. Enough for atleast 1 Ghost Trap pedal if not two.

$5.00

In Stock: 55

Quantity:

Ghost Trap: Hammond Project Box 1590A

The longer aluminum project box on the Ghost Trap pedal. This is where the Foster Quick Connect mounts with the legris fitting and banjo.

$12.00

In Stock: 7

Quantity:

Ghost Trap: Hammond Project Box 1591L

The other plastic project box for the Ghost Trap pedal. This is the one that gets the relay mounted to it.

$8.00

In Stock: 7

Quantity:

Ghost Trap: Metal Pedal Base

This is a 1/2" Aluminum base for the Ghost Trap pedal. It has been accurately water jet cut to Stefan's specifications and will work with the majority of the parts sold here.

$35.00

Out of Stock!

Ghost Trap: Pedal & Trap Foster Connect MALE (B22-2)

This is the other half to our Pedal to Trap Connection. These are the necessary male Foster Quick Connects #B22-2. They are what mount directly to the Ghost Trap and Pedal. Get these for super accuracy. You need two.. one for the trap & one for the pedal.

$6.00

Out of Stock!

Ghost Trap: Pedal to Trap Connection

This is the cable that goes inbetween the Pedal and the Ghost Trap. Includes 10 feet of loom, and tubing.. plus two female Foster Quick Connectors. (all accurate!)

$25.00

Out of Stock!

Ghost Trap: Relay ITT RM833212

We managed to track down a ton of these ACTUAL relays used on the Ghost Trap pedal. They are identical (same mfg and part number) to the real relays!

$18.00

In Stock: 75

Quantity:

Ghost Trap: Relay Octal Socket

These are the Octal bases used to mount the trap relay to the project boxes. Just plug in, and bolt down.

$8.00

In Stock: 103

Quantity:

Ghost Trap: Resistor (CAL-R)

The CAL-R Ghost Trap resistor is the resistor that is mounted to the Vector Plateing on the side of the Trap. These are the correct ones, gold in color with a heatsink on the top.

$5.00

In Stock: 72

Quantity:

Ghost Trap: Ribbon Cable Connector

This is a black 20 pin ribbon cable connector. Perfect for using on the Ghost Trap pedal.

$5.00

In Stock: 4

Quantity:

Ghost Trap: Side Metal Plating

This is a complete set of Hero Ghost Trap cosmetic plating accurate to Stefan's plans. Each plate is accurately water jet cut from 1/16" aluminum and includes accurate socket head cap screws. (The plating may have a paper backing which may need to be removed).

$30.00

In Stock: 7

Quantity:

Ghost Trap: Vector Plates (Side of Trap)

These are the Vector Plates that attach to the side of the Trap. They are 2" by 3-1/2" in size and are what were used on the real Ghost Traps!

$10.00

Out of Stock!

Ghost Trap: Vector Plates (Trap Pedal)

These are the Vector Plates that attach to the Trap Pedal. They are 3" by 6-1/2" in size and are what were used on the real Ghost Trap Pedal!

$12.00

In Stock: 14

Quantity:

Dan Aykroyd - Behind the Scenes (8x10)

Here is a hillarious photograph taken on the set of Ghostbusters as Dan Aykroyd gets blasted by an air jet!

$10.00

Out of Stock!

Ectomobile Full Color Photograph (8x10)

A full color photograph taken of the Ecto-1 at Best Buy Headquarters in MN.

$10.00

Out of Stock!

Ghostbusters 2: Promotional Photo (8x10)

Here is a picture of Sigourney Weaver, Dan Aykroyd and Bill Murray from a promotion of Ghostbusters 2.

$10.00

Out of Stock!

Ghostbusters ESP Zener Cards

These are the exact same cards used in the film. You get one of each of: circle, cross, couple of wavy lines, square and star. Now you can do your own expirements at home!

$10.00

Out of Stock!

Ghostbusters Fans Lanyard

This is a standard basic lanyard with "Ghostbusters Fans" and "http://www.gbfans.com/" in red text. Has a clip for adding a ID Badge or convention card. LIMITED SUPPLY.

$5.00

Out of Stock!

Ghostbusters Fans Silicone Wristband

This is a black and green Ghostbusters Fans wristband made of silicone with debossed green lettering. Each band has two sayings: "www.GBFans.com" and "Ghostbusters Fans".

Only one wristband is included, even though two are shown.

$2.00

In Stock: 4

Quantity:

Proton Pack: 1/4" Split Wire Loom

You will recieve 2 feet of this 1/4" split wire loom covering. Enough for the coverings on a single Proton Pack.

$2.50

In Stock: 37

Quantity:

Proton Pack: 3/4" Splitless Wire Loom

You will recieve 6 feet of this 3/4" splitless wire loom covering. That's right... there is no annoying split! Enough for the average Proton Pack!

$10.00

In Stock: 41

Quantity:

Proton Pack: Aluminum Trigger Tip

These are fairly accurate aluminum trigger tip assemblies which have been welded with a hole drilled and tapped for the Banjo fitting (sold seperately). These also come with a set screw to secure to an acrylic tube.

$25.00

In Stock: 5

Quantity:

Proton Pack: Arcolectric Clear Neon Indicator

These are Arcolectric clear neon indicator lamps. They are very close to the real things used on the Proton Gun. If wiring up, understand these are neon gas require a 250 volt supply!

$8.00

In Stock: 31

Quantity:

Proton Pack: Arcolectric Red Incandescent Indicator

These are Arcolectric red incandescent indicator lamps. They are very close to the real things used on the Proton Gun. If wiring up, understand these require a 28 volt supply. Also for use on the Ghost Trap pedal!

$8.00

In Stock: 14

Quantity:

Proton Pack: Blue Power Cell Lens

This is the Blue Power Cell Lens made of translucent acrylic. The dimensions are 3/4" x 4-1/2" (oversized to fit into power cell).

$5.00

Out of Stock!

Proton Pack: Booster Ladder Frame

These frames are made from resin and have a ribbed, and brick pattern on them. They come unpainted, and may require some trimming.

$15.00

Out of Stock!

Proton Pack: Clear Acrylic Tube with Frosting

This is a 7/8" OD Acrylic tube with the appropriate frosting. It has a beveled edge and is roughly 6" in length. *Note that the frosted areas have a slightly small diameter.

$15.00

Out of Stock!

Proton Pack: Clippard Brass Elbow

This is brass elbow that is used in three places on the Proton Pack. You will be getting both peices, no need to buy them seperately. Sold Individually. You need 3 of these for each Proton Pack.

$4.00

Out of Stock!

Proton Pack: Clippard Hose Barb

The Clippard Hose Barb is used on the Proton Gun to go with the green tubing You need two of these for each Proton Gun.

$2.50

In Stock: 68

Quantity:

Proton Pack: Clippard R-701 Resin Replica

These resin cast R-701 valves are untrimmed, and require a little bit of finishing. Does not include a label. Click on image for unfinished photo.

$5.00

Out of Stock!

Proton Pack: Dale PH-25 Resistor

The PH-25 is the rare round resistor that is on the Ion Arm of the Proton Pack. It is a 25 watt resistor made by Dale in the early 1980's. The real deal!

$7.50

In Stock: 58

Quantity:

Proton Pack: Dale RH-50 Resistor

The RH-50 is the longer resistor on the Ion Arm. It is the one with the blue tubing coming out of it and running to the PPD and Clippard Brass Elbow. These are the correct ones used on the Proton Pack with the Dale logo!

$5.00

In Stock: 61

Quantity:

Proton Pack: Dixie Cup Bracket

These are a perfect alternative to more expensive Proton Gun holsters. Also works for Ghost Traps!

$6.00

Out of Stock!

Proton Pack: Ion Arm (Resin Cast)

Here are some resin cast Ion Arms. They are hallow and need minimal clean up and sanding. Some may need to be trimmed to get the correct total length.

$12.00

Out of Stock!

Proton Pack: Ion Arm Assembly (GB1)

This is an all metal Ion Arm peice that includes knurled brass rods, two socket head cap screws and a Clippard L-Fitting.

$40.00

Out of Stock!

Proton Pack: Ion Arm Assembly (GB2)

This is an all metal Ion Arm peice that includes knurled brass rods, and two socket head cap screws.

$30.00

Out of Stock!

Proton Pack: LED Cliplites (Red & Clear)

You are bidding on LED cliplite covers. These go on the Proton Gun over the leds for good coverings. You will be getting a set of two of each color (4 total).

$2.50

In Stock: 4

Quantity:

Proton Pack: Metallic Foil Clippard Labels

These are absolutely 100% amazing replica Clippard labels. Printed up on a silver metallic foil that is double sided and pre-cut. A MUST HAVE for those Resin Replica Clippard Valves. You get a set (R-331 and R-701) with each order.

$6.00

Out of Stock!

Proton Pack: Red Cyclotron Len

This is the Red Cyclotron Lens made of translucent acrylic. It is just under 2" square. You need four for a single Proton Pack.

$3.00

Out of Stock!

Proton Pack: Ribbon Cable

This is the Ghostbusters 2 style ribbon cable. It is the correct 60 conductor ribbon cable with a common tan line.

You will get 18" (enough for one Proton Pack) for each order.

$10.00

In Stock: 17

Quantity:

Proton Pack: Ribbon Cable Aluminum Hold Down

These are laser cut 1/16" aluminum ribbon cable hold downs for your Proton Pack, includes an upper and lower plate as well as two screws. NOW MORE ACCURATE!

$15.00

In Stock: 1

Quantity:

Proton Pack: Ribbon Cable Clamp

The correct insulated cable clamp for use with the Ribbon Cable on the Proton Pack. These are the real deal!

$3.00

In Stock: 63

Quantity:

Proton Pack: Sage Resistor

This is the correct smaller resistor on the Ion Arm of the Proton Pack. It is very rare, and has not yet had very high distrubution. We are very proud to offer this resistor here to you guys!

$5.00

In Stock: 59

Quantity:

SMC 5/32" Elbow Fitting (Similar to Legris)

This is a fitting that is similar to the fittings used on the Proton Pack (Legris Fitting), these however are a modern day replacement and are made by SMC. You need three for each Proton Pack.

$6.00

In Stock: 3

Quantity:

Ghostbusters Logo Neon Sign

Estimated Arrival: Oct 31, 2010

No need to be afraid of any ghost with this sign on display in your home or office! Ghosts willknow they are in the presence of a true Ghostbusters fan when they see this light displayed in all of its glowing glory. This full-color neon sign measures 12" high and 15" tall (with base) and features a universal power cord with adaptor for use in North America, Japan, and the EU. This sign is perfect for desk, tables, and firehouses everywhere.

$124.99

Coming Soon!

Ghostbusters No-Ghost Logo Bank

When there's something strange in your neighborhood, who you gonna call? Ghostbusters! Featuring the classic logo design that started it all, celebrate the 25th Anniversary of the Ghostbusters franchise with this nine-inch collectible bank from one of the most hilarious sci-fi action-adventures in history! So face your inner demons and prove once and for all that you ain't afraid of no ghosts!

$19.99

In Stock: 8

Quantity:

Ghostbusters Series 3 Minimates

The top-selling Ghostbusters Minimate line continues with this exclusive four-pack only available in specialty stores! This four-pack includes the marshmallow-covered Gooey Egon and Gooey Winston from the original film as well as the sequel's Janine Melnitz and EPA lawyer Walter Peck! Each Ghostbusters Minimate stands two inches tall with 14 points of articulation and a wealth of pint-sized accessories.

$15.99

In Stock: 32

Quantity:

Ghostbusters Slimer Sours Candy

Everyone's favorite ghost, Slimer, shares his favorite sour candies in these tins that feature the memorable Ghostbusters logo from the blockbuster films.

Price is for 1 tin of candy.

$3.99

In Stock: 2

Quantity:

Ghostbusters Slimer Statue with Making of DVD & Box!

Ghostbuster's Slimer leaps from the screen into a specially made resin statue from Solid Thought! Designed by Steve Johnson, the creator of the cinematic Slimer, this item comes in a custom "Ecto Containment Unit" box along with an exclusive behind-the-scenes DVD detailing the making of the statue as well as how Slimer was created and performed in the movies - a must for all Ghostbusters fans. This translucent spectre statue stands 10" tall and measures 9" wide. Slimer is possibly the most iconic ghost in cinema, and even went on to star in his own cartoon series; now he can haunt your own home, too!

$29.99

In Stock: 4

Quantity:

Ghostbusters Video Game Minimates

On Sale!

Previously announced for Amazon.com, this exclusive Ghostbusters Minimates box set is instead now available to comic stores nationwide! Featuring all-new characters from this summer's Ghostbusters III Video Game, this set contains the Chef Ghost, the Architect, Azetlor and the Black Slime Monster! Each two-inch Minimate features 14 points of articulation plus additional interchangeable parts and accessories!

$11.99

In Stock: 27

Quantity:

Tubing: Green (1/4" OD)

You will receive 1 foot of this green tubing (1/4" OD) precut. Enough for several Proton Guns. This tubing is precut to lengths of 1 foot.

$2.50

In Stock: 80

Quantity:

Tubing: Red (1/4" OD)

You will recieve 2 feet of solid red 1/4" OD tubing (about enough for one Proton Pack). This tubing is precut to lengths of 2 feet.

$2.50

In Stock: 27

Quantity:

Tubing: Red (5/32" OD)

You will receive 3 feet of this 5/32" OD tubing. About enough for one Proton Pack. This tubing is precut to lengths of 3 feet.

$4.00

In Stock: 39

Quantity:

Uniform: Chemical Gloves

Chemical Gloves similar to the ones the Ghostbusters used! These are size medium and will fit a wide range of hands.

$5.00

In Stock: 15

Quantity:

Uniform: Key Chain Belt Clips

Here are some semi accurate real leather key chains for the Pistol Belt. We recommend 2 for each Belt.

$6.00

In Stock: 39

Quantity:

Uniform: Khaki Flight Suit Coveralls

Perfect Flight Suit for your Ghostbusters Uniform. Made of 35% Cotton / 65% Polyester. Not recommended for tall people, no returns.

Small fits 33" - 37" Chest. Medium fits 37" - 40" Chest. Large fits 40" - 43" Chest. XL fits 43" - 46" Chest. XXL fits 46" - 49" Chest. XXXL fits 49" - 52" Chest. XXXXL fits 52" - 55" Chest.

$35.00 - $38.00

In Stock!

Size:

Uniform: No Ghost 1 Style Patch (Iron-On)

This patch has the classic no ghost logo, printed on canvas. The best patch you can buy. This one has an iron-on backing. We also carry one without.

$12.00

In Stock: 10

Quantity:

Uniform: No Ghost 1 Style Patch (Sew-On)

This patch has the classic no ghost logo, printed on canvas. The best patch you can buy. This one has no backing for sewing on. We also carry one with an iron-on backing.

$10.00

In Stock: 4

Quantity:

Uniform: No Ghost 2 Style Patch (Iron-On)

This patch has the classic ghost flashing a two or a peace sign. This patch is printed on canvas. The best patch you can buy. This one has an iron-on backing. We also carry one without.

$12.00

In Stock: 24

Quantity:

Uniform: No Ghost 2 Style Patch (Sew-On)

This patch has the classic ghost flashing a two or a peace sign. This patch is printed on canvas. The best patch you can buy. This one has no backing for sewing on. We also carry one with an iron-on backing.

$10.00

In Stock: 20

Quantity:

Uniform: Pistol Belt (Black)

These are the pistol belts they used in Ghostbusters 2 with the darker uniforms.

$15.00

In Stock: 14

Quantity:

Uniform: Pistol Belt (Khaki)

These are the pistol belts they must have used in Ghostbusters! They are khaki, but look very grey. Get them now, no dyeing required.

$12.00

In Stock: 14

Quantity:

Uniform: Video Game Uniform Flashlight (C-Cell)

This is a C-Cell Olive Drab Military Flashlight just like the ones used in Ghostbusters: The Video Game. Also includes a red, blue, white and yellow lense.

$8.00

In Stock: 13

Quantity:

Uniform: Video Game Uniform Flashlight (D-Cell)

This is a D-Cell Olive Drab Military Flashlight just like the ones used in Ghostbusters: The Video Game. It is bigger than the C-Cell version, choose whatever you feel is more accurate. Also includes a red, blue, white and yellow lense.

$10.00

In Stock: 9

Quantity:

Uniform: Yellow Hose

You will get 5 feet of this yellow colored uniform hose. Its 1/2" in diameter and closely matches the real stuff!

$10.00

In Stock: 1

Quantity:

Welcome to GBFans!

Please [Login] or [Register]

© 1998-2010 Ghostbusters Fans & Ghostbusters Prop Archive - Created and Written by AJ Quick
"Ghostbusters" and "Ghost-Design" are registered Trademarks of Columbia Pictures Industries Inc.
Send Ghostbusters Fans an Email - webmaster@gbfans.com - The Largest FIRST Robotics Archive - Jurassic Jeep - 65 Million Years in the Making