Movies |

Home > Shop > Ghost Trap Parts

Frequently Asked Questions - Ghost Trap Parts

We are currently on hiatus until May 21st. Orders placed during this time will not ship until May 22nd or later.

Here at the Ghostbusters Fans we are dedicated to providing you with genuine parts for your Ghostbusters Props. We keep our items in stock and have them ready to ship after you place your order. We accept payments via credit card: Visa, Mastercard, Discover, American Express. Please note, there are limited quantities available of each part. Even though we may have several instock, you may only be able to purchase a select amount.

Want to be kept up to date about restocks and new items? Join the Ghostbusters Fans Shop Mailing List!

Ghost Trap: 20 Pin Card Edge Connector

This is the 20-pin card edge connector found on the Ghost Trap pedals in Ghostbusters 2. It has the grey ribbon cable secured to it and is attached to the 1591L Hammond project box.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: 20-Pin Ribbon Cable Connector

This is a black 20 pin ribbon cable connector. Used on the Ghostbusters 2 Ghost Trap with the 20 pin grey ribbon cable. This sits on the D-Sub housing, but can also be used with a 20 pin grey header found on GB1 Ghost Traps.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: 20-Pin Ribbon Cable Connector

Ghost Trap: 20-Pin Trap Pedal Grey Header

For the Ghostbusters 2 trap pedal, these grey wire headers are perfect for recreating the look. Use them with the 20-pin connector and the 20-pin grey ribbon cable.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: 20-Pin Trap Pedal Grey Header

Ghost Trap: 26-Pin Ribbon Cable Connector

This is a black 20 pin ribbon cable connector. Used on the Ghostbusters Ghost Trap with the 26 pin grey ribbon cable and plugs into the grey header on the Hammond project box.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: 26-Pin Ribbon Cable Connector

Ghost Trap: 26-Pin Trap Pedal Grey Header

For the Ghostbusters 1 trap pedal, these grey wire headers are perfect for recreating the look. Use them with the 26-pin connector and the 26-pin grey ribbon cable.

$5.00

Get notified when its back in stock!Out of Stock!

Sucessfully added to your Cart

Ghost Trap: 26-Pin Trap Pedal Grey Header

Ghost Trap: D-Sub Connector Hood

The grey connector box on the Ghost Trap pedal. These things are now discontinued, and we've got them here new in package!

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Female Foster Quick Disconnects (2022)

These are the accurate Foster Female quick disconnects for the Ghost Trap. Part number 2022. This is for two connectors.

$20.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Female Foster Quick Disconnects (2022)

Ghost Trap: Foster Male Coupler (B22-2)

This is the other half to our Pedal to Trap Connection. These are the necessary male Foster Quick Connects #B22-2. They are what mount directly to the Ghost Trap and Pedal. Get these for super accuracy. You need two.. one for the trap & one for the pedal.

$6.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Ghostbusters 1 Side Knob

Another newly found item! These are believed to be the real knobs used on the Ghost Traps in Ghostbusters 1. They are made from black plastic and fit on a 1/4" shaft with a flat, d-shaft, or keyed shaft.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Ghostbusters 2 Side Knob

We finally have them in stock! These are the real knobs used on the Ghost Traps in Ghostbusters 2. They are made from aluminum and use set screws to attach to a 1/4" shaft!

$10.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Grey Ribbon Cable (20-Pin)

You will get 1 foot of this 20 pin grey ribbon cable. Enough for atleast 1 Ghost Trap pedal if not two.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Grey Ribbon Cable (26-Pin)

You will get 1 foot of this 26 pin grey ribbon cable, accurate for a Ghostbusters 1 trap pedal. Enough for atleast 1 Ghost Trap pedal if not two.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Hammond Project Box 1590A

The longer aluminum project box on the Ghost Trap pedal. This is where the Foster Quick Connect mounts with the legris fitting and banjo.

$12.00

In Stock! Limited Supply! Order Soon!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Hammond Project Box 1591L

The other plastic project box for the Ghost Trap pedal. This is the one that gets the relay mounted to it.

$8.00

In Stock! Limited Supply! Order Soon!

Sucessfully added to your Cart

Quantity:

Ghost Trap: MDF Pedal Base

This is a 1/2" MDF base for the Ghost Trap pedal. It has been accurately CNC cut to Stefan's specifications and will work with the majority of the parts sold here.

$10.00

Get notified when its back in stock!Out of Stock!

Sucessfully added to your Cart

Ghost Trap: Red Light Lens Cover

This cover is nearly identical to the original light used on the Ghost Trap. It will require a LED and light holder underneath, but can be glued in place very easily!

$3.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Relay ITT RM833212

We managed to track down a ton of these ACTUAL relays used on the Ghost Trap pedal. They are identical (same mfg and part number) to the real relays!

$18.00

Get notified when its back in stock!Out of Stock!

Sucessfully added to your Cart

Ghost Trap: Relay Octal Socket

These are the Octal bases used to mount the trap relay to the project boxes. Just plug in, and bolt down.

$8.00

In Stock!

Sucessfully added to your Cart

Quantity:

Ghost Trap: Resistor (CAL-R)

The CAL-R Ghost Trap resistor is the resistor that is mounted to the Vector Plateing on the side of the Trap. These are the correct ones, gold in color with a heatsink on the top.

$5.00

In Stock!

Sucessfully added to your Cart

Quantity:

Proton Pack: Dry Rub Sticker Transfer Sheet

Perfect "dry rub" sticker transfer sheet for your Proton Pack AND Ghost Trap replicas. Just place over the area you wish to apply, and rub your finger nail across the transfer paper for an instant transfer!

Created by GBFans members: Julz, Vincenzo330, mburkit, and valentino_42.

$9.99

Get notified when its back in stock!Out of Stock!

Sucessfully added to your Cart

Proton Pack: Dry Rub Sticker Transfer Sheet

Proton Pack: Legris Banjo Replica Fitting

These are machined brass replica Legris Banjo Fittings that are visually identical to the ones used on the Proton Packs. These fittings are for 4mm or 5/32" tubing, and have all the right measurements as the real vintage fittings! Also includes an actual banjo bolt that is just like the real ones!