Return to Home Page - Ghostbusters Fans
   Movies | Cartoons | Games | Publications | Equipment | Toys | Shop | Fans | Chat | Community
    
Home > Shop > Proton Pack

Proton Pack

Here at the Ghostbusters Fans we are dedicated to providing you with genuine parts for your Ghostbusters Props. We keep our items in stock and have them ready to ship after you place your order. We accept PayPal (Visa, Mastercard, Discover, E-Check, and Bank Transfers) only! Please note, there are limited quantities available of each part. Even though we may have several instock, you may only be able to purchase a select amount.

Categories: Proton Packs, Ghost Traps, Uniforms, Photographs, Shirts & Toys.

Proton Pack: 1/4" Split Wire Loom

You will recieve 2 feet of this 1/4" split wire loom covering. Enough for the coverings on a single Proton Pack.

$2.50

In Stock: 85
Quantity:   


Proton Pack: 1/4

Proton Pack: 3/4" Splitless Wire Loom

You will recieve 6 feet of this 3/4" splitless wire loom covering. That's right... there is no annoying split! Enough for the average Proton Pack!

$10.00

In Stock: 50
Quantity:   


Proton Pack: 3/4

Proton Pack: Blue Power Cell Lens

This is the Blue Power Cell Lens made of translucent acrylic. The dimensions are 3/4" x 4-1/2" (oversized to fit into power cell).

$5.00

Out of Stock!


Proton Pack: Blue Power Cell Lens

Proton Pack: Booster Ladder Frame

These frames are made from resin and have a ribbed, and brick pattern on them. They come unpainted, and may require some trimming.

$15.00

Out of Stock!


Proton Pack: Booster Ladder Frame

Proton Pack: Clear Acrylic Tube with Frosting

This is a 7/8" OD Acrylic tube with the appropriate frosting. It has a beveled edge and is roughly 6" in length. *Note that the frosted areas have a slightly small diameter.

$15.00

Out of Stock!


Proton Pack: Clear Acrylic Tube with Frosting

Proton Pack: Clippard Brass Elbow

This is brass elbow that is used in three places on the Proton Pack. You will be getting both peices, no need to buy them seperately. Sold Individually. You need 3 of these for each Proton Pack.

$4.00

In Stock: 70
Quantity:   


Proton Pack: Clippard Brass Elbow

Proton Pack: Clippard Hose Barb

The Clippard Hose Barb is used on the Proton Gun to go with the green tubing You need two of these for each Proton Gun.

$2.50

In Stock: 155
Quantity:   


Proton Pack: Clippard Hose Barb

Proton Pack: Clippard R-701 Resin Replica

These resin cast R-701 valves are untrimmed, and require a little bit of finishing. Does not include a label. Click on image for unfinished photo.

$5.00

Out of Stock!


Proton Pack: Clippard R-701 Resin Replica

Proton Pack: Dale PH-25 Resistor

The PH-25 is the rare round resistor that is on the Ion Arm of the Proton Pack. It is a 25 watt resistor made by Dale in the early 1980's. The real deal!

$6.00

Out of Stock!


Proton Pack: Dale PH-25 Resistor

Proton Pack: Dale RH-50 Resistor

The RH-50 is the longer resistor on the Ion Arm. It is the one with the blue tubing coming out of it and running to the PPD and Clippard Brass Elbow. These are the correct ones used on the Proton Pack with the Dale logo!

$5.00

Out of Stock!


Proton Pack: Dale RH-50 Resistor

Proton Pack: Dixie Cup Bracket

These are a perfect alternative to more expensive Proton Gun holsters. Also works for Ghost Traps!

$6.00

Out of Stock!


Proton Pack: Dixie Cup Bracket

Proton Pack: Ion Arm (Resin Cast)

Here are some resin cast Ion Arms. They are hallow and need minimal clean up and sanding. Some may need to be trimmed to get the correct total length.

$12.00

Out of Stock!


Proton Pack: Ion Arm (Resin Cast)

Proton Pack: Ion Arm Assembly (GB1)

This is an all metal Ion Arm peice that includes knurled brass rods, two socket head cap screws and a Clippard L-Fitting.

$40.00

Out of Stock!


Proton Pack: Ion Arm Assembly (GB1)

Proton Pack: Ion Arm Assembly (GB2)

This is an all metal Ion Arm peice that includes knurled brass rods, and two socket head cap screws.

$30.00

Out of Stock!


Proton Pack: Ion Arm Assembly (GB2)

Proton Pack: LED Cliplites (Red & Clear)

You are bidding on LED cliplite covers. These go on the Proton Gun over the leds for good coverings. You will be getting a set of two of each color (4 total).

$2.50

In Stock: 46
Quantity:   


Proton Pack: LED Cliplites (Red & Clear)

Proton Pack: Metallic Foil Clippard Labels

These are absolutely 100% amazing replica Clippard labels. Printed up on a silver metallic foil that is double sided and pre-cut. A MUST HAVE for those Resin Replica Clippard Valves. You get a set (R-331 and R-701) with each order.

$6.00

Out of Stock!


Proton Pack: Metallic Foil Clippard Labels

Proton Pack: Red Cyclotron Len

This is the Red Cyclotron Lens made of translucent acrylic. It is just under 2" square. You need four for a single Proton Pack.

$3.00

Out of Stock!


Proton Pack: Red Cyclotron Len

Proton Pack: Ribbon Cable

This is the Ghostbusters 2 style ribbon cable. It is the correct 60 conductor ribbon cable with a common tan line.

You will get 18" (enough for one Proton Pack) for each order.

$10.00

In Stock: 54
Quantity:   


Proton Pack: Ribbon Cable

Proton Pack: Ribbon Cable Aluminum Hold Down

These are laser cut 1/16" aluminum ribbon cable hold downs for your Proton Pack, includes an upper and lower plate as well as two screws. NOW MORE ACCURATE!

$15.00

In Stock: 40
Quantity:   


Proton Pack: Ribbon Cable Aluminum Hold Down

Proton Pack: Ribbon Cable Clamp

The correct insulated cable clamp for use with the Ribbon Cable on the Proton Pack. These are the real deal!

$3.00

In Stock: 49
Quantity:   


Proton Pack: Ribbon Cable Clamp

Proton Pack: Sage Resistor

This is the correct smaller resistor on the Ion Arm of the Proton Pack. It is very rare, and has not yet had very high distrubution. We are very proud to offer this resistor here to you guys!

$5.00

Out of Stock!


Proton Pack: Sage Resistor

SMC 5/32" Elbow Fitting (Similar to Legris)

This is a fitting that is similar to the fittings used on the Proton Pack (Legris Fitting), these however are a modern day replacement and are made by SMC. You need three for each Proton Pack.

$6.00

In Stock: 65
Quantity:   


SMC 5/32



Welcome to GBFans!
Please [Login] or [Register]

 
© 1998-2010 Ghostbusters Fans & Ghostbusters Prop Archive - Created and Written by AJ Quick
"Ghostbusters" and "Ghost-Design" are registered Trademarks of Columbia Pictures Industries Inc.
Send Ghostbusters Fans an Email - webmaster@gbfans.com