Return to Home Page - GBFans.com
 

THIS IS AN OLD VERSION OF THIS PAGE. TO VIEW THE NEWEST VERSION CLICK HERE


[Discuss] [History]Ribbon Cable

The ribbon cable is one of the defining characteristics of the difference between the Ghostbusters and Ghostbusters 2 proton packs. Ribbon cable is a cable with many conducting wires running parallel to each other on the same flat plane. It is rainbow ribbon cable due to the many different colors of wire used. On the proton pack, the ribbon cable runs from a clamp on the top left side of the cyclotron and twists around is clamped on the booster frame and feeds and disappears into the cosmetic plating below the gear box/crank generator. It is probably one of the biggest/eye catching features on the proton pack.'

Unknown Ribbon Cable (Ghostbusters)

'The ribbon cable used in Ghostbusters has yet to be located. It is currently one of the most sought after pieces, because its discovery will allow builders to start making packs screen-accurate to the first movie, rather than the second. There are only a few photos that show enough detail to actually see the cable. Some believe it is a fabric and wire combination, or that the wires were custom-made only for the movie.

The ribbon cable should have roughly 22 conductors, or roughly the same size, perhaps 22 AWG. The colors of the wires are thought to be as follows:

Brown - Red - Orange - Yellow - Green - Blue - Light Blue - Light Blue - Purple - Light Blue - White - Black - Blue - Light Blue - Blue - White / Brown - White / Red - White / Orange - White / Yellow - White / Green - White / Blue

There are a few areas in the middle that are uncertain, and therefore it is not known what colors exactly are there. This page will be updated as more information becomes available.



Based on further research by namebrand, the ribbon cable seems to be a custom application cable with only 16 wires rather than 22, with wire groupings seperated by a semi-transparent flexible plastic much the same as the laminate used on the GB2 Spectra Strip. The color pattern is as follows:

Brown - Red - Orange - Yellow - Green - Blue - spacer - Purple - Grey - White - Black - spacer - White / Brown - White / Red - White / Orange - White / Yellow - White / Green - White / Blue



Drawing by Namebrand'

Spectra Strip Ribbon Cable (Ghostbusters 2)

'The ribbon cable on the proton packs in the second movie is made by Spectra Strip. It is still being made with the correct # of wires, 30 pairs (60 wires total). It is model# 132-2801-060 and is readily available from many surplus stores.

On the correct ribbon cable there is a 2-3" section of the ribbon cable that is not twisted at all. This part is usually concealed inside the curl and wrap of the ribbon cable as it goes into the cable clamp. There are alternatives out there that do not have the straight section, as well as others that have fewer wires and/or different colored wires.

The color sequences for the ribbon cable, if you are feeling adventurous and want to make your own or cannot find some, is as follows:

Black - Brown - White - Brown - Grey- Brown- Purple - Brown - Blue - Brown - Green - Brown - Yellow - Brown - Orange - Brown - Red - Brown - Darker Brown - Brown. Repeat that pattern a total of 3 times, until you have 60 wires total.




This page was last edited by Zack on November 23, 2008, 8:31 pm
Link to this page: http://www.gbfans.com/equipment/proton-pack/ribbon-cable/


 
© 1998-2020 GBFans.com - Created by AJ Quick
"GBFans.com" is a registered Trademark of GBFans LLC.
"Ghostbusters" and "Ghost-Design" are registered Trademarks of Columbia Pictures Industries Inc.
Send Ghostbusters Fans an Email - webmaster@gbfans.com - Jurassic Jeep - 65 Million Years in the Making - CNC.xyz