Page 3 of 5

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:March 28th, 2015, 9:40 am
by pyhasanon
Dude, your ribbon twist looks so much better than mine... that was the look I was aiming for, but I just couldn't get it to work... Good job!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:March 28th, 2015, 11:29 pm
by Lowberg
Thanks man! I coiled it around the split loom to try and give it that form and then removed the split loom. I'm going to have to re-do it obviously anyways when I re-assemble it after painting.

I'm probably going to attach it on the inside with the small socket cap bolt and washer

Also my friend pointed out to me that my P clamp is upside down. whoops! lol

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:March 28th, 2015, 11:40 pm
by pyhasanon
WHA--?!? HA! I didn't even notice! LOL! Distracted by all the lovely aluminum and ribbon cable twist... =P

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:March 29th, 2015, 5:02 am
by spark
WHA--?!? HA! I didn't even notice! LOL! Distracted by all the lovely aluminum and ribbon cable twist... =P
Haha I know right! I had to find something to bust his chops about because his pack is so nice. :grin:

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:March 31st, 2015, 5:24 pm
by gbchef
If your still looking for a way to weather your bellows I found a great method! I bought a bottle of brass and bronze aging solution off Amazon. 20 second dip in it and a once over with some 0000 steel wool and it came out awesome!!!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 8th, 2015, 5:58 pm
by Lowberg
Alright I'm back in the game. It was like 80 degrees today so I decided to get some painting done on the thrower parts.
Image
Image

Color came out as hoped, I might sand down the grips and re-paint with a hobby paint or gloss black to try and match the real ones better.

Still need a few bolts here and there

Finishing up with school this week so I'll be able to maybe tackle the shell and other parts next week

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 8th, 2015, 8:08 pm
by Grimmy GB
Woop, woooooooop! I'm keeping my eye one you, sir...

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 8th, 2015, 11:37 pm
by Venkman's Swagger
Drool!!!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 15th, 2015, 6:34 pm
by Lowberg
Okay I'm finally done with school with the semester WOOOHOO. That means less time studying and more time to finish up the unlicensed nuclear accelerator .


After a long process of breaking down all the parts I got some time in to doing some paint and other things.
So here's the updates.

My Ion arm rod was way too long. The measurements of the Sony Lobby Hero taken by Vince and friends showed the correct bottom rod length to be 4.125" and mine was like 5.25" So I cut it down and replaced the top rod with the excess to fix the proper length on that. I bought 2 of those Ion rods so here they are side by side so you can see the huge difference

Image

Then I was able to get some great painting time today so I rigged up all my parts on coat hanger wire and went to town.
Image

I used this paint for all my parts:
Image

After all my parts were dry enough to handle I gave them all a thorough rub down with 0000 Steel Wool.
This kills any glaring sheen and gives the parts a great gun-metal black look

This is pre-steel wool:
Image

And after steel wool:
Image

Did some slight weathering on the Ion Arm Rods to match the GB1 style. Steel wool also is great for weathering, its a lot more controlled and wont scratch the actual aluminum when you make your marks:
Image

For some reason the PPD's on the hero packs looked like they took the most abuse so I experimented with the steel wool to try and really rough up the paint on mine. The label will cover most of it but It was a cool experiment.

Image
Image

And the rest of the aluminum parts after buffing down.
Image

Shell is up next!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 15th, 2015, 6:52 pm
by Lowberg
Also semi un-related but I've also been working on a replica of Han Solo's blaster.
The guys in the star wars community use this chemical on their aluminum parts that turns them a black finish.
I used it on mine. It gives it a very tatooine-esque "lost in the desert" feel. While I was using it I couldn't stop imagining what It would look like on proton pack parts lol I wouldn't dare try it but I thought you guys would find that interesting

Here I used it on the scope and flash hider of the gun. No paint involved. It just starts a chemical reaction with the metal and turns it a charred black. Cool effect!

Image

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 15th, 2015, 6:56 pm
by thebigone2087
I believe that is "Aluminum Black" Correct? Birchwood Casey makes it. It just so happens I am working on a replica of that very piece ;-)

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 15th, 2015, 7:02 pm
by Lowberg
Yes sir, if you use it do it outside. It starts smoking and smells like rotten eggs mixed with deadly vapors lol

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 15th, 2015, 9:27 pm
by propcicle
Sweet blaster. Not to derail, but what did you use for the broom handle Mauser base? Denix maybe?

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 15th, 2015, 9:36 pm
by Lowberg
Yes. Denix Mauser replica and a kit from Dark Energy Creations

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 18th, 2015, 6:43 pm
by Lowberg
The Bosh shell is insanely thick in some of the front areas. I had to significantly grind down the inside of the cyclotron rings and the power cell window to get it to the proper thickness.

I made a couple depth gauges that would be taped from the front into the rings and power cell window. Then grinded down with a dremel and shop vac until they were flush with the gauge.

Image

Image

Image

Image

I made the ring areas approximately 1/4" thick and the power cell window approximately 5/16" thick.

I'm hoping to paint the shell tomorrow!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 21st, 2015, 12:32 pm
by Lowberg
And she's painted ladies and gentleman! The texture really POPS now!

Image
Image
Image

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 21st, 2015, 1:34 pm
by Venkman's Swagger
Damn that shell!! Awesome paint job mate

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 21st, 2015, 4:35 pm
by Lowberg
Spent the afternoon throwing her together, painted my elbows and crank knob. It's looking like the real deal!!. I cant wait to get the mobo painted!

Image
Image
Image
Image

Also, I need an answer from an expert. Are the bumper washers in GB1, brass or silver?
I can't really tell from the screen shots and on the 1984 pics that recently surface they appear to be nickel.

Image

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 21st, 2015, 5:25 pm
by Hijacker
Pretty sure they're regular washers and not brass. But I do think the brass looks nice.

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 30th, 2015, 12:16 am
by Lowberg
Little video update on the thrower. Sorry about the quiet audio.


Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 30th, 2015, 7:08 am
by Grimmy GB
Looks great dude!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 31st, 2015, 11:56 am
by Lowberg
I take that back, extending barrel is a GO!!




Got the dry rub transfers on and some decals, dry rubs were pretty easy, messed up a couple of the red circles and some of the small white ones, but it looks cool. Battle damaged!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 31st, 2015, 12:06 pm
by Venkman's Swagger
Great work Lowberg!!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:May 31st, 2015, 4:00 pm
by Hammer
Looking great!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:June 2nd, 2015, 9:18 pm
by Lowberg
Thanks boys!

Small update, after Demon Vice Commander posted his new reference pics of the Murray pack today I was inspired to do some weathering to the thrower! I think weathering parts is something I excel at. I've done a very little bit to the shell and parts as well.

Image

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:June 2nd, 2015, 10:42 pm
by TK5759
That weathering is PERFECT!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:June 2nd, 2015, 10:43 pm
by JaysOccult
Agreed! Looks killer!

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:June 2nd, 2015, 11:38 pm
by Venkman's Swagger
Yup, you're right!! You do excel at weathering. Awesome job

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:June 3rd, 2015, 12:13 am
by Sephiroth
Looking good, excellent weathering!

As for the bumper on the GB1 Spengler hero pack; the bumper screw placement is distinct from other hero packs in that they are spaced further apart and use steel washers instead of brass washers.

Re: Lowberg's GB1 Hero Pack and Thrower Build

PostPosted:June 3rd, 2015, 10:07 pm
by Lowberg
Looking good, excellent weathering!

As for the bumper on the GB1 Spengler hero pack; the bumper screw placement is distinct from other hero packs in that they are spaced further apart and use steel washers instead of brass washers.
Cool! I didn't know that!. I think I'll stick with the steel washers for now!


Tonight I got most of the electronics installed. I'm only using one speaker on this build so I marked it off and drilled holes with a template.

Image

I used some spacers too to give it a little bit of lift off the motherboard, the edge of the speaker cone flexes during loud sounds such as the startup sounded so this will prevent it from bumping against the motherboard.

Image

I also recommend using a drip of loctite thread locker on the bolts. It will ensure that nothing gets loose over time and rattle from the speaker vibrating.

For my power cell I just made a bracket and riveted it on, like everybody else does. This is probably the easiest way and it allows a little room to flex it back into place should it get bumped while putting the shell on and off.

Image

I didn't want to use reflectors on this build so I cut some aluminium standoffs and mounted some perfboard to them with 1/4" bolts, 4" in length. I then got some 1/2" long nylon spacers and glued the LEDs to them from underneath.

Image
Image

I got the LEDs as close as possible to minimize bleed, I think it looks really good.

Also I changed the setting on the light kit to have the lights snap on and off instead of fade in and out.




I also can't decide on the speed setting, in the movie the cyclotron lights moved much faster than this, but the power cell lights are approximately this speed. Should I make the cyclotron lights the accurate faster speed and have a crazy fast power cell light or should I just leave it at a more normalish speed like this?

You can see here at around the 1:05 mark the faster speed (also lol egon's bottom right light is dead, never noticed that)
Also I think its cool that some of the cyclotrons went counter clockwise and some went clockwise.