User avatar
By Kingpin
#4945869
I had a look at a couple of sellers in the UK, BenofKent and Ecto Props, but neither seem to stock the brass spacers. Unfortunately America is often still the best place to get parts due to the wider variety compared to what's currently-offered in the UK market.
User avatar
By l3w1sb159
#4945873
Would you happen to know the length and diameter of the spacers so I could have a look for possibly some brass tubing and cut it to size?

Or I could just stack some washers... but I'm worried that might look a bit crap....
User avatar
By RedSpecial
#4947009
Look for brass clock bushings.
They are already cut to the correct thickness and diameter ( 4mm by 10mm) and have a pilot hole drilled in the center so you just have to drill it out in order to fit your bolts.
By tobycj
#4947091
mburkit wrote: March 23rd, 2021, 8:58 am Just go to a hardware store and buy #4 brass washers. It always looked like they stacked 3-4 of them on each screw.
Brass washers are seemingly a bugger to find off the shelf in the UK! As for imperial sizes, not a chance unless you order from a specialist place online.
RedSpecial, mburkit liked this

    Trivia, callbacks etc I noticed so far *Cover A *[…]

    Matty Trap - Replace Pedal?

    Has anyone successfully transferred the pedal elec[…]

    Any idea when you might get the Goggle metallic la[…]

    Be careful removing the Hasbro weathering using […]