By Mathew_impact1
#4936259
I must admit, the disco lights work pretty well. I'd love to see a video in a darkened room.

Are those the $3 usb type?
By Oxnard Montalvo
#4936311
Have just started modding a Walmart trap myself (sent by a kind US soul over here to the UK).
I've started to get all the bits together for the smoke mod. I've got my pump, and all the requisite cables, but I'm stuck on the vape pen. I watched a few YouTube videos on the subject and it seems like the best type of vape to use is one that has a hole right on the battery terminal inside the pen. The video also mentioned that there were some that didn't have this hole and would need to be drilled. Obviously I'd like to find an 'open hole ' version, but I have no way of knowing which is which sight unseen. Does anyone know if there is any way of telling the two apart by model or specifications?

Thanks in advance!
By Belli
#4936348
I must admit, the disco lights work pretty well. I'd love to see a video in a darkened room.

Are those the $3 usb type?
Yes, the cheap sound activated USB disco lights. I removed the USB plug and soldered wires to the terminals.

Here it is at night. My dog was refusing to leave me alone. Sorry for the jerky bit at the end.

By Mathew_impact1
#4936350
Cool. Thanks for the video. I ordered a pair of the disco lights from eBay to play with.

Purchased an air pump and vape tank. But I had shortend the height if my trap to be more like the prototype. So the pump won't fit in the floor area. My choices are to put it in the cargo area or mount it in back, under the red LED. I have extra room there, as I extended the back by .75 inches.
By debo1218
#4937624
how do i add the brass connector, i tried a bunch of glues and none of them work, and i stripped the screws so i cant open it up, thanks .
By Dr.D
#4937780
Evening fellas. Just wondering, what would be the simplest way to extend the wire running to the footpedal? I'm not looking to totally mod my electronics, my gorilla hands can barely use a screwdriver.
User avatar
By NotSabbat
#4937783
Evening fellas. Just wondering, what would be the simplest way to extend the wire running to the footpedal? I'm not looking to totally mod my electronics, my gorilla hands can barely use a screwdriver.
I used this wire ribbon:
https://www.amazon.com/gp/product/B01D9 ... UTF8&psc=1

Its the cheapest way Ive found to get long lengths of wires. Its very easy to remove two of the wires from the ribbon, strip the ends and connect to the peddle wires.

Hello all, first post. Ive been a fan since 1985 […]

Not before March 2021.

GB1 Hero Build (Bosch Shell)

It took a few months, I got the PPD and BL/FT conv[…]

Anyone good at 3d modeling...?

I might be able to help!