By Upfrontplatypus
#4972671
Hi, so I've just gotten my hands on the spirit ghost trap, the one without the foot pedal, and now I'm trying to figure out how I can add a functioning foot pedal to it. I've got a coax cable and connectors for it already because I was originally going to get a Walmart trap but that ended up falling through because of eBay nonsense, so I got a spirit trap for a low price. If anyone has any ideas or other topics to point me towards I'd appreciate it, I can tolerate not having a working foot pedal on this but man it'd be nice to have one.
By joezlo
#4972960
I'm working on doing this wirelessly using an RF receiver (Based on Holtzman's wireless trap mod to the 84 gear in the IDW comics) & when it's pin goes high it goes to a relay that has a separate power to activate a solenoid. The would also allow the as-is trap audio to work without modification.

The issue is, the levers in the trap that control the gears are in the open position to hold the trap doors closed. So if I want to use the solenoid to open the trap doors by pulling the levers down, somehow I have to reverse the gears direction of turn & that's where I'm stuck right now with out completely overhauling the trap.
By beric
#5000888
I am actively working on this.
The spirit trap comes with an RCA pedal. I took that apart and the mechanism is very simple. I haven't finished yet, and will add pics later, but i'll try to explain with words.
The mechanism is a push button with 2 wires going to the RCA jack. The push button mechanism can live just in front of the hinge. Each of the two wires can go thru the red into the banjo and yellow tubes into the legris, respectively, into the box. The can join and come out together thru the brass foster fitting.
Where I haven't explored yet is how to get that wire to go thru the foster quick connect. Besides being a locking mechanism, the quick connect diameter is too small for the wires.
I have also not explored the trap side of it.
But I will be working on this during this weekend. I am determined to make this work with the only compromise being the RCA jack connecting at the quick connect.
User avatar
By dartdemon340
#5001104
Well, good point. However, the HasLab is a $300~ one time buy trap, unless you bought a half a dozen for spares. I personally wouldn't be using my HasLab trap for most of the stuff I go to. I keep a few Spirits with pedals on hand for beating on and abusing. Cheap, disposable and plentiful.

    Do you have files for the labels you'd be willin[…]

    So, let me get this straight: if I buy the Xiaom[…]

    Yeah, ok, so so far the GB2 light sequence mig[…]

    Hi all, I thought I'd share with you some images […]