Post pictures up of your Props, or a link to your prop gallery on Ghostbusters Fans.
By YouCanStantz
#4936762
Hey now! I'm in the middle of fixing up 3 spirit packs and was wondering if anyone has replaced the tubing from pack to wand? Any recommendations on something less stiff? Thanks!
User avatar
By eastern57
#4937505
You can use Shower Hose. I got some fro home depot. It's a little thinner, about 0.5" (as opposed to the 1" Spirit stock), but it's SUPER flexible and way tougher.
https://www.homedepot.com/p/American-St ... /307246990

Otherwise, you can just cut the Spirit hose to make it split loom. The advantage here is that it's free, you don't even have to detach it, and you get a little more flexibility out of it.

I'd say try cutting the stock hose first, if that's not flexible enough, then you can always replace it with the shower hose.
    Proton Props UK

    Considering David orders most of the parts he do[…]

    Hasbro Ghostbusters

    While you're 100% correct about the function[…]

    Uniform Tips

    It does rain frequently here in London, but not to[…]

    The yellow parts are raw 3D prints, unsanded and u[…]