This is for other Ghostbusters Props that don't fit into the categories above.
#4933257
I'm building a pair of belt gizmos for my son and myself. These are scratch built, not a kit. I had originally planned to use 10mm plastic test tubes with 7 segment LEDs for the display. But after some research, I realised I could use real vfd tubes using a 9v and AA battery. So I purchased 24 used bb8-3 tubes off eBay. Here's the results so far.
Image

It took 2 months for the tubes to arrive. And the first tube I tried was dead. The wait and effort was worth it. The display is static. I'm still waiting for a pair of 4017 circuits to animate this.
Kingpin, cristovalc, JWils23 and 1 others liked this
#4933277
I made a pattern for making the belt gizmo holder.
Image

Should print fine on letter size sheet.

Image

Right now I'm using an old CLC 464 tape holder that I cut. After trimming a bit. It matches the latter ok.
cristovalc liked this
#4933302
Thanks cristovalc.

I'd seen people add Less to backlight the bed tubes or reproduction tubes. But none had light up the tube displays. I'll post a video when I install the chaser circuit.
#4992066
Hi there
I‘d like to know how exactly you got the nixies working with a 9v Battery?

Also I searched for the mentioned Bb8 tubes but couldn’t find any info about them. Can you tell more aboutbthe exact name?

Best
Steven
By Evilchumlee
#4992123
Working on a gizmo of my own. What I can figure out is how to make the upper housing part (all the way that top, the black "bar" that has the little box to the side)

Any suggestions?
User avatar
By Kingpin
#4992180
Evilchumlee wrote: February 11th, 2024, 10:29 am Working on a gizmo of my own. What I can figure out is how to make the upper housing part (all the way that top, the black "bar" that has the little box to the side)

Any suggestions?
Folded aluminium, with either folded tabs, or riveted tabs on the sides to make the "legs" that attach it to the motherboard.

    Artist Kirsten Franson posted concepts, models, bt[…]

    wdNyAdkhdrc A very tempting product from https:[…]

    I use an INA219 voltage/current sensor in my pack […]

    Well there you go - I have to concede that the[…]