User avatar
By echo419
#4919490
Thought I'd try and make at LED graph for my thrower, I figured out I needed 17 of these 2 x 5 mm LED bar lights. I'm going to use an Arduino and shift register modules to control them.
Image

I just needed to paint the sides black or the light will bleed to the adjacent ones.
Image

Here's a few glued and painted together.
Image
jpetrutis81 liked this
User avatar
By echo419
#4919763
I used an LED array module and then programmed it with a picaxe chip (not this exact one but you get the idea). Some day I would love to have a picaxe port installed in my pack the thrower so I can reprogram on the fly

https://www.ebay.co.uk/itm/10-SEGMENT-L ... SwIgNXwqUD
I did see those and have some amber 10 segment LED arrays, I just want to try a more custom look and cram more LEDs in there.
User avatar
By echo419
#4919764
Well the first test was kind of a fail, I didn't realize these LEDs were slightly tapered from front to back. So this caused an arc to form even with a jig I made. Think I'll try gluing them in 4s instead of all at once next time.
Image


Image

Image
User avatar
By NotSabbat
#4919790
I also have an Arduino controlled pack and I am not happy with the pre-made bar-graph I purchased. this seems like a pretty good solution and I am very much looking forward to seeing how it all comes out.
User avatar
By echo419
#4919796
I also have an Arduino controlled pack and I am not happy with the pre-made bar-graph I purchased. this seems like a pretty good solution and I am very much looking forward to seeing how it all comes out.
I'll definitely keep this thread up to date.
NotSabbat liked this
User avatar
By echo419
#4919798
It will be animated, I’m going to use an Arduino to control them.
Forgive me, I'm not understanding why you're painting the LEDs.
the light will bleed to the surrounding OFF leds if the sides aren't blacked out.
NotSabbat liked this
Hi from UK

My Dad’s side of the family are originally f[…]

No, it's "Ru3t City." https://medi[…]

Thought I would post my upgrades to my spirit pack[…]

GBfans new logo

Make the stop sign an actual G. Logo ghost needs t[…]