By Danimaljoe3
#4923675
I was wondering if there was a DIY kit out there for a belt gizmo? I've seen some 3D print files out there, but I don't have my printer anymore and the files weren't exactly accurate. Anyone able to help?
User avatar
By JWils23
Supporting Member
#4923680
Are you looking for something like what’s in this thread? Doug has two different threads in the for sale section for these if you want to check them out. I have the one in this thread and it really is awesome when it’s all put together!
viewtopic.php?f=31&t=30986
User avatar
By Kingpin
Moderator
#4923681
There've been a couple over the years, Nick-a-tron used to produce a resin one, later Spongeface produced a kit which used a printed motherboard with elements you had to solder yourself (an optional function built into the design was a circuit to provide illumination to the nixie tubes). I've no idea if Spongeface is still selling them, but here's his topic: link.
By Danimaljoe3
#4923882
Thanks for the links. I was looking for something along the lines of the just the board and the nixie tube holders, that way I can add the aesthetics and electronics myself. These are good starting points though.
By Rob1
#4923934
There've been a couple over the years, Nick-a-tron used to produce a resin one, later Spongeface produced a kit which used a printed motherboard with elements you had to solder yourself (an optional function built into the design was a circuit to provide illumination to the nixie tubes). I've no idea if Spongeface is still selling them, but here's his topic: link.
He is still selling them. I just purchased one from his Ebay store.
Find the Bumper sticker.

That's amazing and I think you are probably on t[…]

My Spirit Ghost Trap Mod-In-Progress

So for R1 and R2, you're going to need to get a re[…]

Anovos Upgrade Thread

Good News - Pack Shipping as of today, 9/16 - with[…]

There's been rumors of an Indiana Jones vibe to […]