To make the lines I cut out a piece of netting to form Test fit Then I colored it in with sharpie Added the lines and a piece of white paper(to make the sharpie pop) and glued it together with a glue stick. Success ! Shell done on to electronics
8bitGamer1984 wrote: ↑October 10th, 2019, 7:07 pm Hi, I don't think you remember my introduction. So basically I said I would build a ion detecting PKE Meter, and I desided to mod a spirit PKE Meter for the base and add my own electronics. Basically this works though a ion chamber constructed of a copper end cap and a wire though it.. more info here-- https://techlib.com/science/ion.html. Can somebody help me learn how to post images on this site."Real"
Working on soldering and coding the Arduino Nano. Basically when the voltage in the chamber is above or equal to 600mv the wings will open to the fullest and the lights and piezo buzzer will be at the fastest speed. Will upload the code for the project when done.
There is no green light on the blue brick only the[…]
I'm going to release some albums and get a Snake a[…]
How did you wire things to run the trap through th[…]
The one I purchased plugs into sound board sold […]