- January 25th, 2020, 10:20 am#4930420
long story short I wanna change the switch to my blue brick. But I am having a slight wiring issue.
here is the brick opened up with original switch and wiring.
here is the switch I want to use.
Cleaned up the wiring and made them a little longer (more room to play with.)
Right now. I have the single wire to ground. on the switch.
the two black wires to load and the three red wires to led.
When I flip the switch the led turns on but no power is supplied to the pack. (obviously I have something wired wrong.. Any thoughts?
here is the brick opened up with original switch and wiring.
here is the switch I want to use.
Cleaned up the wiring and made them a little longer (more room to play with.)
Right now. I have the single wire to ground. on the switch.
the two black wires to load and the three red wires to led.
When I flip the switch the led turns on but no power is supplied to the pack. (obviously I have something wired wrong.. Any thoughts?