#4948928
Hey all, Adam from the Southeast Ohio GB here. Anyone whos familiar with my builds over the years knows that I from time to time like to mash up elements of the packs for new builds. First some backstory. A few years ago I had started work on a straight up RGB pack for a buddy of mine. We'll the project never was finished because I wasn't happy with the way some parts looked. So I put the pack on the back burner. Finally inspiration struck. Reading interviews with Paul Feig and Katie Dippold, they both said that they used the Real Ghostbusters as a main influence. So I got to thinking what if they'd actually used the RGB design for the packs? So I present my latest build: a Holtzmann engineered RGB pack.

Specs:

The pack is a combo of foamboard, MDF, EVA foam, and 3d printed parts. All the electronics are custom and as a test, I installed an inexpensive, programmable sound chip. Instead of an Alice frame I opened for the cartoon/ATC style straps that are bolted straight to the motherboard. I used a shoulder harness for a leaf blower. I also utilized design elements from the ATC pack such as the piping, lower meter, 2 1/2 in gauge and the gear box is a rescaled cryobox. All in all a solid build that blends the original ATC inspiration and the nostalgia of RGB!

Image
Image
Image
Image
Image

https://imgur.com/UnlmvcB - Lights and sound demo

Questions, comments, otherwise are welcome!
kahuna900, twmedford23, robandliv and 1 others liked this
    NEW Ghostbusters References?

    Spotted somethin' familiar in that Netflix movie T[…]

    GB2 Proton Pack build

    Some of the best weathering I've seen. Very nice[…]

    Thanks, I'll try the code first and see how that g[…]

    Trailer 2 on Ghostbusters Day is what I'm hoping f[…]