Q-man wrote: ↑September 5th, 2021, 12:09 amJWils23 wrote: ↑August 4th, 2020, 9:54 amThat’s a great idea! I just took a small strip of gaffers tape and wrapped it around the end of the tubing, that gave it enough friction to hold things snuggly. Your idea is much more professional though, I may adopt that.
Thanks bud! Nope, they’re actual Legris elbows but they’re 3/16 instead of 4mm. Just slightly bigger but still hold the 4mm tubing well. There’s a guy on eBay who sells them pretty regularly, in fact he just put up a bunch last night. I went through and found the ones that looked the best (minimal cracking/wear) and snagged them.
I went the same route we were probably bidding against each other, and yes they do hold nicely but as I wait for parts. I found if you carefully twist a 6-32 into 4mm tubing(about 1/4'' then cut off excess) the 3/16 elbows will act like a 4mm.
As I wait for the rest of my parts watching builds come together so nicely really helps, beautifully done.
JWils23 wrote: ↑August 28th, 2021, 4:26 pm So here we go, took a little longer than expected because I took so many pictures I had to wade through them and delete things that were duplicates or seemed redundant. I have a lot of pictures so this will be a long post but I hope you all enjoy. I want to say thank you again to everyone on this forum who has contributed to this thread, let me pick their brains in PM's and made build threads in the past that I could pour over looking for details, tips and tricks. To Chris for making such an awesome shell and genuinely being such an awesome guy who I've had the pleasure of getting to know over the past year and a half. RJ over at Freeky Geeky who made several of the aluminum parts including the entire thrower. Eric G for also providing a number of beautiful aluminum parts on this pack. Ron and Arron for some phenomenal lineage parts and the great dry rubs and labels. Doug for the great electronics kits, especially the incandescant LED kit which just looks amazing. The Finchers for the beautiful ribbon cable which makes the GB1 pack. Tommy Medford for the red and yellow Nycoil tubing. And last but not least, a big thank you to AJ for running this site and allowing someone like myself to document this project. Not to mention doing such a great job of stocking the store with great parts and lately the awesome replica parts he's been able to get produced. If I forgot to list anyone I'm very sorry, I tried to keep detailed notes of who and where I got things but please know I'm very grateful!Just an absolute beautiful pack and build. Inspiring. Bravo!
With that said, lets get after it! I was going for a "Spenglers workbench" kind of a vibe, I grabbed some extra parts I have and scattered them around. Also got some of my uniform stuff out to litter the workbench, I figure these guys would probably have stuff scattered about at all times. I'm by no means a photographer and I took all these on my iphone but I did play with the aperture a bit and adjusted to a warmer setting to try and mimic what we saw in the film. Enjoy!
Let me know if there is anything else anyone would like picutres of, inside the shell, mobo etc and I'll gladly take more. Once again thank all of you for being along for the ride on this one with me. It's been a life long dream to build my own full size proton pack. To anyone who browses this thread or this forum who thinks they can't build their own, I felt the same way but trust me you certainly can and I'm proof of that!
The Ghostbusters DVD is a collectable in the g[…]
The front lightbar bugs the crap out of me too! It[…]
The only references I'm finding to an error like t[…]