[obiwanjabroni]

Hi Doug, I've been trying to PM you but for some reason all messages to you seem to be stuck in my outbox. Could you drop me a PM?

Bought a bezel kit from Doug and it's been super easy to work with/assemble. Came quickly too!

[Kingpin]

Hi Doug, I've been trying to PM you but for some reason all messages to you seem to be stuck in my outbox. Could you drop me a PM?

They're not "stuck". Private Messages remain in the outbox until they're read by the recipient.

[SMC164]

GHOSTLABS IS AMAZING!!!

Doug put up with more than he bargained for when I bought from him. I bothered him with questions and with troubleshooting. He was absolutely amazing and my pack is now fully operational and better than I could have imagined.

THANK YOU THANK YOU THANK YOU!!!

[Ectotainment]

A few months back, I purchased a number of Spongeface's upgrade kits for 2 Spirit packs I made for Halloween. Since then I've also purchased some other items for a hero build I'm planning on now and his new Spirit Halloween Radio upgrade board. I can't say enough good things about Doug. His instructions manuals are top notch and his engineering skills speak for themselves. He was always very responsive, helpful and professional. I would recommend his good and services to anyone looking to get into this hobby. Thanks again!

[NickFame13]

I recommend Spongeface to anyone and everyone for his stellar work, quality of products, and spectacular customer support and service! Everything that makes my pack purr is from Spongeface!

[duke009]

I have purchased two kits from Doug, both arrived in a timely manner and up to the highest quality i can give. Highly recommended and will be buying his other kits soon!

[Ubanksy]

How can I buy from him? I'd love proper lights and sounds.

[Kingpin]

How can I buy from him? I'd love proper lights and sounds.

Doug regularly sells items through the Marketplace here, and on eBay.

[mendo222]

Just some words about Doug and his gizmo kit.
Asked if he can build one to me because I'm totally a mess in electronic. Said no, but tell me to contact his friend bill who accept sometime building commission. Contacted bill, said I live in France if he could build a gizmo kit and send it to me.
Just amazing answer : no problem . Bill takes a kit from spongeface assemble it and send it to me with really care about the shipping package.
Delivered and building time : less than one week. Absolutely great building and really awesome kit, even more accurate than the one on the movie itself. All is there , a clip to attache the daughter board to the belt, the clamp to keep your 9v battery in your gizmo holster.
Thanks a lot friends Doug and bill it was a pleasure.

[Nomake Wan]

When someone asks if Spongeface is a god, you say, "YES!!!"

On top of getting some excellent parts for my HasLab Ghost Trap (an adapter to mount an Arcolectric indicator for the pedal, and a mount and CAL-R resistor to make mounting said resistor more seamless), the guy went above and beyond and fabricated from nothing a mount to attach a Sloan 855 indicator socket to the Hasbro Plasma Series Neutrona Wand. I cannot say enough good things about the guy, but look forward to making some more purchases from him going forward. Highly recommended and awesome member of the Ghostbusters community!

Arcolectric adapter for HasLab Ghost Trap Pedal:


HasLab CAL-R Resistor Adapter w/ CAL-R Resistor:


Hasbro Neutrona Wand Sloan 855 Socket Adapter:


Thanks so much!

[kahuna900]

Doug at Ghost Lab 42 does not disappoint. I have purchased most everything he made for the Spirit 80% pack, and they are all top notch and are still going strong after all these years.

His latest trap parts are awesome. I've only installed the trap pedal light so far but dang, this thing looks and works better than the stock LED. Actually, one of my pedals had a bad LED that would barely light up, Doug's option bypassed the problem and saved me the trouble of sending it into Hasbro and waiting for a replacement.

This thing looks great when not lit and incredible and bright when the power hits!



Thanks again Doug for all you do for the community, and I look forward to installing the Plug-n-Play Accurate Switch and Indicator over the weekend.

[kahuna900]

Another great mod from Doug at Ghost Lab 42. I was a little hesitant to do this mod because I had to drill and dremel some of the plastic to install the board. To my surprise, it was so easy to install and looks incredible! I'm going to order another set for my second trap and pedal!




Thanks again Doug!

[kahuna900]

Now I was very hesitant to attempt the "Custom Brass Fittings & Tubing" kit, as it takes some tricky dremeling to get the job done. But after a good 'ol fashioned pep talk from the man himself, Doug convinced me to give it a try. My biggest concern was the dremling of the top portion of the box that houses the the brass fitting. I was worried I would mess it up and the brass fitting wouldn't cover my mistakes.

I was very careful, taking my time with the dremel speed set pretty slow and it turns out it was easier than I thought. The tricky part for me was using the dremel to carve out the mount on the inside as it needed to be flat for the nut. Again, took my time and made the cuts need to secure the brass fitting without screwing anything up.



I was kinda on the fence about whether I wanted to change the brass fittings at all as I thought I was happy with the stock setup. But damn, after getting the new kit installed, it makes such a big difference I can't wait to get started on my second pedal.

[kahuna900]

Another great addition from Doug at Ghost Lab 42.

Even though I had already purchased a few different options for the bar graph, I really liked how Doug's had the elevated acrylic lens which looks more like the screen used traps. This mod is very easy to do, and I did take Doug's advice and super glue the lens to the top plate.

[kahuna900]

Doug from Ghost Lab 42 has done it again. I never liked the sunken LED next to the bar graph , another misstep by Hasbro if you ask me, that should have been included stock. After grabbing most of Doug's previous mods for the trap, I asked him if he ever thought of creating an LED lens for the trap that would more closely resemble the one seen in all the reference photos of the screen used traps. Within a few days, he had created and printed a fix that looks incredible. The little orange lens even has a black area at the bottom, which makes it look even more realistic. You do have to enlarge the stock hole just a bit, but it was super easy. I added just a bit of super glue to hold it in place and the end result is pretty cool.



So thankful that there are people like Doug out there, willing to take the time to create these great mods for us. I wouldn't even know where to start and it blows my mind what these creators can accomplish in such a short time.

Thanks again Doug!!!!