[beany302006]

Where can I find the micro toggle switch with the 2 pin jst connectors the wires on mine came off

[Thatcrazysquidguy]

Did the wires separate from the switch or the connector?

[beany302006]

The wires came off of the toggle switch

[beany302006]

I bought new micro toggle switches from Walmart and had to grind thown the connector to fit inside the pin holder

[beany302006]

I bought new micro toggle switches from Walmart and had to grind down the connector to fit inside the pin holder

[beany302006]

I dont have a tabletop repair kit to solder the wires back on and I accidentally cut the connector off very close to the connector by accident

[Thatcrazysquidguy]

You can get some solder, a soldering iron, and some heat shrink tubing from Walmart. If there is any of the metal post left you should be able to solder the wire to it.