#4911184
Hi, new to prop building but as a kid of the 80's a Proton pack has been on my want list forever! I have the trap, the pke and suit..so now the main tool! waiting on my benofkent kit to arrive but so far have my ALICE frame ready, got my paints ready. Can't wait! :D
Very nervous as I've never done anything to this scale and its an expensive project to mess up! anyone with experience with a BoK kit drop advice please haha still need to source a Dremel tool and borrow a drill from a friend for the project XD
Image
Image
Image
Image
Image
Last edited by CorfieldUK81 on December 6th, 2018, 10:57 am, edited 2 times in total.
User avatar
By Banjo
#4911187
Good start!
your story sounds a lot like mine. Now I'm older and can build that pack I longed for as a kid.
I'm looking forward to see how your build goes.
By CorfieldUK81
#4911255
Slowly working on my BoK kit. It and him is a pleasure to work with.
yeah he has been a great help with any questions I've had. Any tips would be great if you have any too ;) do you have photos / thread of your build?
User avatar
By canpara
Supporting Member
#4911332
Great start! I have bookmarked your build thread and I will follow it with great interest.

I too was very nervous when I started my proton pack build. I learned the skills as I went along. I think the key was doing as much research as I could on other peoples' build threads and asking for peoples' advice in my own thread.

If you ever get stuck, remember that Ben offers great service on his pack kits... He was very prompt when replying to me on Facebook Messenger.

Good luck!
User avatar
By canpara
Supporting Member
#4911333
But I have used Canpara's build thread for help. http://www.gbfans.com/forum/viewtopic.php?f=2&t=42368
Sadly he didn't use the BoK thrower so I may be on my own for that.
I'm happy that my build thread is of use to you! That's correct: I used a Freeky Geeky wand for my build. Nonetheless, Ben's wand seems quite elegant to put together. I hope you can share some of your progress with us when you get to that phase of your build.
Spectregater liked this
#4911342
Awesome start mate. I too was really nervous when I built my first pack. Just take your time, use the right tools for the right jobs and you'll be sweet. Measure 400 times and drill once!! Good luck
canpara liked this
#4911352
got my kit eager to get started just wondering if anyone could help out with one thing I'm trying to work out,, and idea what screws I need to buy and where from? video ben linked me showing how to install the tubes needed a 5.5 mm self tapping screw but when looking for those still unsure what ones to get :| and what ones to buy to use on the bumper. Thoughts? places to buy in the uk would be great help!
#4911372
Is that the way the hole came cut. Mine fits perfectly, but it has a perfect circle.
no this is from me dremeling to try and make my tube fit. Turns out I was sent a tube that was too big and explains why mine didn't just fit perfectly like others did and per Bens instructions :\ he is sending me out a replacement smaller tube and hopefully can repair with filler fingers crossed
#4911395
Today I decided all I could really do while I wait on metal parts from Benofkent is to try the most daunting part for me. Cutting holes !
Most tricky was the hole for the hose just under where the crank knob goes as my drill was obstructed by the shell, I had to drill a hole then use a dremel to do the rest. The hole for the Ribbon cable and the hose for the wand I used a hole cutter. First time using one of these so practice was done on cardboard first to find right size. Turned out great in the end so was happy with that!
Image
Image
Image
#4911418
I still have yet to get a good hole drilled by the crank generator. Wish it was hollow inside there instead of being solid resin.
If you mean the hole for the hose like in above picture, I had to drill a hole with a large drill bit, then largen the hole step by step with a dremel, then I'd turn over the shell and smoothen out the path with a dremel till hose fit in.

Tip : if you do the hole with a hole cutter near the N-Filter for the hose you can use the circle that is left over as a template to draw around on the crank, template can also be used to mark your spot for the ribbon cable too.

Very nice! I've been trying to purchase a shell fr[…]

I still have yet to get a good hole drilled by […]

The Real Ghostbusters Gear

In general. I can't even do a 20mm calibration cub[…]

Heya from Australia

http://i.imgur.com/1kB7fOZ.jpg