Jump to navigation Jump to search

The Cyclotron is the circular "pan shaped" structure on top of the Synchronous Generator on the pack shell. One section is missing on the bottom allowing for the placement of the N-Filter.

The Cyclotron has four holes, each with a "Cyclotron Ring" or washer around them; the top two rings have a slightly larger outer diameter than the bottom two rings (yet the inner diameter appears to be the same for all four rings). There are red filters behind each of these holes.

The Cyclotron also had a hole drilled in the center for the Ion Knob to be fitted through and tightened on the back side as part of the GB2 re-fit. This hole was not present in GB1.



1526_4531206526.jpg ]