|
 | This Page Needs Your Help!We need your help to finish this page. If you are knowledgabe about this subject, please feel free to Revise This Page and add information. |
|
[Link] [Revise]Aluminum 1590A Box
|
The large project boxes used on the Ghost Trap's pedal is part #1590A and is made by Hammond Manufacturing. The 1590A is a cast aluminum box that is shorter and longer then the other .The Foster #B22-2 is mounted on the end of this box as well as the banjo fitting (on top) and straight fitting on the opposite end.
Its dimensions measure: 3.64" X 1.52" X 1.06".
|
[Link] [Revise]Plastic 1591L Box
|
The project boxes used on the Ghost Trap's pedal is part #1591L-SBK and is also made by Hammond Manufacturing. This one is available in either Polystyrene, or ABS Plastic, and is the box which the Relay and octal socket sits on top of. The 20 pin ribbon cable is also attached to this box by its connector.
Its dimensions are: 3.3" X 2.2" X 1.4".
|
|
This page was last edited by irricanian on January 2, 2009, 8:56 am
Link to this page: http://www.gbfans.com/equipment/ghost-trap/hammond-project-boxes/
|
|
 |
|
