Nycoil

Since its inception in 1958, Nycoil has recognized the importance of Innovation. From the introduction of the original Self-Storing Air Hose over fifty years ago to the more recent development of our state of the art Poly-Matic Push-To-Connect Fittings, Nycoil has established itself as a leader in the Fluid Power and Industrial markets.Banjo ElbowTwo 4mm Nycoil banjo elbows are found on the Proton Gun barrel. The Nycoil style elbow is a feature of the Ghostbusters 2 pack. Nycoil later updated the elbow to feature a flanged red insert. The brass body remained the same. Nycoil still offers the banjo elbow today, only it is now about a 1/4'' shorter, is nickel plated and still features a flanged red insert. Nycoil banjo elbows are also found on the Ghost Trap Pedal in Ghostbusters 2.TubingThe actual tubing used on the pack is a contenteous issue as are the sizes and lengths used. Here is a basic guideline: 5/32" Red tubing - 4 ft needed
Installed from the elbow fittings on the HGA and Cyclotron to the straight fittings below the PPD (Note: some use 1/4" tubing here), also used between the two banjo fittings on the gun tip. 1/4" Blue tubing - 2 ft needed Installed from the injector tube to cyclotron, from the PPD to the base of the Dale RH-50 and from the top of the RH-50 to the brass elbow fitting 1/4" Red tubing- 3 ft needed
Installed on the injector to the cyclotron and the beam line to the brass elbow on the HGA 1/4" Green tubing -1 ft needed Installed on the gun from the brass barb on the rear instrument bar to the brass barb on the rear cylinder 5/32" yellow -1 ft needed Installed on the Sage resistor on the Ion arm to the Legris elbow on the underside of the Ion arm (Note: some use 1/4" tubing here)