I'm just a geek who loves Ghostbusters, Sci-Fi and Fantasy in general. I'm not sure what else to write other than I like to DIY things and usually work with EVA foam and foam board. Though I have been known to repurpose other things to make things. I once took two pizza pans and riveted them together and made a buckler shield. I JB weld the seam between both of them and sanded it smooth so you couldn't tell it was two metal plates pressed together. Then I've made a GL ring using craft foam and lots of wood glue to make it hard and able to be painted and withstand being worn all day long. The ring part is not foam, I made that using metal clay.
So, yeah, I'm just a geek that can make things when she puts her mind to it.
Member sinceJanuary 21, 2019
LocationFlorida, United States
Forum posts0
Sign in to post on Gatchigirl's wall.
Started a forum topic: How to remove Spengler Wand S hook removal
As the title states, how to remove the Spengler Wand S hook. I found the screw on the inside of the gun rail and removed it, the S hook will turn about a 1/8 of the way, but won’t come up and off. Am I missing something here? Picture to show which screw I’m referring to. I am going to be repainting …
Read moreStarted a forum topic: How to remove Spengler Wand S hook removal
As the title states, how to remove the Spengler Wand S hook. I found the screw on the inside of the gun rail and removed it, the S hook will turn about a 1/8 of the way, but won’t come up and off. Am I missing something here? Picture to show which screw I’m referring to. I am going to be repainting …
Read moreStarted a forum topic: Halloween.com PKE Meter battery mod
I decided to add a rechargeable battery pack and charging port to my Halloween dot com PKE Meter. This thing is a slightly more screen accurate on the case. The handle is more square than the Spirit/Rubies one but shares the electronics from it. I also changed out the LED’s in the wings because they…
Read moreStarted a forum topic: Halloween.com PKE Meter battery mod
I decided to add a rechargeable battery pack and charging port to my Halloween dot com PKE Meter. This thing is a slightly more screen accurate on the case. The handle is more square than the Spirit/Rubies one but shares the electronics from it. I also changed out the LED’s in the wings because they…
Read moreStarted a forum topic: Side knob......
I decided to go a different route with my Ecto Goggles. I looked up the AN/PVS-5a Night Vision goggles and noticed that the knobs on the side were different than what was used on the prop. So I went and made my own and just need some cleanup after I 3D printed them. Here’s a couple of photos. and
Read moreStarted a forum topic: Side knob......
I decided to go a different route with my Ecto Goggles. I looked up the AN/PVS-5a Night Vision goggles and noticed that the knobs on the side were different than what was used on the prop. So I went and made my own and just need some cleanup after I 3D printed them. Here’s a couple of photos. and
Read moreStarted a forum topic: Thumbwheel.....
First off let me just say this past year has been one heck of a ride and why I haven’t been on much or at all. Now for my question. What thumbwheel would be good for the control of the PKE Meter like they used in the movie? I’m building a 3D printed one and have the space in the back for one. I’m …
Read moreStarted a forum topic: Thumbwheel.....
First off let me just say this past year has been one heck of a ride and why I haven’t been on much or at all. Now for my question. What thumbwheel would be good for the control of the PKE Meter like they used in the movie? I’m building a 3D printed one and have the space in the back for one. I’m …
Read moreStarted a forum topic: Grip color.....
Sorry been away for so long. Lots going on personally, what with family and then the pandemic hitting. But I’m back now and am 3D printing my pack and the grips on the neutrona wand, what color are they? I have seen things saying they are black but then others say they should be brown and wood like. …
Read moreStarted a forum topic: Grip color.....
Sorry been away for so long. Lots going on personally, what with family and then the pandemic hitting. But I’m back now and am 3D printing my pack and the grips on the neutrona wand, what color are they? I have seen things saying they are black but then others say they should be brown and wood like. …
Read more