Hey everyone,
I had a quick question about the possibility of flying with a proton pack as checked baggage on a plane. I live in Alaska and I plan to make it down to Dragoncon this year for the PKE surge. HOWEVER, as you can imagine, I have to fly there, pack and all. I’ve been trying to figure out…
Hey everyone,
I had a quick question about pack shells. I was just thinking about the idea of making a second “stunt pack” that was made out of a cast foam or rubber mold shell instead of fiberglass for casual events and things like fun runs, ect. Something easier to transport, lower detail, less p…
Good afternoon everyone. I just got my PKE in from Spirit Halloween and I decided to immediately take it apart for documentation purposes. It seems to tear down very easily, only six small phillips head screws secure the shells together. When the shells are apart, the belt clip is held on with a sin…
Does anyone know of a good source for low profile reflectors for the cyclotron? I’m currently using some cheap flashlight reflectors that have been working fine, but now I’ve run into an issue where a speaker I’ve installed is just a liiiiiiiiiittle too tall and I have to install it kind of weirdly …
Does anyone else have issues with the idle rumble on the GBFans Sound Kit having this bad distortion? Every other sound works pretty great, but that rumble just doesn’t agree with any speaker I hook up to it.
I discovered this paint today while looking for a substitute to the Krylon Italian Olive. I wasn’t too happy with the finish I got out of it and desired something a bit darker. I stumbled upon this model paint today and it seems like a pretty damned close match.
Tamiya TS-28 Olive Drab 2
[image]
<a href="http://www.amazon.com/Tamiya-TS-28-Olive-Spray-Lacquer/dp/B000BN7DKG" class="onebox" target="_blank" rel="noopener nofollow ugc">h…</a>
I’ve recently acquired a pchrisbosh1 shell which included an aluminum n-filter. I’m actually having some trouble figuring out what I need to do to not mess up attaching this n-filter to the shell. I’ve seen that some people cut the n-filter to fit the shell, but usually that has a molded filter alre…
I was curious if anyone knew the proper nut size that would fit the hat lights on the proton gun. I don’t have the socket for them, but I plan to just attach it to the gun using a nut and fishing the LED into it. I figure that would be a cleaner solution than epoxying it in permanently.
[image]
So, I’ve tried looking around for this answer myself, but I haven’t had much luck. It may seem like a bit of a silly question, but I was wondering how exactly the acrylic tube for the wand tip actually attaches to the grip of the proton gun. Does it hold on with friction alone?
I’m using a Throwing…
Hello everyone. I just had a quick question regarding the chip module that is on the GBFans Amplified Sound Board. I noticed that we have blue sound chip modules in the store that appear to be a bit longer than the green one in the GBFans kit. I was wondering if this could be used as a secondary chi…
Sign in to post on sentientpie's wall.
Started a forum topic: Flying with Proton Pack
Hey everyone, I had a quick question about the possibility of flying with a proton pack as checked baggage on a plane. I live in Alaska and I plan to make it down to Dragoncon this year for the PKE surge. HOWEVER, as you can imagine, I have to fly there, pack and all. I’ve been trying to figure out…
Read moreStarted a forum topic: Foam or Rubber Pack Shells?
Hey everyone, I had a quick question about pack shells. I was just thinking about the idea of making a second “stunt pack” that was made out of a cast foam or rubber mold shell instead of fiberglass for casual events and things like fun runs, ect. Something easier to transport, lower detail, less p…
Read moreStarted a forum topic: Spirit Halloween PKE Teardown Photos
Good afternoon everyone. I just got my PKE in from Spirit Halloween and I decided to immediately take it apart for documentation purposes. It seems to tear down very easily, only six small phillips head screws secure the shells together. When the shells are apart, the belt clip is held on with a sin…
Read moreStarted a forum topic: Low profile Cyclotron reflectors?
Does anyone know of a good source for low profile reflectors for the cyclotron? I’m currently using some cheap flashlight reflectors that have been working fine, but now I’ve run into an issue where a speaker I’ve installed is just a liiiiiiiiiittle too tall and I have to install it kind of weirdly …
Read moreStarted a forum topic: GBFans Sound Kit Rumble Distortion
Does anyone else have issues with the idle rumble on the GBFans Sound Kit having this bad distortion? Every other sound works pretty great, but that rumble just doesn’t agree with any speaker I hook up to it.
Read moreStarted a forum topic: Possibly one of the best Ecto Goggle paint colors
I discovered this paint today while looking for a substitute to the Krylon Italian Olive. I wasn’t too happy with the finish I got out of it and desired something a bit darker. I stumbled upon this model paint today and it seems like a pretty damned close match. Tamiya TS-28 Olive Drab 2 [image] <a href="http://www.amazon.com/Tamiya-TS-28-Olive-Spray-Lacquer/dp/B000BN7DKG" class="onebox" target="_blank" rel="noopener nofollow ugc">h…</a>
Read moreStarted a forum topic: pchrisbosh1 shell N-filter question
I’ve recently acquired a pchrisbosh1 shell which included an aluminum n-filter. I’m actually having some trouble figuring out what I need to do to not mess up attaching this n-filter to the shell. I’ve seen that some people cut the n-filter to fit the shell, but usually that has a molded filter alre…
Read moreStarted a forum topic: Hat light nut size
I was curious if anyone knew the proper nut size that would fit the hat lights on the proton gun. I don’t have the socket for them, but I plan to just attach it to the gun using a nut and fishing the LED into it. I figure that would be a cleaner solution than epoxying it in permanently. [image]
Read moreStarted a forum topic: Wand tip question
So, I’ve tried looking around for this answer myself, but I haven’t had much luck. It may seem like a bit of a silly question, but I was wondering how exactly the acrylic tube for the wand tip actually attaches to the grip of the proton gun. Does it hold on with friction alone? I’m using a Throwing…
Read moreStarted a forum topic: GBFans Amplified Sound Board Chip
Hello everyone. I just had a quick question regarding the chip module that is on the GBFans Amplified Sound Board. I noticed that we have blue sound chip modules in the store that appear to be a bit longer than the green one in the GBFans kit. I was wondering if this could be used as a secondary chi…
Read more