Hi All,
Thought i’d share some pic’s of my <a href="https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="belt gizmo" data-autolink-id="2648">belt gizmo</a> & holder I made for ComicCon UK 2017.
The holder was made from a template I found on the internet cut out of bendable cardboard with a PVC material glued over the cardboard and sprayed black. I then assembled using pop rivets, washers …
Hi All,
Thought i’d share some pic’s of my <a href="https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="belt gizmo" data-autolink-id="2648">belt gizmo</a> & holder I made for ComicCon UK 2017.
The holder was made from a template I found on the internet cut out of bendable cardboard with a PVC material glued over the cardboard and sprayed black. I then assembled using pop rivets, washers …
Hi All,
Thought i’d share some pic’s of the <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto Goggles</a> I built for UK ComicCon 2017.
I’ll be the first to admit, they are not screen accurate but I think they turned out pretty well and was fairly cheap.
The build is based on welding goggles bought through eBay and the lens where made from …
Hi All,
Thought i’d share some pic’s of the <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto Goggles</a> I built for UK ComicCon 2017.
I’ll be the first to admit, they are not screen accurate but I think they turned out pretty well and was fairly cheap.
The build is based on welding goggles bought through eBay and the lens where made from …
Hi All,
I’m sure this has been covered a million times but i’m a newbie in need of advice.
I’m in the middle of a wand build which is a bit of a Frankenstein monster.
The wand kit is a Benofkent with Nickatron additions and Jupiter wand light board.
Its no where near the level of some of the bui…
Hi All,
I’m sure this has been covered a million times but i’m a newbie in need of advice.
I’m in the middle of a wand build which is a bit of a Frankenstein monster.
The wand kit is a Benofkent with Nickatron additions and Jupiter wand light board.
Its no where near the level of some of the bui…
Hi All,
My name is Si and i’m a life long GB fan from the UK. Well not life long as I was 4 when the movie came out LOL.
I love GB because its timeless and still has the same comedic impact and excitement as it did the first time I saw it. Least now the ghost in the library doesn’t make me hide be…
Hi All,
My name is Si and i’m a life long GB fan from the UK. Well not life long as I was 4 when the movie came out LOL.
I love GB because its timeless and still has the same comedic impact and excitement as it did the first time I saw it. Least now the ghost in the library doesn’t make me hide be…
Sign in to post on STARR69's wall.
Started a forum topic: Scratch built belt gizmo and holder with Knightrider chaser LED's
Hi All, Thought i’d share some pic’s of my <a href="https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="belt gizmo" data-autolink-id="2648">belt gizmo</a> & holder I made for ComicCon UK 2017. The holder was made from a template I found on the internet cut out of bendable cardboard with a PVC material glued over the cardboard and sprayed black. I then assembled using pop rivets, washers …
Read moreStarted a forum topic: Scratch built belt gizmo and holder with Knightrider chaser LED's
Hi All, Thought i’d share some pic’s of my <a href="https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="belt gizmo" data-autolink-id="2648">belt gizmo</a> & holder I made for ComicCon UK 2017. The holder was made from a template I found on the internet cut out of bendable cardboard with a PVC material glued over the cardboard and sprayed black. I then assembled using pop rivets, washers …
Read moreStarted a forum topic: Scratch built budget GB1 Ecto Goggles
Hi All, Thought i’d share some pic’s of the <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto Goggles</a> I built for UK ComicCon 2017. I’ll be the first to admit, they are not screen accurate but I think they turned out pretty well and was fairly cheap. The build is based on welding goggles bought through eBay and the lens where made from …
Read moreStarted a forum topic: Scratch built budget GB1 Ecto Goggles
Hi All, Thought i’d share some pic’s of the <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto Goggles</a> I built for UK ComicCon 2017. I’ll be the first to admit, they are not screen accurate but I think they turned out pretty well and was fairly cheap. The build is based on welding goggles bought through eBay and the lens where made from …
Read moreStarted a forum topic: Newbie in need of advice with Jupiter wand lights
Hi All, I’m sure this has been covered a million times but i’m a newbie in need of advice. I’m in the middle of a wand build which is a bit of a Frankenstein monster. The wand kit is a Benofkent with Nickatron additions and Jupiter wand light board. Its no where near the level of some of the bui…
Read moreStarted a forum topic: Newbie in need of advice with Jupiter wand lights
Hi All, I’m sure this has been covered a million times but i’m a newbie in need of advice. I’m in the middle of a wand build which is a bit of a Frankenstein monster. The wand kit is a Benofkent with Nickatron additions and Jupiter wand light board. Its no where near the level of some of the bui…
Read moreStarted a forum topic: Hi from West Bromwich in the UK
Hi All, My name is Si and i’m a life long GB fan from the UK. Well not life long as I was 4 when the movie came out LOL. I love GB because its timeless and still has the same comedic impact and excitement as it did the first time I saw it. Least now the ghost in the library doesn’t make me hide be…
Read moreStarted a forum topic: Hi from West Bromwich in the UK
Hi All, My name is Si and i’m a life long GB fan from the UK. Well not life long as I was 4 when the movie came out LOL. I love GB because its timeless and still has the same comedic impact and excitement as it did the first time I saw it. Least now the ghost in the library doesn’t make me hide be…
Read more