Unfortunately, buying a car for an Ecto conversion is way out of my budget right now, but I’ve recognized an opportunity to do something similar as part of my cosplay. Much like any other Ghostbusters cosplayer, I’m going transport my pack in a rolling tool chest (the <a href="https://www.homedepot.com/p/205502769" rel="noopener nofollow ugc">DeWalt Tough Chest</a>, to be speci…
Unfortunately, buying a car for an Ecto conversion is way out of my budget right now, but I’ve recognized an opportunity to do something similar as part of my cosplay. Much like any other Ghostbusters cosplayer, I’m going transport my pack in a rolling tool chest (the <a href="https://www.homedepot.com/p/205502769" rel="noopener nofollow ugc">DeWalt Tough Chest</a>, to be speci…
I normally use Tapatalk to access the forum and when I try to use it, I get a pop-up saying that the forum software is being updated, but judging from the fact that I’m posting right now, it seems that there’s some error somewhere.
Also, I’m trying to place an order and when I try to select PayPal …
I normally use Tapatalk to access the forum and when I try to use it, I get a pop-up saying that the forum software is being updated, but judging from the fact that I’m posting right now, it seems that there’s some error somewhere.
Also, I’m trying to place an order and when I try to select PayPal …
The screws that come with the pack Clippard valve seem like they won’t be sufficient to secure it to the shell. Is there a specific alternative option that should be used?
What’s everyone’s preferred options for hardware to mount the GBFans electronics to a GBFans shell/mobo and a ThrowingChicken w…
The screws that come with the pack Clippard valve seem like they won’t be sufficient to secure it to the shell. Is there a specific alternative option that should be used?
What’s everyone’s preferred options for hardware to mount the GBFans electronics to a GBFans shell/mobo and a ThrowingChicken w…
Alright, so this’ll be the third pack I’ve started and the second I finish.
My first scratch-built pack took way too much time and effort to build and I’m not doing that again. I tried to 3D print a pack but then I think my print bed got bent so the printer is kaput.
Now I’m on to a shell build. T…
Alright, so this’ll be the third pack I’ve started and the second I finish.
My first scratch-built pack took way too much time and effort to build and I’m not doing that again. I tried to 3D print a pack but then I think my print bed got bent so the printer is kaput.
Now I’m on to a shell build. T…
The straights are 3175 04 10 and the elbows are 3109 04 10. I believe the straights and elbows on the slime blower are both 08 10 rather than 04 10, though I could be wrong. I can’t find a part number for the banjos. I’ve found modern versions of the fittings on Amazon for cheap and I’m making a hyb…
The straights are 3175 04 10 and the elbows are 3109 04 10. I believe the straights and elbows on the slime blower are both 08 10 rather than 04 10, though I could be wrong. I can’t find a part number for the banjos. I’ve found modern versions of the fittings on Amazon for cheap and I’m making a hyb…
Sign in to post on TheKevinShow's wall.
Started a forum topic: Beginning the Ecto 1/8
Unfortunately, buying a car for an Ecto conversion is way out of my budget right now, but I’ve recognized an opportunity to do something similar as part of my cosplay. Much like any other Ghostbusters cosplayer, I’m going transport my pack in a rolling tool chest (the <a href="https://www.homedepot.com/p/205502769" rel="noopener nofollow ugc">DeWalt Tough Chest</a>, to be speci…
Read moreStarted a forum topic: Beginning the Ecto 1/8
Unfortunately, buying a car for an Ecto conversion is way out of my budget right now, but I’ve recognized an opportunity to do something similar as part of my cosplay. Much like any other Ghostbusters cosplayer, I’m going transport my pack in a rolling tool chest (the <a href="https://www.homedepot.com/p/205502769" rel="noopener nofollow ugc">DeWalt Tough Chest</a>, to be speci…
Read moreStarted a forum topic: Unable to check out or access forum via Tapatalk
I normally use Tapatalk to access the forum and when I try to use it, I get a pop-up saying that the forum software is being updated, but judging from the fact that I’m posting right now, it seems that there’s some error somewhere. Also, I’m trying to place an order and when I try to select PayPal …
Read moreStarted a forum topic: Unable to check out or access forum via Tapatalk
I normally use Tapatalk to access the forum and when I try to use it, I get a pop-up saying that the forum software is being updated, but judging from the fact that I’m posting right now, it seems that there’s some error somewhere. Also, I’m trying to place an order and when I try to select PayPal …
Read moreStarted a forum topic: A couple of hardware questions
The screws that come with the pack Clippard valve seem like they won’t be sufficient to secure it to the shell. Is there a specific alternative option that should be used? What’s everyone’s preferred options for hardware to mount the GBFans electronics to a GBFans shell/mobo and a ThrowingChicken w…
Read moreStarted a forum topic: A couple of hardware questions
The screws that come with the pack Clippard valve seem like they won’t be sufficient to secure it to the shell. Is there a specific alternative option that should be used? What’s everyone’s preferred options for hardware to mount the GBFans electronics to a GBFans shell/mobo and a ThrowingChicken w…
Read moreStarted a forum topic: Kevin’s movie amalgamation pack build
Alright, so this’ll be the third pack I’ve started and the second I finish. My first scratch-built pack took way too much time and effort to build and I’m not doing that again. I tried to 3D print a pack but then I think my print bed got bent so the printer is kaput. Now I’m on to a shell build. T…
Read moreStarted a forum topic: Kevin’s movie amalgamation pack build
Alright, so this’ll be the third pack I’ve started and the second I finish. My first scratch-built pack took way too much time and effort to build and I’m not doing that again. I tried to 3D print a pack but then I think my print bed got bent so the printer is kaput. Now I’m on to a shell build. T…
Read moreStarted a forum topic: Is there a complete list of all of the part numbers for the Legris fittings?
The straights are 3175 04 10 and the elbows are 3109 04 10. I believe the straights and elbows on the slime blower are both 08 10 rather than 04 10, though I could be wrong. I can’t find a part number for the banjos. I’ve found modern versions of the fittings on Amazon for cheap and I’m making a hyb…
Read moreStarted a forum topic: Is there a complete list of all of the part numbers for the Legris fittings?
The straights are 3175 04 10 and the elbows are 3109 04 10. I believe the straights and elbows on the slime blower are both 08 10 rather than 04 10, though I could be wrong. I can’t find a part number for the banjos. I’ve found modern versions of the fittings on Amazon for cheap and I’m making a hyb…
Read more